Really having pedal problems. Should pedal 1 & 2 travel the same distance? Should they be the same height when they not engaged?
Thanks Don Hall
Pedal Adjustment
Moderator: Shoshanah Marohn
-
- Posts: 2992
- Joined: 26 May 2005 12:01 am
- Location: Kinston, North Carolina, USA
- Ronnie Boettcher
- Posts: 749
- Joined: 23 Nov 2007 2:33 pm
- Location: Brunswick Ohio, USA
I have my A pedal a little higher than the B pedal. This on Emmons set up. My reason for it is: when I use the A pedal, and the LKL lever, at the same time, I bend my ankle so I do not hit the B pedal. If both pedals are the same height, in the up position, and I rock the A pedal, my foot slightly hits the B pedal, and distorts the sound coming out of the B pedal strings. And yes, I have both of them finish on the same level, when both are pressed. My ankle does not bend as much as I got older. Also it works like Lane said in the previous note. The A pedal travels a wee bit farther. Ronnie
Sho-Bud LDG, Martin D28, Ome trilogy 5 string banjo, Ibanez 4-string bass, dobro, fiddle, and a tubal cain. Life Member of AFM local 142
-
- Posts: 549
- Joined: 21 Jun 2004 12:01 am
- Location: Moberly, Missouri, USA
foot pedals
i have my foot pedals set about 1.75 inches off the ground. they travel about 1 inch when applied. so when they hit bottom they are about 3/4 inch off the floor. for me if they are too high its hard to play and not use any pedals. i would say its player prefference on how high the pedals are set. i like mine lower it just seems to work better with me. thanks sid
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
Re: Pedal Adjustment
IMHO, no and no. There shouldn't be a huge disparity, but then again, they should not be the same, either. I always advise players with supposed "problems" to have another player try the guitar before they go making changes. In my 50+ years of playing, I have seen countless guitars made less playable by owners who were "just trying to improve things".Donald Hall wrote:Really having pedal problems. Should pedal 1 & 2 travel the same distance? Should they be the same height when they not engaged?
Thanks Don Hall