ZB Custom F lever part

Michael Hutchison · Post by **Michael Hutchison** » 8 Aug 2016 8:32 am

I have a ZB custom that doesn't have the special part used for the half step raise on the F lever, string 4.

This thread describes it:

http://bb.steelguitarforum.com/viewtopi ... 61b6cd570d

Does anybody have or make these?

EDIT: D'oh! I just realized there is a description in that thread of a way to get the F with a second rod. I'll just do that.

Andrew Buhler · Post by **Andrew Buhler** » 10 Aug 2016 6:17 am

I highly recommend the alternate Greg describes in the link you provided, as it works just fine. I'm sure Greg or Billy Knowles can fashion the rod for you in case you don't have the parts.

Michael Hutchison · Post by **Michael Hutchison** » 12 Aug 2016 12:01 pm

Anybody know a source for the changer tuning nuts? I need at least one more for the F change and would like them to match.

They are a hex socket barrel nut of some kind it seems. Never seen that in a hardware store.

John Gilman · Post by **John Gilman** » 15 Aug 2016 11:14 am

I am speculating, but as best I can tell, Zane must have made them himself. Take a 10-32 or 10-24 by 1 3/4 or longer cap screw (the threads don't go all the way up to the head). Cut it off about 3/8 from the head. Chuck it up in a lathe and drill and tap it to 6-32.

I looked and looked for standard hardware with the same diameter shoulder, the same size hex and 6-32 threads and there just isn't anything like that.

Maybe Michael Yahl or someone else has better info, but that's what I was able to come up with.

Andrew Buhler · Post by **Andrew Buhler** » 15 Aug 2016 11:34 am

I know Billy Knowles can supply the changer tuning nuts as well: http://steelguitareast.com/