How do I keep those dang Dunlop metal finger picks on!?!?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Mike Wenger
Posts: 19
Joined: 13 Nov 2016 3:28 pm
Location: North Carolina, USA

How do I keep those dang Dunlop metal finger picks on!?!?

Post by Mike Wenger »

The MOST frustrating thing about starting out has been that the metal picks I am using for the index/middle fingers keep flipping off (sorry for the pun). In some desperation, I tried one-inch blue painter's tape around the fingers first. Seems to work like a charm, but then it takes several minutes to get the tape off. :wink:

Does somebody have a better idea? Flesh-colored masking tape might look a bit better, I guess. Having a ball with this guitar, though.
Nathan French
Posts: 46
Joined: 22 Feb 2017 5:05 pm
Location: California, USA

Post by Nathan French »

Maybe you already tried this, but you can bend them to fit your fingers. Then you have to figure out which goes with which finger when you put them on.

I struggled to adapt to finger picks when I picked up bottleneck slide and I haven't gotten any closer to being comfortable with them sadly.
User avatar
Pat Moore
Posts: 1009
Joined: 5 Dec 2010 9:21 am
Location: Virginia USA

Picks

Post by Pat Moore »

Hey Mike,
Stick your fingertip just in your mouth and get it wet. Push the pick on your finger. It'll stay there all night. Honest! Works for me and many others. Quick and easy! Works for the plastic thumb pick too.
Give it a try!
For those with an issue about sanitation, I always wash my hands before I play, whether guitar or steel, just to keep the necks and strings clean. Makes this method work just fine with no issues, compared to those who don't wash up and have poor hygiene!
Just trying to let you know what does work! As with most everything with guitars, nothing is written in stone, and whatever works for you is best for you.

Pat :D :roll:
Last edited by Pat Moore on 16 Mar 2017 5:48 pm, edited 3 times in total.
Edward Rhea
Posts: 1181
Joined: 14 Mar 2013 6:36 pm
Location: Medford Oklahoma, USA

Post by Edward Rhea »

My good friend Jack Ritter carries a travel size aerosol can of hairspray, in his pac-a-seat. Gets tacky and makes'em stick...lick & stick works well too, although some have questioned its sanitary? Just tell them "I don't like buggers on my pics!"
“TONESNOB”
Ray Minich
Posts: 6429
Joined: 22 Jul 2003 12:01 am
Location: Bradford, Pa. Frozen Tundra

Post by Ray Minich »

If you wear them enough you get permanent dents in your finger tip each side of the finger nail. Then they stay on more easily, Takes about 10 years....
Lawyers are done: Emmons SD-10, 3 Dekleys including a D10, NV400, and lots of effects units to cover my clams...
User avatar
Tom Quinn
Posts: 2753
Joined: 4 Aug 1998 11:00 pm

Post by Tom Quinn »

Jeff Newman hated Dunlops. I'd recommend "'41s" from Bill at:

972/ 475-0633 • Fax 972/ 412-5862
Showcase • P.O. Box 1660 • Rowlett, TX 75030
bill@BillStokesShowcase.com

He's a great guy and makes terrific finger picks among other things...
I need an Emmons!
User avatar
Charlie Hansen
Posts: 742
Joined: 2 Feb 2016 10:19 pm
Location: Halifax, NS Canada and Various Southern Towns.

Post by Charlie Hansen »

What Pat said. I do that and they never come off. As a matter of fact when you want to take them off they're on really tight.
User avatar
Pat Moore
Posts: 1009
Joined: 5 Dec 2010 9:21 am
Location: Virginia USA

Post by Pat Moore »

👍Exactly right Charlie! You do have to pull them off. Works with any style/brand of picks once you get them adjusted to your fingers!
Natural glue!
Thx, Pat🤔
User avatar
John Roche
Posts: 2212
Joined: 2 Feb 2006 1:01 am
Location: England

Post by John Roche »

Perfect Touch picks solved the problem for me, never had a pick come off.
User avatar
Mike Perlowin
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
Contact:

Post by Mike Perlowin »

Another thing that works well is shrink wrap, which you cab find at your local hardware store.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
Billy Murdoch
Posts: 2161
Joined: 14 Feb 2004 1:01 am
Location: Glasgow, Scotland, U.K.

Post by Billy Murdoch »

Perfect touch for Me too.The most comfortable picks I have used.
Larry Baker
Posts: 3296
Joined: 2 May 2008 3:15 pm
Location: Columbia, Mo. U.S.A.

Post by Larry Baker »

Pro Pics is the best I have found.
Mullen G2 SD10 3 & 5 The Eagle
NV112 amp===Earnie Ball V.P.
Randle Cole
Posts: 11
Joined: 28 Feb 2017 8:44 am
Location: California, USA

Post by Randle Cole »

try fiddle rosin. easy to carry and works well.
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

I am a finger lick kind of guy. I've tried several of the sticky spays/ointments and even fiddle rosin. With them I would also touch somewhere on my guitar, and the sticky stuff would get on the guitar, and even the amp and effects. Ihave a new set of Nationals that I did the shrink wrap on, but they feel bulky and clunky. I keep them as emergency pick. I use Jeff Newman picks, but I assume they are no longer available.

