Good steel reverb recommendations anyone?

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

User avatar
Claire Winter
Posts: 30
Joined: 7 Mar 2012 9:32 pm
Location: Washington, USA

Good steel reverb recommendations anyone?

Post by Claire Winter »

A good pedal steel sound needs an exceptionally good reverb on it when called for, especially in the upper registers. I've tried a couple of Alesis digital versions and am underwhelmed. Anyone have recommendations on a good reverb, preferably with a pedal switch on it? I'm pretty new at this, so any advice is appreciated. Thanks!!
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

The Boss RV-5 is good and it has a paddle switch.
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

The Holy Grail sounds great and has one of the best sounding buffers I've used built in.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
John Swain
Posts: 1576
Joined: 12 Feb 2000 1:01 am
Location: Newberry,SC

Post by John Swain »

Doug Jernigan has been using the Digitech Hardwire RV-7, the last few years.I use amp reverb, Peavey Nashville 400 with Fox Intense Mod, which really helps the Peavey reverb.
User avatar
Ray Montee
Posts: 9506
Joined: 7 Jul 1999 12:01 am
Location: Portland, Oregon (deceased)
Contact:

Amp reverb used and appreciated.

Post by Ray Montee »

I've always used the PEAVY in amp reverb and found it to be an excellent unit.

Likewise, the Holy Grail is a solid unit.
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

If you like the sound of a spring reverb, there's always this one in a stomp box:

Image
Drew Pierce
Posts: 380
Joined: 15 May 2013 9:46 am
Location: Arkansas, USA

Post by Drew Pierce »

The Boss RV-3 is a good starting point. Lloyd "Mr. Nashville Sound" Green used one for years (may still?), so that tells you a lot about them right there. It has a great reverb and the added bonus of a delay that can be mixed and matched with the reverb for plenty of great sound options. They're not in production any more but can be found on eBay all the time. Should be able to pick one up for less than $100.
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
User avatar
John Booth
Posts: 2036
Joined: 25 Oct 2014 9:17 am
Location: Columbus Ohio, USA

Post by John Booth »

I second the recommendation for the Holy Grail.
Best spring AND hall reverbs I've ever used.
Jb
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
John Macy
Posts: 4264
Joined: 4 Aug 1998 11:00 pm
Location: Rockport TX/Denver CO
Contact:

Post by John Macy »

The Benado reverb, available as a stand alone AddVerb, or in the Virgo or Steel Dream, just does it for me big time! Sage builds fantastic stuff!
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Someone gave me a Hall Of Fame unit, and I can't get it dialed in to anything I like. The reverb in my NV400 died, so I'm having to use outboard reverb.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
User avatar
Chuck Blake
Posts: 918
Joined: 8 Aug 2011 8:49 am
Location: West Virginia, USA

Post by Chuck Blake »

Holy Grail Nano pedal.......small, compact, great reverb unit. :D
2010 Rains 3x5 SD10, 2006 Rains 3x5 SD10 Powered by Quilter Tone Block 202 and 15' and 12' Custom Speaker cabs
Jack Stanton
Posts: 1894
Joined: 6 May 2007 7:00 am
Location: Somewhere in the swamps of Jersey

Post by Jack Stanton »

As much as I have tried to get away from rack equipment, I continually return to the Lexicon MPX1 Hall setting. Transparent, yet ethereal.
User avatar
Mark Wayne
Posts: 689
Joined: 27 Nov 2006 1:01 am
Location: Wisconsin, USA
Contact:

Post by Mark Wayne »

After nearly 30 years of digital reverbs (Boss's, Lexicon MPX 500, Verbzilla, Alesis Quadraverbs), I switched to the "Room-mate" tube reverb pedal, by T-Rex, about 3 years ago. It's kind of picky, but lush and thick. Kind of reminds me of the higher caliber studio Lexicons.

The Room-mate has all your mix, decay, level and gain choices....but it also has a hi-cut knob to reduce the highs on the tail of the reverb, making a pretty smooth decay. A nice "Spring" setting, also.

