Roland Guitar Synth for Pedal Steel - Any Interest?
Moderator: Shoshanah Marohn
- Karl Truitt
- Posts: 28
- Joined: 30 Apr 2013 11:51 am
- Location: Michigan, USA
Roland Guitar Synth for Pedal Steel - Any Interest?
Hi Guys
I am building a pickup for my Roland Guitar Synthesizer model GR-20. The pick-up will be positioned over strings 3,4,5,6, 8,10 (E9) and will interface with the GK-3 controller. I'm not really sure how it will mount but I'm shooting for a non-destructive method just behind the regular pickup. I'm wondering if there is any interest out there for something like this. You would need to buy or own the Roland system and I modify the pickup for you.
Thanks
I am building a pickup for my Roland Guitar Synthesizer model GR-20. The pick-up will be positioned over strings 3,4,5,6, 8,10 (E9) and will interface with the GK-3 controller. I'm not really sure how it will mount but I'm shooting for a non-destructive method just behind the regular pickup. I'm wondering if there is any interest out there for something like this. You would need to buy or own the Roland system and I modify the pickup for you.
Thanks
- John McClung
- Posts: 5106
- Joined: 4 Aug 1998 11:00 pm
- Location: Olympia WA, USA
- Contact:
I'm mildly interested in this, Karl. Any general idea of what the price would be? Would string 9 be part of the synth mix as well?
E9 INSTRUCTION
If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
-
- Posts: 338
- Joined: 9 Apr 2007 6:56 am
- Location: Reno,Nevada USA
- Larry Allen
- Posts: 1321
- Joined: 5 Apr 2004 12:01 am
- Location: Kapaa, Kauai,Hawaii
Roland
I set mine up to pick up 10-3 on a Sho-Bud Ext E9..Larry
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- Nathan Guilford
- Posts: 381
- Joined: 27 May 2011 12:28 pm
- Location: Oklahoma City
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 4643
- Joined: 17 Feb 2004 1:01 am
- Location: Arkansas,
Roland
Karl is this the Roland synth that gives you a sax sound fiddle etc? If so I'd be interested for sure!
- Dan Kimpel
- Posts: 99
- Joined: 10 Mar 2017 12:47 pm
- Location: Pewaukee, Wisconsin, USA
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
steel synth
The innards of my GR1 Roland synth and GK2 are string-specific, designed for a six string / channel input. That's why it's possible to simultaneously program each string to a different sound (patch). In other words, each pole is a separate independent channel running to the synth along the 13-wire cord. It'd seem this synth-pickup couldn't do more than 6 strings, without some magic. BUT, electroharmonix has a killer organ synth in a stompbox (one's for sale in SGF now). Totally different approach, for any electronic instrument signal on a guitar cord.
-
- Posts: 69
- Joined: 22 May 2012 6:42 pm
- Location: California, USA
-
- Posts: 69
- Joined: 22 May 2012 6:42 pm
- Location: California, USA
-
- Posts: 69
- Joined: 22 May 2012 6:42 pm
- Location: California, USA
- memphislim
- Posts: 1139
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Texas
- Contact:
- Tal Herbsman
- Posts: 205
- Joined: 11 Sep 2015 7:47 am
- Location: Wisconsin, USA
-
- Posts: 420
- Joined: 18 Jan 2011 1:52 pm
- Location: South Australia, Australia
I would suggest that anyone who is vaguely interested in these concepts, join "vguitarforums.com".
From there your exploration will be a lot easier and more complete.
There are other options aside from using the original Roland GK pickup that will allow you to access both 'hard' and 'soft' synths, and ways of "breaking-out" separate string signals for individual processing as well.
At least one company (http://www.cycfi.com/category/electronics/pickups/) manufactures individual string pickups that can possibly be adapted to the multi-string setups of steels, but it should be noted that all current (and past) Roland guitar-synth units are only capable of receiving and processing a maximum of six string signals; they also need a multicore cable with a 13-pin DIN jackplug to connect the output of the guitar to the synth unit, and that is AFTER the signal from the pickup passes through an on-board pre-amp board mounted somewhere on or in the instrument.
For any effects that also use a volume pedal in their creation, that pedal would have to be located between the eventual synth unit and the amplifier, or assign the inbuilt pedal of the synth-unit itself (incorporated in the Roland GR33, GR-55 or GP-10) to the 'volume' parameter.
The placement of a 'synth' pickup (of any sort) within the instrument is an important aspect of the design, particularly with regard to the eventual performance of the system in 'tracking' and 'cross-talk' (between individual string signals).
As has been mentioned, the Roland SY-300 is designed to accept a 'summed' signal through a normal 1/4" jackplug, but loses out in adaptability because it depends upon de-coding that signal to perform its results. Hitting it with more than six or seven strings will possibly make life even harder in that regard.
Playing 'technique' on a six-string electric guitar DOES have a lot to do with the success-or-otherwise of the effects that are ultimately produced, and the earlier Roland synths (GR-30 & GR-33 for example) are actually more 'forgiving' and produce better tracking results than the more recent models (GR-55 & GP-10).
Without a detailed R&D study first, it is certainly possible to spend a reasonable sum of $$$ without getting the desired result..
Much valuable information is to be gleaned from the vguitarsforum and it is basically 'required reading' for anyone contemplating entering the Guitar-Synth arena, BEFORE getting the credit card out.
