Keeping picks on fingers

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

User avatar
Jerry Overstreet
Posts: 12622
Joined: 11 Jul 2000 12:01 am
Location: Louisville Ky

Post by Jerry Overstreet »

If you're using stick 'um, put it on the meaty part of your fingertips where they meet the blade, opposite the fingernail.
User avatar
Mike Perlowin
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
Contact:

Post by Mike Perlowin »

John Limbach wrote:Had this problem. Several months ago in a previous thread on this subject someone recommended Saddle picks. Got some. End of problem. They stay put and are comfortable to boot.
Guys, when recommending something like this, please include the web address.
http://www.saddlethumbpicks.com/
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
Lyle Clary
Posts: 853
Joined: 27 Dec 2004 1:01 am
Location: Decatur, Illinois, KC9VCB

Post by Lyle Clary »

I might be repeating my self but a steeler friend Kenny Radas from Edwardsville Illinois suggests a 50/50 mixture of STA Flo liquid starch water mix. Take a small pill bottle about one inch in diameter and steel a foam cleaning pad from your wife and cut a small piece fold it and place in bottle. Pour a small amount in the bottle. Stick your thumb or finger between the fold pull it out then place pick on finger. If your picks are well adjusted I guarantee that with in minutes they will be difficult to pull off. Once amonth or so clean the sponge and bottle and put fresh liquid in as it tends to get sour. Your nose will be your guide.
2006 Zum D10 8x8,1969 ZB Custom D10,
10 3x4 Peavey Nashville 112 Peavey LTD 400 2014 Zum Encore Wood Grain 4x5 Stage One pot pedal
John Limbach
Posts: 535
Joined: 13 Jul 2009 11:41 am
Location: Billings, Montana, USA

Post by John Limbach »

Mike Perlowin wrote:
John Limbach wrote:Had this problem. Several months ago in a previous thread on this subject someone recommended Saddle picks. Got some. End of problem. They stay put and are comfortable to boot.
Guys, when recommending something like this, please include the web address.
http://www.saddlethumbpicks.com/
Good point. Would have if I'd remembered it. By the way, I absolutely hated the thumbpick, but fell in love with the fingerpicks. Go figure.
Finis Spier
Posts: 1293
Joined: 12 May 2005 12:01 am
Location: Texas, USA

picks

Post by Finis Spier »

try putting shrinkwrap on your picks works great hair spray also works i keep a small bottle in my packaseat
User avatar
Mike Perlowin
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
Contact:

Re: picks

Post by Mike Perlowin »

Finis Spier wrote:try putting shrinkwrap on your picks works great
I have some of the late Andy Hinton's powder coated picks, and some uncoated ones. I put shrink wrap on the uncoated ones, and must agree. It works great.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
User avatar
Michael Johnstone
Posts: 3841
Joined: 29 Oct 1998 1:01 am
Location: Sylmar,Ca. USA

Post by Michael Johnstone »

I usually just go up to the bar at the beginning of each night and get a slice of lime or lemon and take it up to the stage and keep it on a napkin on my amp. Then I rub it all over my fingertips each set before putting on the picks. Dipping your fingertips in beer works too or better yet a shot glass of peach brandy which is stickier(and tastier). Both remedies are always close at hand...
My experience with Gorilla Snot was that it's sticky at first and then when my fingers warm up it seems to turn slippery. Never checked out heat shrink tubing but it seems worth a try.
Another thing I did for 40 years was keep my nails a little longer on the fingers that I use fingerpicks on so that the long nail tucks inside the curve of the pick and closes off the gap between the tip of the pick and a shorter nail which would tend to snag on the next higher string than the one I was attempting to pick. A few years back when I started playing Chapman Stick the long nails had to go so I had to get used to that and re-bend my picks accordingly. I'm good to go now as long as the picks stay put.
User avatar
Bill Rowlett
Posts: 848
Joined: 4 Aug 1998 11:00 pm
Location: Russellville, AR, USA

Post by Bill Rowlett »

I keep a little bottle of acetone or naphtha and a cloth in my seat. It's good for getting the chicken grease off after a break if you can't wash your hands, and the picks stick good to the dry skin.
Will Cowell
Posts: 388
Joined: 23 Jan 2008 1:02 pm
Location: Cambridgeshire, UK

Post by Will Cowell »

I find the harder you play with Alaska Piks the firmer they stay on. They feel more intuitive in terms of "where my fingers end" than conventional picks. It is early days yet but I think I may stay with them for a long time.

