Keeping picks on fingers

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Dave Greene
Posts: 14
Joined: 27 Sep 2016 6:44 am
Location: Bellevue, Washington, USA

Keeping picks on fingers

Post by Dave Greene »

I have nationals, and I'm having trouble keeping the picks attached to my fingers. Metals on fingers, plastic for thumb.
Any suggestions?
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

There are many ways of treating picks with various substances, but I favour a good fit. Round-nose pliers and patience. A lot depends on your hand shape and angle of attack. If your fingers bend back towards you, then less of a problem. A more upright position is more likely to dislodge them. My Nationals stick better now the newness has worn off.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Marty Broussard
Posts: 2378
Joined: 18 Oct 2002 12:01 am
Location: Broussard, Louisiana, USA

Post by Marty Broussard »

Dave,
The one thing that has worked consistently for me is to lick my fingers. Of course, wash your hands first. But this suggestion came from a post I read about Buddy doing it, and if you watch some videos and are lucky enough to catch him putting his finger picks on you'll see him do it. One vid in particular is the Laney Hicks vid of Nameless Shuffle. Watch close as he gets ready...it's only a second or two in the video when you can see him do it.

I tried rosin, gummy stuff, double stick tape, and other things, but shaping the picks to my fingers and licking them has really worked. I have to wait a few minutes for my fingers to dry but then the picks are "locked" in place and I hardly ever have to adjust them afterwards. If I can't wash my hands I have a small bottle of hand sanitizer in my bench that I use.

Hope that helps.
"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin
User avatar
Earnest Bovine
Posts: 8318
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA USA

Post by Earnest Bovine »

I use Gorilla Snot.
User avatar
Jeff Harbour
Posts: 632
Joined: 27 Mar 2007 8:04 am
Location: Western Ohio, USA

Post by Jeff Harbour »

Try this: http://www.sticky-picks.com/

http://bb.steelguitarforum.com/viewtopic.php?t=228721

Made by top-notch steel player Wayne Hobbs, one of our local heroes.
Paul Sutherland
Posts: 2732
Joined: 8 Mar 2007 3:45 pm
Location: Placerville, California

Post by Paul Sutherland »

Clean hands and picks. Wash them both, often. Wash the bar too.

When a plastic thumb pick starts to feel loose, get a new one. I replace thumb picks about once a week. They're cheap.

Use heat shrink on metal finger picks.
It don't mean a thing if it ain't got that swing.
User avatar
Randy Owens
Posts: 110
Joined: 23 Sep 2016 12:44 pm
Location: West Central Indiana, USA

Post by Randy Owens »

This is interesting to me. I usually practice for an hour in the morning and a couple of hours at night. I notice that my picks do not fit in the morning. At night, they are loose to the point where they feel like they're going to come off. I'm starting to think I need two sets.
2003 Mullen Royal Precision, Walker Stereo Steel, Ampeg G-15, Telonics FP-100
Ed Boyd
Posts: 265
Joined: 21 Feb 2016 8:11 am
Location: Illinois, USA

Post by Ed Boyd »

My fingerpicks (National NP2s) work fine. I use needle nose pliers and shape the NP2s to fit real tight. They are not comfortable but they do not go anywhere.

But I have not found a plastic thumbpick that works well at all. I think Dunlop got its name because their thumbpick has Done Lopped over.

For Banjo I use Dunlop nickel silver thumbpicks but on steel I would like to use plastic. I have some Fred Kelly thumbpicks that are tight and don't do so bad. National thumbpicks feel better but they move on me more.

Image

Part of it might be since I started as a banjo player first I really bend the tips of my finger picks around my finger tips and they don't bite as straight into the strings like the thumb pick does.
Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

Lick your fingers. Works like a charm.
Dave Greene
Posts: 14
Joined: 27 Sep 2016 6:44 am
Location: Bellevue, Washington, USA

Feedback on loose finger picks !!

Post by Dave Greene »

Thanks everyone for the helpful suggestions. I'll try them all. Guess that'll make me a finger licker/picker.
User avatar
Larry Lenhart
Posts: 2923
Joined: 12 May 2000 12:01 am
Location: Ponca City, Oklahoma

Post by Larry Lenhart »

I agree with licking your fingers...works great for me. Also Kelly thumb picks is all I will ever use...they work great for me for steel, guitar and banjo.
Zum Encore, Pedalmaster D10, Remington D8 non pedal, Hallmark Mosrite clone, Gretsch 6120 DSW, 1976 Ibanez, Eastman archtop, Taylor Dreadnaught, Telonics pedal, Squire Tele, Squire Strat, Fender Tonemaster, Gold Tone 5 string banjo, Little Wonder tenor banjo, Boss Kamatra 100, 3 Roland cubes 30s and 80, Carvin combo bass amp
User avatar
Carl Kilmer
Posts: 2691
Joined: 7 Aug 2008 1:23 pm
Location: East Central, Illinois

Post by Carl Kilmer »

I've always used (heat shrink tubing) on National picks and
on Dunlop brass picks finger licking always does the job. :D
The most comfortable thumb picks for me are Dunlop "Ultex".
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
Bob Moore
Posts: 441
Joined: 1 Dec 2006 1:01 am
Location: N. Rose, New York

Post by Bob Moore »

Go to dollar store and get stick glue. I got a 3 pack. Just dab on fingers and they will stay. Works good for picking 6 string also. Bob M
Bob Moore
Posts: 441
Joined: 1 Dec 2006 1:01 am
Location: N. Rose, New York

Post by Bob Moore »

Go to dollar store and get stick glue. I got a 3 pack. Just dab on fingers and they will stay. Works good for picking 6 string also. Bob M
User avatar
Paddy Long
Posts: 5462
Joined: 19 Aug 2003 12:01 am
Location: Christchurch, New Zealand

Post by Paddy Long »

I am another one who has always just licked my fingers - hygiene being an important factor of course hehe
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

The metals of the picks bothers me: the copper turns my fingers green and the zinc dries the skin. So I paint the insides of my picks with clear nail polish. This also makes them slightly grippy.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
Mike Perlowin
Posts: 15171
Joined: 4 Aug 1998 11:00 pm
Location: Los Angeles CA
Contact:

Post by Mike Perlowin »

Carl Kilmer wrote:I've always used heat shrink tubing
Me too. I also have some of the late Andy Hinton's picks with the part that goes on your fingers is powder coated, but the blades are not.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
User avatar
Howard Steinberg
Posts: 604
Joined: 2 Mar 2012 8:46 am
Location: St. Petersburg, Florida , USA

Post by Howard Steinberg »

I've been using a product called tool magic that you can get at Joann fabrics for around $5. It's typically used to coat tool parts such as plier jaws. If you dip the band of the pick in it it will give you a nice coating that makes the picks comfortable and lasts a long time.
Justice Pro Lite (4-5), Justice D-10 (8-5)x2 , Quilter Steelaire, Hilton Pedal, BJ's bar.
Dave Greene
Posts: 14
Joined: 27 Sep 2016 6:44 am
Location: Bellevue, Washington, USA

Keeping picks on fingers

Post by Dave Greene »

Thanks again to all who responded with great suggestions (mostly licking your fingers after washing them) :)
User avatar
Rick Campbell
Posts: 4283
Joined: 8 May 2006 12:01 am
Location: Sneedville, TN, USA

Post by Rick Campbell »

Marty Broussard wrote:Dave,
The one thing that has worked consistently for me is to lick my fingers. Of course, wash your hands first. But this suggestion came from a post I read about Buddy doing it, and if you watch some videos and are lucky enough to catch him putting his finger picks on you'll see him do it. One vid in particular is the Laney Hicks vid of Nameless Shuffle. Watch close as he gets ready...it's only a second or two in the video when you can see him do it.

I tried rosin, gummy stuff, double stick tape, and other things, but shaping the picks to my fingers and licking them has really worked. I have to wait a few minutes for my fingers to dry but then the picks are "locked" in place and I hardly ever have to adjust them afterwards. If I can't wash my hands I have a small bottle of hand sanitizer in my bench that I use.

Hope that helps.
Marty,

When I was a kid, we were poor and my dad would take us to Kentucky Fried Chicken and let us lick other people's fingers.

RC
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

I use a product called LokTite Fun-Tak.
Just a pinch between my fingernail and fingerpick.
Image
I call it... Blue Stuff
Dave Greene
Posts: 14
Joined: 27 Sep 2016 6:44 am
Location: Bellevue, Washington, USA

Keeping picks on fingers

Post by Dave Greene »

Pete:
Thanks for the advice. See photo for the locations as I understand you.
Image
User avatar
Lee Baucum
Posts: 10326
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Post by Lee Baucum »

Here is a very old discussion ---> Click Here

Here is one that is more recent ---> Click Here
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

Yes, I put a little on the fingernail just in front of where it meets the skin, then slide the pick on over it, kind of putting the pick on over the blue stuff first, then sliding the rest of the fingertip into the pick. You can experiment a bit to get it it right.
It usually gets mostly worked in to the pick, and mostly stays on the pick.
Very comfortable.
I usually only use it on the metal fingerpicks, but when I play Autoharp (alot more strummy) I use it on the thumb, too.
John Limbach
Posts: 535
Joined: 13 Jul 2009 11:41 am
Location: Billings, Montana, USA

Post by John Limbach »

Had this problem. Several months ago in a previous thread on this subject someone recommended Saddle picks. Got some. End of problem. They stay put and are comfortable to boot.
Post Reply