It was mentioned earlier about bending your picks and having to figure out what pick goes on what finger. A Sharpie pen solves that problem. Use it to "paint" the part of the band that goes over the outside of the finger. Been doing this for years.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
Jimmy Gibson
Posts: 880
Joined: 13 Nov 2002 1:01 am
Location: Cornwall, England

Perfect touch pics

Post by Jimmy Gibson »

Any chance of a picture of a Perfect Touch pick please.the picks I use are pressed from a single piece of steel,there are no holes in them like most of the picks I have used,and I really like them but don,t seem to be able to find any of them anywhere on the net,any help in finding some would be great and appreciated.


Cheers.
Last edited by Jimmy Gibson on 17 Mar 2017 8:30 am, edited 2 times in total.
Bill Miller
Posts: 1438
Joined: 19 Mar 2003 1:01 am
Location: Gaspe, Quebec, Canada
Contact:

Post by Bill Miller »

I've been fighting with my fingerpicks for as long as I have been playing and still haven't found a perfect solution to keeping them in place. My latest variation is a combo approach. I'm using one latex ( or whatever ) coated pick on my index finger...you know...the red or black coated ones. And an ordinary Dunlop on my middle finger, applied with a bit of slobber. Seems to be working out for now. I don't like two coated picks because the thickness of the coating makes them bulky enough to drag against each other. One coated and one bare is better. I have more trouble keeping a pick on my index finger so that's where the coated one works best.
Jack Ritter
Posts: 1104
Joined: 5 May 2005 12:01 am
Location: Enid, Oklahoma, USA

Post by Jack Ritter »

FWIW-- I always get up and away from my steel so no spray never gets on it, or any of my gear. I spray just the last joints on my pickin fingers, let them flash off and just before they dry I put on my picks where I use them. Wipe the picks and finger tips in a downward push 2 or 2 times on my right pant leg and they are ready to go. No problem with any hair spray on my strings or equipment. I use the JF picks.
Zum D10 8x5,rev pre-amp, TC M300, Split 12, n-112, IZZY, Hilton vp, Geo L, BJS Hughey, Live Steel
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

To solve a problem it helps to analyse the cause. If like many successful pickers you bend the tips of the picks round level with your fingernail, and play with your fingers bent back on themselves, then the act of striking the string will tend to push the pick onto the finger. If you use them straight out of the box and/or have a more upright hand position, then you will be fighting the tendency for them to flip off.

The other thing that helps is a good fit. Round nose pliers and patience will do it. Play an exercise - tweak - play - tweak - it helps if you have an obsessive personality. It took me a good week to get my last set bedded in. A snug fit coupled with the tendency of your perspiration to etch the metal slightly does it for me.

I have used Dunlops, Newmans and Nationals and have found no difference in this regard.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Dustin Rigsby
Posts: 1460
Joined: 20 Mar 2004 1:01 am
Location: Parts Unknown, Ohio

Post by Dustin Rigsby »

I prefer the JF picks from Jeffran. Superior to dunlops in every way. Still available from www.jeffran.com
D.S. Rigsby
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Dustin Rigsby wrote:I prefer the JF picks from Jeffran. Superior to dunlops in every way. Still available from www.jeffran.com
Cool. Thanks.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
User avatar
Tony Glassman
Posts: 4470
Joined: 18 Jan 2005 1:01 am
Location: The Great Northwest

Post by Tony Glassman »

Randle's mention of fiddle resin is a good idea. I used to keep a block in my seat but got out of the habit recently. It is helpful and not messy.

Also, I usually rough up the inner surface of the picks with sandpaper or a scribe to add friction between the skin and metal.
Tom Gorr
Posts: 2311
Joined: 12 Sep 2000 12:01 am
Location: Three Hills, Alberta

Post by Tom Gorr »

National NP2s for fingers... propick long blade with shrink wrap for thumb
User avatar
Tony Glassman
Posts: 4470
Joined: 18 Jan 2005 1:01 am
Location: The Great Northwest

Post by Tony Glassman »

Randle's mention of fiddle resin is a good idea. I used to keep a block in my seat but got out of the habit recently. It is helpful and not messy.

Also, I usually rough up the inner surface of the picks with sandpaper or a scribe to add friction between the skin and metal.
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

I use clear nail polish for two reasons
1) it helps keep them on by making them slightly tacky, and;
2) it protects my fingers from the (admittedly minor) ravagettes (minor ravages) of the picks.
Most fingerpicks are an alloy containing copper and zinc (I think there's a third metal but I can't recall it).
Copper turns your fingers green, and the zinc dries the skin, making the fingers more prone to dry and split.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
John Roche
Posts: 2212
Joined: 2 Feb 2006 1:01 am
Location: England

Post by John Roche »

Post Reply