Alaska Pik: http://www.alaskapik.com/
Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

If nothing else works, there's always super glue. :whoa:
David Weisenthal
Posts: 445
Joined: 1 Jul 2015 8:04 am
Location: Arizona, USA

Post by David Weisenthal »

Another vote for licking the fingers. The picks just dont seem to loosen afterwards. My plastic thumb picks dont need anything. Georg, those finger picks hardly extend at all. Do you get better control that way?
Derby SD10, Peavey Session 400
User avatar
Fred Glave
Posts: 1414
Joined: 22 Dec 2003 1:01 am
Location: McHenry, Illinois, USA

Post by Fred Glave »

A quick lick will make the pick stick. I've been using the same picks for about 5 years and they always stay put.
Zum Encore, Zum Stage One, Fender 2000, Harlan Bros., Multi-Kord,
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

Fred,
It works for me! :D
User avatar
Michael Holland
Posts: 1297
Joined: 4 Oct 2002 12:01 am
Location: Nashville, Tennessee, USA

Post by Michael Holland »

Eyeglass pads. Snug and comfy and you can get 'em at any Walgreen's. When they wear peel 'em off and put on a new set. And keep ya fingers outcha mouth. I know where they've been.



Image
"I am certain of nothing", Anthony Bourdain
User avatar
Lyle Dent
Posts: 227
Joined: 3 Aug 2010 7:05 am
Location: Little Rock ,Arkansas

Keeping picks on

Post by Lyle Dent »

Frog or Gorilla snot work great!
Image
Rittenberry Prestige SD-12,Mullen G2 SD-12 ,Mullen PRP S-12 BMI S-12 V8 octal, BJS Bars, LiveSteelStrings,Steelers Choice Seat.
David Mitchell
Posts: 1033
Joined: 18 Apr 2015 4:35 pm
Location: Tyler, Texas

Post by David Mitchell »

I know this is an older thread but this is an on going problem with many. I never had any trouble with picks falling off. I always use thin ones .018 gauge and give them a little extra squeeze after I put them on and the thin gauge forms to my fingers well. I cannot do this with heavy gauges therefore I don't use a heavy gauge finger pick. They dig into my fingers and have a gritty metallic sound. I like the .018 Dunlops. I have some Andy Hinton half coated .018 that I love. Reduces even the slightest irritation. What I always have trouble with is a slippery bar before the show starts. It feels like a slippery ice cube I can't hold on to so what I do before I start is breath some heavy breaths on my bar and the heated moisture gives it some traction. After the first song I don't have that problem anymore. Guess my bars need to be heated. Anyone making a bar you can control the temperature on?
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

David,
I agree with you on the lighter gauge Dunlop picks.
Also, have you ever tried a zirconia bar?
I find them to be more used friendly than a steel bar.
Up here on the tundra, they don't feel as cold on the hands and are easier to hold onto. :D
Erv
David Mitchell
Posts: 1033
Joined: 18 Apr 2015 4:35 pm
Location: Tyler, Texas

Post by David Mitchell »

Thanks Erv! I'll get me one of those and check it out.
Jim Bob Sedgwick
Posts: 2155
Joined: 23 Jan 1999 1:01 am
Location: Clinton, Missouri USA

Post by Jim Bob Sedgwick »

Carl Kilmer wrote:I've always used (heat shrink tubing) on National picks and
on Dunlop brass picks finger licking always does the job. :D
The most comfortable thumb picks for me are Dunlop "Ultex".
Another plus... heat shrink will stop the pick from tearing your cuticles. As you well know this is a painful problem!
David Mitchell
Posts: 1033
Joined: 18 Apr 2015 4:35 pm
Location: Tyler, Texas

Post by David Mitchell »

Thanks! I'm gonna try the heat shrink too. I got some of that in my electronic repair box. Never thought about that. I guess you need the bigger sizes to go over the pick.
User avatar
Bobby Nelson
Posts: 803
Joined: 21 Apr 2017 6:46 pm
Location: North Carolina, USA

Post by Bobby Nelson »

I figured this out the first day I brought my buddy's 8-string Fender home back in May. It took me a day or so but then I commenced to sticking my fingertips in my mouth and it has bee all good since. I did order some of the Tool Magic this morning because I still have a little problem with the thumb pic rolling around. I like the medium tortoise shell (plastic) Nationals the best as, they are the best fit. But, the guy above was right: They do wear out and ya have to chuck em.
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Pete,I just ordered some"Blue Stuff"from Amazon!
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
Ben Lawson
Posts: 2723
Joined: 22 Jul 1999 12:01 am
Location: Brooksville Florida

Post by Ben Lawson »

Keeping picks on is not a consistent problem. I have times when they don't stay on and other times that they stay on and feel just right. My wife gets something called "Sort Kwik". Its sold in sewing or quilting shops. It works pretty well. The only problem I have is that I try to keep the picks on for the whole gig. It causes and problem when nature calls!
Post Reply