I think I just talked myself into buying another one


Image
Mark Wayne Krutke
****markwayne.biz****
User avatar
Tony Glassman
Posts: 4470
Joined: 18 Jan 2005 1:01 am
Location: The Great Northwest

Post by Tony Glassman »

People were pretty high on the Neunaber "Wet Reverb" pedal for a while. i've ever tried or heard one but have always been tempted. Any users?
User avatar
Garry Vanderlinde
Posts: 1500
Joined: 14 Nov 2002 1:01 am
Location: CA

Post by Garry Vanderlinde »

I've been enjoying the Reverb settings on the Steel-Air amp by Quilter. Being able to set the Tone and the ample Dwell settings is something I've never been able to do before. Add a Holy Grail and you're in Vandura territory.
8)
User avatar
Claire Winter
Posts: 30
Joined: 7 Mar 2012 9:32 pm
Location: Washington, USA

Post by Claire Winter »

Wow this forum is SO great, thanks for the valuable input, guys! There aren't many steel players in Washington state so this forum is a lifesaver. Thanks a heap: I'll chase down all your suggestions. :D
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

Or you could just set your guitar up in a big restroom.
That's how they used to do it before electronics. :D
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Erv Niehaus wrote:Or you could just set your guitar up in a big restroom.
That's how they used to do it before electronics. :D
I haul around a big bathroom with a shower, and play in the shower. :lol:
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

With the water on? :whoa:
User avatar
Howard Parker
Posts: 2610
Joined: 4 Aug 1998 11:00 pm
Location: Clarksburg,MD USA
Contact:

Post by Howard Parker »

Tony Glassman wrote:People were pretty high on the Neunaber "Wet Reverb" pedal for a while. i've ever tried or heard one but have always been tempted. Any users?
A dedicated fan/user here. Mighty lush. I love it!

h
User avatar
George Seymour
Posts: 870
Joined: 14 Nov 1999 1:01 am
Location: Notown, Vermont, USA

Post by George Seymour »

Tony Glassman wrote:People were pretty high on the Neunaber "Wet Reverb" pedal for a while. i've ever tried or heard one but have always been tempted. Any users?
Neuaber is excellent, I have the stereo wet reverb and find it superb. It can also be programmed with download from Neuaber to perform delay and reverb, I've not tried this yet, should though...
Strymon Blue Sky is a great choice for stand alone reverb more options and controls, and $300, I use Strymon Brigadier Analog delay in conjunction with the wet reverb, very, very nice.
Simply put the electronics today are all good, I used the Peavey Profex for years, but in today's technology it was quite noisy.... To the original poster...you can try any of the suggestions mentioned and really threre are huge selections of electronics and the choices can be staggering, it will all come down to what you like and want to hear to please you.
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

I second Jack Stanton's choice.
User avatar
Dale Rottacker
Posts: 3513
Joined: 3 Aug 2010 6:49 pm
Location: Walla Walla Washington, USA
Contact:

Post by Dale Rottacker »

I used the built in Peavey Reverbs for my first 100 years... in the 2nd 100 years I’ve used both the Profex ll and now have settled on the Lexicon MPX1 with the Buddy Castleberry presets added.... I’ve been using the John Hughey Parallel setting... 222 on mine, and can’t seem to get away from it, I love it... it has both Reverb and Delay in it.... Very Tasty
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Erv Niehaus wrote:With the water on? :whoa:
..Of course
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
User avatar
Roger Dillingham
Posts: 303
Joined: 2 Jan 2009 3:24 pm
Location: Kentucky, USA

Good reverb for Steel

Post by Roger Dillingham »

Hello Claire! I have always thought of myself as somewhat of a "reverb connoisseur" as I have been hard to satisfy when it comes to "that sound". I have a Neunaber Stereo Wet Reverb which comes awfully close to the sound I have been looking for all my playing career. It's really great! In a rack mount I have a Lexicon MPX-1 with the John Hughey settings and there are some fine reverb sounds in that unit. I have just recently obtained a T C Electronics rack mount effects unit, a M-One XL, which is supposedly well known for its reverbs. I have yet to try it out, but will gladly let you know if it's a winner. I purchased a Digitech Hardwire RV-7 reverb pedal several years ago, which also contains some good Lexicon reverbs, but it doesn't quite come up to the Wet Reverb pedal. For dollar spent, I don't believe you can do any better than the Neunaber Wet Reverb, Mono or Stereo version. JMHO
Roger :)
Post Reply