Disclaimer:
I am not associated with Roland Corporation in any way, but am a member of the vguitarforums (aka 'gumbo') and manufacture after-market components related to guitar-synth installations under the Synth-Linx name.
HTH someone in some way..
Regards,
Peter
From there your exploration will be a lot easier and more complete.
There are other options aside from using the original Roland GK pickup that will allow you to access both 'hard' and 'soft' synths, and ways of "breaking-out" separate string signals for individual processing as well.
At least one company (http://www.cycfi.com/category/electronics/pickups/) manufactures individual string pickups that can possibly be adapted to the multi-string setups of steels, but it should be noted that all current (and past) Roland guitar-synth units are only capable of receiving and processing a maximum of six string signals; they also need a multicore cable with a 13-pin DIN jackplug to connect the output of the guitar to the synth unit, and that is AFTER the signal from the pickup passes through an on-board pre-amp board mounted somewhere on or in the instrument.
For any effects that also use a volume pedal in their creation, that pedal would have to be located between the eventual synth unit and the amplifier, or assign the inbuilt pedal of the synth-unit itself (incorporated in the Roland GR33, GR-55 or GP-10) to the 'volume' parameter.
The placement of a 'synth' pickup (of any sort) within the instrument is an important aspect of the design, particularly with regard to the eventual performance of the system in 'tracking' and 'cross-talk' (between individual string signals).
As has been mentioned, the Roland SY-300 is designed to accept a 'summed' signal through a normal 1/4" jackplug, but loses out in adaptability because it depends upon de-coding that signal to perform its results. Hitting it with more than six or seven strings will possibly make life even harder in that regard.
Playing 'technique' on a six-string electric guitar DOES have a lot to do with the success-or-otherwise of the effects that are ultimately produced, and the earlier Roland synths (GR-30 & GR-33 for example) are actually more 'forgiving' and produce better tracking results than the more recent models (GR-55 & GP-10).
Without a detailed R&D study first, it is certainly possible to spend a reasonable sum of $$$ without getting the desired result..
Much valuable information is to be gleaned from the vguitarsforum and it is basically 'required reading' for anyone contemplating entering the Guitar-Synth arena, BEFORE getting the credit card out.
Disclaimer:
I am not associated with Roland Corporation in any way, but am a member of the vguitarforums (aka 'gumbo') and manufacture after-market components related to guitar-synth installations under the Synth-Linx name.
HTH someone in some way..
Regards,
Peter
If my wife is reading this, I don't have much stuff....really!
- Tal Herbsman
- Posts: 205
- Joined: 11 Sep 2015 7:47 am
- Location: Wisconsin, USA
Here's the always inspiring Jim O'Rourke using the SY-300, around 8:10 he demos a couple of patches on his Zum.
https://www.youtube.com/watch?v=oTDDdnKWxDc
I had no problems with 3 note chord voicing with that pedal. It did start glitching on 4 or 5 simultaneous notes if I remember correctly. Still a neat pedal albeit a tad pricey.
Tal.
https://www.youtube.com/watch?v=oTDDdnKWxDc
I had no problems with 3 note chord voicing with that pedal. It did start glitching on 4 or 5 simultaneous notes if I remember correctly. Still a neat pedal albeit a tad pricey.
Tal.
- Karl Truitt
- Posts: 28
- Joined: 30 Apr 2013 11:51 am
- Location: Michigan, USA
WOW!....a lot of good feedback here. Thanks to all. I have actually been playing around with this concept for quite some time. That being a pick-up designed specifically for the PSG. Those of you who pointed out the spacing on the Roland pickup will not work are absolutely correct. That's why my pickup will consist of the Roland single string pickups mounted on a redesigned PCB. Doug is right in pointing out the Roland pickup works as separate channels. This provides much better tracking than the A/D conversion approaches. So why not design a 10 string PCB? you ask....because the Roland system only accommodates 6 string voicing. Again I'm only working with the Roland GR-20 and GR-30 because as Peter points out, these model just seem to track better than the newer ones. Attached is a pix of my "sanity check" mock-up before I order the PCBs. Basically the pickup will work exactly like the 6 string version only spaced correctly for the PSG. I'm not looking to get rich so if you're still interested, send me a PM. Meanwhile I'll order a dozen PCBs and post a video when It's working.......cheers
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
I've used the original pick like this for years with good success Velcro for the control and two sided tape for the pick up... that way I can remove it in seconds for packing... All you need to do is adjust the sensitivity of each string pick up via the control panel. You can also set the up down buttons on the controller to change instruments, I can go from piano to horns to dobro etc... with the buttons
Gordy Rex
Current guitar '78 Rosewood Emmons PP 8 X 6, La Grande II..8X8...
Current guitar '78 Rosewood Emmons PP 8 X 6, La Grande II..8X8...
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
Erv,
tracks just fine and I cant outplay it.. however in most cases speed isn't an issue anyway.. depending on the instrument being used. Even when I play it using a distorted guitar setting it tracks and bends notes no problem...
tracks just fine and I cant outplay it.. however in most cases speed isn't an issue anyway.. depending on the instrument being used. Even when I play it using a distorted guitar setting it tracks and bends notes no problem...
Gordy Rex
Current guitar '78 Rosewood Emmons PP 8 X 6, La Grande II..8X8...
Current guitar '78 Rosewood Emmons PP 8 X 6, La Grande II..8X8...
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA