Tuning HELP
Moderator: Shoshanah Marohn
-
- Posts: 6
- Joined: 17 Dec 2015 7:57 am
- Location: New Jersey, USA
Tuning HELP
Hey guys This is Sean Ronan again thank you for all your help on my last post titled begginner looing for help with the basics. Sorry I havent gotten back to eveyone Ive been messing around alot with the Steel and checking out eveything. Can Anyone help my tune my zumsteel encore to E9 Chromatic right now all the strings are tuned straight on but when i was looking at Jeffran College Tuning chart he said some need to to .5 sharp or flat can anyone help with this?
Also how do you tune the knee levels and pedals the RIGHT way
Thanks Guys!
Also how do you tune the knee levels and pedals the RIGHT way
Thanks Guys!
- Doug Earnest
- Posts: 2132
- Joined: 29 Mar 2000 1:01 am
- Location: Branson, MO USA
-
- Posts: 6530
- Joined: 2 Oct 1998 12:01 am
- Location: Portland, OR USA
-
- Posts: 6
- Joined: 17 Dec 2015 7:57 am
- Location: New Jersey, USA
Tuning HELP
Hey Doug, Got it I havent touched it at all but was just trying to understand the tuning more for ex the first string F# is tuned 6 cents sharp ?
- Henry Matthews
- Posts: 3974
- Joined: 7 Mar 2002 1:01 am
- Location: Texarkana, Ark USA
Sean, it's called tempered tuning and is what I've found works for me. Never used the Jeff Newman chart but am assuming it is tempered tuning or a variation of it. I'm sure someone will correct me if I'm wrong.
For some musical reason, if all the strings and pulls are tuned to exact 440, then the guitar doesn't sound in tune with it's self.
Some I understand use this method and it works for them. It sounds out of tune to me so I use tempered tuning starting with the E's at 440 with A & B pedals down, to compensate for cabinet drop. Then I tune rest of strings to where there is no wobble in the sound of any strings with any other except for 7th string and you have to tune it to just a happy medium to rest of strings as for some musical reason, it can't be exactly in tune with all strings.
There are guys on here that know those musical reasons but me, I could care less why, I just know what sounds in tune and what doesn't to me. Just do a search on here for tuning and there are 100's of threads that may provide you more info.
For some musical reason, if all the strings and pulls are tuned to exact 440, then the guitar doesn't sound in tune with it's self.
Some I understand use this method and it works for them. It sounds out of tune to me so I use tempered tuning starting with the E's at 440 with A & B pedals down, to compensate for cabinet drop. Then I tune rest of strings to where there is no wobble in the sound of any strings with any other except for 7th string and you have to tune it to just a happy medium to rest of strings as for some musical reason, it can't be exactly in tune with all strings.
There are guys on here that know those musical reasons but me, I could care less why, I just know what sounds in tune and what doesn't to me. Just do a search on here for tuning and there are 100's of threads that may provide you more info.
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
If you have the money, the Peterson tuner already has a couple pedal steel presets built in.
Or, some the Seiko tuners have a cent display, which makes it really easy.
http://www.musiciansfriend.com/accessor ... bass-tuner
Or, some the Seiko tuners have a cent display, which makes it really easy.
http://www.musiciansfriend.com/accessor ... bass-tuner
2- Rittenberry D10's
Quilter Steelaire. Nashville 400. Session 500
Quilter Steelaire. Nashville 400. Session 500
-
- Posts: 447
- Joined: 19 Oct 2013 8:46 am
- Location: New York, USA
I second this.Dan Klotz wrote:If you have the money, the Peterson tuner already has a couple pedal steel presets built in.
Or, some the Seiko tuners have a cent display, which makes it really easy.
http://www.musiciansfriend.com/accessor ... bass-tuner
Sean in your tips for beginners I put a list of items you are going to want to get. I had to learn about each one the hard way.
I've played steel for almost three years now and for me the tuner is a game changer. Prior too, I was not able to get my steel in tune as good as I can with this tuner. I know some people can get the steel in tune without one, I definitely can not. I highly recommend it.
