Volume pedal - String or gear driven?
Moderator: Shoshanah Marohn
- David Black
- Posts: 5
- Joined: 12 Mar 2012 9:04 am
- Location: Alabama, USA
Volume pedal - String or gear driven?
Volume pedals come in various designs. Most steel players prefer the simple potentiometer (i.e. "pot") pedals due to their superiority in maintaining tonal quality. There are usually two types of these pedals. One type uses a string around a pulley or bushing that is mounted to the pot's shaft. The other type uses a 'gear driven' method to turn the pot. The advantage of this latter type is that you don't have to worry about string breakage at inopportune times. With this in mind which type AND BRAND do you use and why?
Sho-Bud Professional, Sho-Bud Pro II, GFI Ultra (SD-10), Fessenden (SD-10), 2 Session 500's, 1 Session 400, 1 Fender Frontman 25R.
- Ray Lamoureux
- Posts: 132
- Joined: 31 Jan 2008 4:51 pm
- Location: Hartford,New York, USA
Volume pedal - String or gear driven
HI David, I tried in my Goodrich 120 pedal a rack & barrel,I then went back to the string because I though the string was a little faster than the rack.
Ray Lamoureux,Hartford,NY GFI 10st.,on double frame,& aTT-112 amp ..
-
- Posts: 87
- Joined: 27 Apr 2010 11:42 am
- Location: Satellite Beach, FL
David, I've never tried a "string " operated volume pedal as I originally bought an MSA pedal to go along with my new ( at that time ) MSA guitar. The MSA pedal is gear driven.
Not too long ago, I bought one of Doug Earnest's, Stage One volume pedals, which is also gear driven. It is a fine piece and I'm using it most of the time, now.
So, for me, a gear driven volume pedal works just fine and I don't have to think about string breakage/replacement. I watched a friend have that problem during a performance. Not good.
Maybe I should try a string operated VP, just to see if there is any noticeable difference. Good question.
Doug
Not too long ago, I bought one of Doug Earnest's, Stage One volume pedals, which is also gear driven. It is a fine piece and I'm using it most of the time, now.
So, for me, a gear driven volume pedal works just fine and I don't have to think about string breakage/replacement. I watched a friend have that problem during a performance. Not good.
Maybe I should try a string operated VP, just to see if there is any noticeable difference. Good question.
Doug
- richard burton
- Posts: 3846
- Joined: 23 Jan 2001 1:01 am
- Location: Britain
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
A gear-driven pot pedal could also have a low profile if the rack was horizontal. but the main reason I don't like the gears is that you can feel the bumpity-bump when you move the pedal. On all the pedals I've tried, they use square-cut gears. Helical-cut gears would eliminate or substantually reduce that rough feel.
Of course, If a gear is all you've used, then you would never know the smoothness that you get with a string or tape.
Of course, If a gear is all you've used, then you would never know the smoothness that you get with a string or tape.
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
I have a Goodrich 120 (with an original Allen Bradley pot). But I use a Hilton - no pot and no string or gear.
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
- Bo Borland
- Posts: 3947
- Joined: 20 Dec 1999 1:01 am
- Location: South Jersey -
- Contact:
I have an old MSA , a Goodrich and a Hilton.
I don't see a noticeable change in tone, enough to bother me, between the pot pedals and the Hilton.
The Hilton is my stage pedal, the MSA is currently on my practice set up, mostly because it attaches to the pedal board.
The Hilton has seen little use, ever since i bought as a spare.
If the gear driven one annoys you or is distracting, try adjusting the tension of the drive stick , on the MSA there is a metal plate you can adjust.
I went to Hilton because of the lack of good pots at the time. I don't need to carry a spare.
Has anyone ever noticed an interaction between stage lights and a Hilton?
I don't see a noticeable change in tone, enough to bother me, between the pot pedals and the Hilton.
The Hilton is my stage pedal, the MSA is currently on my practice set up, mostly because it attaches to the pedal board.
The Hilton has seen little use, ever since i bought as a spare.
If the gear driven one annoys you or is distracting, try adjusting the tension of the drive stick , on the MSA there is a metal plate you can adjust.
I went to Hilton because of the lack of good pots at the time. I don't need to carry a spare.
Has anyone ever noticed an interaction between stage lights and a Hilton?
- John De Maille
- Posts: 2266
- Joined: 16 Nov 1999 1:01 am
- Location: On a Mountain in Upstate Halcottsville, N.Y.
- John Swain
- Posts: 1576
- Joined: 12 Feb 2000 1:01 am
- Location: Newberry,SC