Brad Sarno Appreciation Day

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Jim Cooley
Posts: 1754
Joined: 23 Apr 2010 9:12 am
Location: The 'Ville, Texas, USA

Brad Sarno Appreciation Day

Post by Jim Cooley »

I have owned a Sarno Black Box and Freeloader for a while. I've since become interested in Brad's preamps, so I took the opportunity to talk to him at this year's Dallas show. He patiently answered my questions, then subjected himself to my playing so I could hear the Octal V8 set up at his booth. I had a couple more questions after I returned home, so I emailed Brad, just to follow up, hoping he would take the time to answer. He did. Those answers led to more questions. He answered them, too.

I realized that if I went with a preamp separate from a combo amp, I would need a rack system. I posted a question or two on the forum, but also asked Brad, since I would be racking one of his preamps. He hung with me through the purchase of a used preamp from a forum member, and guided me through the setup process, even thought I didn't buy new from him.

Brad guided me from preamps, to amps and speakers, and into the world of rack systems. I'm not sure I'll forgive him for the last part, but I suppose it was my fault and I asked for it.

I can't over-value Brad's assistance. He has been ultimately patient, answering my questions in terms even I can understand. We all hear differently. That's why there are so many products out there that do the same basic things. You might never buy one of Brad's products, but I'll bet that if you do, I doubt you'll ever have to worry about service after the sale. Even more important, though, Brad's just a great guy.
Darrell Birtcher

Post by Darrell Birtcher »

I'll second this! Brad is a real asset to the steel community. Very knowledgeable, very easy to talk to, and he's always willing to help people.
Ivan Posa
Posts: 559
Joined: 25 Nov 2002 1:01 am
Location: Hamilton, New Zealand

Post by Ivan Posa »

Super nice and very clever.
Jack Stanton
Posts: 1894
Joined: 6 May 2007 7:00 am
Location: Somewhere in the swamps of Jersey

Post by Jack Stanton »

Thanks you, Brad for building such wonderful products for the steel guitar community. I'm the proud owner of a Black Box and it is a thing of beauty.
Morton Kellas
Posts: 1019
Joined: 14 Jan 2002 1:01 am
Location: Chazy, NY, USA 1

Post by Morton Kellas »

I totally agree with all the good things said about Brad. Great guy, very knowledgeable individual.
User avatar
Brad Sarno
Posts: 4916
Joined: 18 Dec 2000 1:01 am
Location: St. Louis, MO USA
Contact:

Post by Brad Sarno »

Wow, thanks guys!

B
Len Amaral
Posts: 4818
Joined: 4 Aug 1998 11:00 pm
Location: Rehoboth,MA 02769

Post by Len Amaral »

Brad is the man👍
robert kramer
Posts: 2052
Joined: 27 Nov 1999 1:01 am
Location: Nashville TN

Post by robert kramer »

Steel Guitar Black Box: I never leave home without it.
User avatar
Hook Moore
Posts: 4103
Joined: 4 Aug 1998 11:00 pm
Location: South Charleston,West Virginia

Post by Hook Moore »

Brad is a sharp mind and a good guy to boot..
User avatar
Duane Dunard
Posts: 1988
Joined: 4 Aug 1998 11:00 pm
Location: Troy, MO. U.S.A.

Post by Duane Dunard »

I was impressed with Brad when he first walked into my guitar shop and sold me a new Black Box. Great products and a great man!
Patrick Rusert
Posts: 42
Joined: 11 Jan 2010 12:25 pm
Location: Atlanta, GA

Post by Patrick Rusert »

Here, here! From EQ, to pickups, listening off-axis, preamp tube selection...Brad is helping everyone sound better. Brilliant, yet still humble. And a very tasteful player himself!

https://www.youtube.com/watch?v=xs-R44Hlh5k
Billy Knowles
Posts: 1634
Joined: 15 Nov 1999 1:01 am
Location: Kenansville, N. C. 28349 usa
Contact:

Brad

Post by Billy Knowles »

Brad is a great person who does wonderful work!!!!!!!!!!
Billy Knowles

STEEL GUITAR EAST

Emmons authorized dealer and approved service technician

my web site: http://www.steelguitareast.com
User avatar
Eric Philippsen
Posts: 1966
Joined: 14 Jan 2008 5:38 pm
Location: Central Indiana, USA

Post by Eric Philippsen »

I have several of Brad's products. Their build quality is outstanding and, almost needless to say, their performance and tone are, too.

On several occasions I've either emailed or PM'd Brad, the most recent concerning one of his first products, the Tonic preamp.. He has always been prompt in his replies and patient with me. Really, what more can one want?

Plus, if I recall, he plays an Emmons p/p............... :D
Ford Cole
Posts: 381
Joined: 11 Apr 2004 12:01 am
Location: Texas

Post by Ford Cole »

As Eric says, I too have several of Brad's products and am super satisfied! That black box sure makes my recent "Discovery" sound just like the big boys! fc
User avatar
Doug Jones
Posts: 1561
Joined: 4 Aug 1998 11:00 pm
Location: Oregon & Florida

Post by Doug Jones »

Need more guys like Brad around to share the enthusiasm that goes in everyone's overall sound and Tone-Quest.
User avatar
Ray DeVoe
Posts: 982
Joined: 4 Feb 2005 1:01 am
Location: Hudson, FL

Appreciation day

Post by Ray DeVoe »

I met Brad when he was still in the process of developing his first preamps. I have owned at least one of every model he produced from that time on and I can say that they all have been very dependable and his service is second to none. I especially like the fact that he is always experimenting and improving his products. Brad is always willing to help any way he can and often responds to technical posts on the forum. The forum is a terrific resource and Brad along with others, are major contributors to the advancement of our equipment amplification.

Below are some pictures of setups I put together utilizing Brads preamps from start to current production. They all sound different but terrific in their own way. It's an equipment line up that he can be "proud" of producing.



Tonic preamp mounted in a Furlong 12" powered cabinet. ( This is a great combination )

Image



Rack mounted Classic preamp

Image



Rack mounted V8

Image




Rack mounted Revelation ( with octal tube option )

Image
Zum SD 10 Hybrid, Zum D 10 Hybrid, Emmons SD 10 P.P.
SMS: Revelation & Classic Preamps: Furlong 12" & 15" Splits.
Telonics 500 C: Quilter-T.T.12": Fender T.M. Twin
Dennis Anderson
Posts: 253
Joined: 27 Dec 2012 12:19 pm
Location: Chicago, Illinois

Post by Dennis Anderson »

I'll chime in... just recently picked up a Black Box tube buffer and the Earth Drive pedal. The EArth Drive is just right for my telecaster... full frequency and natural sounding. The Black Box is subtle, but significant. Warmer tone, better clarity, a more forward sound, and lower noise floor on the pedal board. The more I play it, the more I like it. Also hats off to another husband/wife partnership! Great work.
User avatar
Tom Wolverton
Posts: 2874
Joined: 8 May 2008 3:52 pm
Location: Carpinteria, CA

Post by Tom Wolverton »

Image
To write with a broken pencil is pointless.
User avatar
Steve Rosko
Posts: 181
Joined: 11 May 2014 4:31 pm
Location: Georgetown, Texas

Post by Steve Rosko »

Same experience here. Spoke to Brad and eventually purchased a Black Box after A/B'ing a friends with and without (my wife could tell the difference). Then more discussions before I got a used Octal V8. Sent it to Brad for a tube and he updated it. Great guy and huge help to pros and amitures alike.
84 Emmons D10 PP, MSA D10, Hilton, Little Walter PF89, PF-350 cabs, blueSky, BJS
Post Reply