I also encourage you to not only to ask questions but use the search function on the topics. You will find so many expert opinions from previous threads. This forum really is a treasure trove of information.
- Roger Palmer
- Posts: 190
- Joined: 12 Nov 2008 3:54 pm
- Location: Rossendale, UK
-
- Posts: 447
- Joined: 19 Oct 2013 8:46 am
- Location: New York, USA
Roger Palmer wrote:If you have an iPhone ot iPad you can get
the clear tune tuner quite cheap
You can put the Newman tuning offsets into it
I had a tuner that measured cents. Worked great on my guitar was awful for my PSG. I'm sure others would have great results with it, I just don't have that great of ears for fine tuning and this thing didn't seem that accurate.
At any rate the peterson is so accurate and simple to use. I finally am able to tune the damn thing quickly.
If someone can save money and get in tune more power to them, but I need the Peterson tuner.
-
- Posts: 51
- Joined: 17 May 2016 1:23 pm
- Location: Arkansas, USA
- Johan Forsman
- Posts: 67
- Joined: 10 Mar 2015 12:27 pm
- Location: Sweden
-
- Posts: 597
- Joined: 10 Jan 2003 1:01 am
- Location: San Jose, California, USA
Sean,
The short answer to your question is that there is no need to buy an expensive tuner to tune a pedal steel guitar; any decent tuner that displays Hz and cents will do.
There are tuners like that for under $20, such as the Seiko mentioned above.
The other thing you will need is a tuning chart, and Jeff Newman’s will do fine; it is available as a free download at: http://www.jeffran.com/tuning.php
----------------------------------------------------------------------------
Here is the longer answer as to why tuning the pedal steel is so challenging…
About 2500 years ago, the Greek mathematician Pythagoras used mathematical ratios to discover the musical intervals that sounded the most in tune to the human ear. When a fixed-pitch instrument is tuned to “Pythagorean Tuning†based on the “pure†or “perfect†interval between the root and the fifth scale-notes of the key, most people find this tuning system very pleasing and harmonious.
For more info: https://en.wikipedia.org/wiki/Pythagorean_tuning
However, there is a big problem with “Pythagorean Tuningâ€, and that is that it only works for a couple of closely related keys; certain notes in other keys will sound out of tune. This is due to the mathematics of calculating musical interval ratios between root and fifth notes that Pythagorean Tuning uses.
- For example, an A note will be 440 Hz in the key of A, but be 446.1 in the key of D. A difference of 6.1 Hz will sound very out of tune, even to non-musicians!
Why does this matter to steel guitarists?
Because much of the time when you engage a pedal or knee lever, you are effectively playing in a new key:
- When you step on the A and B pedals together, you are effectively modulating from the key of E to the key of A; now the root note is A and the fifth scale tone is E.
- When you engage the A pedal and the knee lever that raises your E’s to F, you are effectively playing in the key of C#; now the root note is C# and the fifth scale tone is G#.
This means that the note which was the root in one key is no longer the root and neither is the note that was the fifth scale-tone. And the third scale-tones are often out of tune in the new key, which means that many chords do not sound good.
The “Equal Temperament†Compromise
Pythagoras' “pure intonation†tuning system was widely used for over 2000 years, despite the limitation to just one or two keys.
In the 1600s, JS Bach joined the movement to alter the tuning system so that music could be played in all 12 keys, by writing a collection of preludes called the “Well-Tempered Clavierâ€. To perform these preludes, the clavier (an early form of a piano) was tuned “equally temperedâ€, a compromise tuning in which an A always equals 440 no matter what key is being played. This compromise is not noticeable to most non-musicians—and musicians just learn to accept it.
For more info:
https://en.wikipedia.org/wiki/Equal_temperament
https://en.wikipedia.org/wiki/The_Well-Tempered_Clavier
This compromise “Equal Temperament†(ET) tuning system became widely used in the Western world, and is the system used in most electronic tuners. However, many pedal steel guitarists are not comfortable with how their steel guitars sound when tuned to ET, and they adjust most of the notes with “Just Intonation†(JI) which is very close to Pythagoras’ “pure intonationâ€.
For a good summary of all of the above topics: https://en.wikipedia.org/wiki/Just_intonation
*********************************************************************
“Just Intonation†tuning charts for the pedal steel:
Many years ago, Jeff Newman used a very accurate stroboscopic tuner to measure the frequency of the “Just Intonation†tuning system that Lloyd Green used in the recording studio. From these measurements, Newman produced his first tuning chart based on A equals 440. (Later he produced a second version in which A equals 441--apparently to accommodate “cabinet dropâ€.)
I prefer Jeff Newman’s first tuning chart (A=440) with the pedals down, and then I adjust the pedals-up B strings from the pedals-up E strings to accommodate cabinet drop. I got this idea from Larry Bell at: http://www.larrybell.org/id29.htm
I still use a Boss TU-12 tuner that I bought 20 years ago for about $45--with a copy of Newman’s tuning chart taped inside the cover.
What looks to me to be the same tuner is now called Boss TU-12H, and it still costs just $45!
However, any chromatic electronic tuner that displays both Hz and cents should work fine.
I hope this is helpful.
-Dave
The short answer to your question is that there is no need to buy an expensive tuner to tune a pedal steel guitar; any decent tuner that displays Hz and cents will do.
There are tuners like that for under $20, such as the Seiko mentioned above.
The other thing you will need is a tuning chart, and Jeff Newman’s will do fine; it is available as a free download at: http://www.jeffran.com/tuning.php
----------------------------------------------------------------------------
Here is the longer answer as to why tuning the pedal steel is so challenging…
About 2500 years ago, the Greek mathematician Pythagoras used mathematical ratios to discover the musical intervals that sounded the most in tune to the human ear. When a fixed-pitch instrument is tuned to “Pythagorean Tuning†based on the “pure†or “perfect†interval between the root and the fifth scale-notes of the key, most people find this tuning system very pleasing and harmonious.
For more info: https://en.wikipedia.org/wiki/Pythagorean_tuning
However, there is a big problem with “Pythagorean Tuningâ€, and that is that it only works for a couple of closely related keys; certain notes in other keys will sound out of tune. This is due to the mathematics of calculating musical interval ratios between root and fifth notes that Pythagorean Tuning uses.
- For example, an A note will be 440 Hz in the key of A, but be 446.1 in the key of D. A difference of 6.1 Hz will sound very out of tune, even to non-musicians!
Why does this matter to steel guitarists?
Because much of the time when you engage a pedal or knee lever, you are effectively playing in a new key:
- When you step on the A and B pedals together, you are effectively modulating from the key of E to the key of A; now the root note is A and the fifth scale tone is E.
- When you engage the A pedal and the knee lever that raises your E’s to F, you are effectively playing in the key of C#; now the root note is C# and the fifth scale tone is G#.
This means that the note which was the root in one key is no longer the root and neither is the note that was the fifth scale-tone. And the third scale-tones are often out of tune in the new key, which means that many chords do not sound good.
The “Equal Temperament†Compromise
Pythagoras' “pure intonation†tuning system was widely used for over 2000 years, despite the limitation to just one or two keys.
In the 1600s, JS Bach joined the movement to alter the tuning system so that music could be played in all 12 keys, by writing a collection of preludes called the “Well-Tempered Clavierâ€. To perform these preludes, the clavier (an early form of a piano) was tuned “equally temperedâ€, a compromise tuning in which an A always equals 440 no matter what key is being played. This compromise is not noticeable to most non-musicians—and musicians just learn to accept it.
For more info:
https://en.wikipedia.org/wiki/Equal_temperament
https://en.wikipedia.org/wiki/The_Well-Tempered_Clavier
This compromise “Equal Temperament†(ET) tuning system became widely used in the Western world, and is the system used in most electronic tuners. However, many pedal steel guitarists are not comfortable with how their steel guitars sound when tuned to ET, and they adjust most of the notes with “Just Intonation†(JI) which is very close to Pythagoras’ “pure intonationâ€.
For a good summary of all of the above topics: https://en.wikipedia.org/wiki/Just_intonation
*********************************************************************
“Just Intonation†tuning charts for the pedal steel:
Many years ago, Jeff Newman used a very accurate stroboscopic tuner to measure the frequency of the “Just Intonation†tuning system that Lloyd Green used in the recording studio. From these measurements, Newman produced his first tuning chart based on A equals 440. (Later he produced a second version in which A equals 441--apparently to accommodate “cabinet dropâ€.)
I prefer Jeff Newman’s first tuning chart (A=440) with the pedals down, and then I adjust the pedals-up B strings from the pedals-up E strings to accommodate cabinet drop. I got this idea from Larry Bell at: http://www.larrybell.org/id29.htm
I still use a Boss TU-12 tuner that I bought 20 years ago for about $45--with a copy of Newman’s tuning chart taped inside the cover.
What looks to me to be the same tuner is now called Boss TU-12H, and it still costs just $45!
However, any chromatic electronic tuner that displays both Hz and cents should work fine.
I hope this is helpful.
-Dave
- Johan Forsman
- Posts: 67
- Joined: 10 Mar 2015 12:27 pm
- Location: Sweden
With regards to the question of tuning with tuner or by ear...my two cents: I've heard it said (written) many times on here that if you cannot tune by ear how are you going to be able to play in tune. I agree to some extent that if you're not able to hear when something is out of tune it will be hard to correct any sour notes (while playing) and correct them, and thus learn to play in tune.
On the other hand I think for a beginner (as myself) there are so many things to learn so if I can get going with playing with a guitar that is in tune (tuned by machine) rather than spending hours doing it by ear I'll go for that. It's not like tuning is the most fun part, even though it is not boring at all
I appreciate the importance of training my ears to hear when in or out of tune so every now and then I de-tune the guitar and try to tune it by ear, yet to get it as good as with my Peterson tuner though.
My goal is to be able to tune it up by ear, not that it will be faster but for times when the tuner is misplaced or whatever. I have a very hard time believing that it actually CAN be faster than using a tuner with programmed offsets that work for your guitar. Except for adjusting particular strings in between songs, e.g..
On the other hand I think for a beginner (as myself) there are so many things to learn so if I can get going with playing with a guitar that is in tune (tuned by machine) rather than spending hours doing it by ear I'll go for that. It's not like tuning is the most fun part, even though it is not boring at all
I appreciate the importance of training my ears to hear when in or out of tune so every now and then I de-tune the guitar and try to tune it by ear, yet to get it as good as with my Peterson tuner though.
My goal is to be able to tune it up by ear, not that it will be faster but for times when the tuner is misplaced or whatever. I have a very hard time believing that it actually CAN be faster than using a tuner with programmed offsets that work for your guitar. Except for adjusting particular strings in between songs, e.g..
- Johan Forsman
- Posts: 67
- Joined: 10 Mar 2015 12:27 pm
- Location: Sweden
-
- Posts: 8173
- Joined: 3 Jan 2002 1:01 am
- Location: Buffalo, N.Y.
- Contact:
My vote goes to the tuning system on the Buddy Emmons site. It sounds harmonious, is easy to use, and works for guitars that have substantial cab drop and those that don't. There are a few note combinations to avoid.
I use the Petersen Strobe. But I have not had good luck with its stock presets for PSG. I read the cents off the tuner to set my modifiers and open strings.
Because we tune by ear as we play, players find a system that work for them and tend to stay with it. To each their own.
John
I use the Petersen Strobe. But I have not had good luck with its stock presets for PSG. I read the cents off the tuner to set my modifiers and open strings.
Because we tune by ear as we play, players find a system that work for them and tend to stay with it. To each their own.
John