Question regarding tone control on guitar

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Howard Steinberg
Posts: 604
Joined: 2 Mar 2012 8:46 am
Location: St. Petersburg, Florida , USA

Question regarding tone control on guitar

Post by Howard Steinberg »

many thanks in advance for the good information you guys always have for me. I have an early 70's tele custom with the Gibson style electronics (2 vol., 2 tone, 3 way toggle. The only electronics modification was a coil tap added to the original humbucker.

Neither tone control works. I'm wondering if the orange things (capacitors?) should be changed out as a starting point to address this problem. Any insight is greatly appreciated.
Justice Pro Lite (4-5), Justice D-10 (8-5)x2 , Quilter Steelaire, Hilton Pedal, BJ's bar.
User avatar
Craig Baker
Posts: 1330
Joined: 19 Apr 2013 7:17 pm
Location: Eatonton, Georgia, USA - R.I.P.

Post by Craig Baker »

Howard,
Without putting the guitar on the workbench it's a guessing game, but the caps would be the last thing I would suspect. Probably a mis-wire or broken connection somewhere.

Best regards,
Craig Baker 706-485-8792

cmbakerelectronics@gmail.com

C.M. Baker Electronics
P.O. Box 3965
Eatonton, GA 31024
"Make America Great Again". . . The Only Country With Dream After Its Name.
User avatar
Howard Steinberg
Posts: 604
Joined: 2 Mar 2012 8:46 am
Location: St. Petersburg, Florida , USA

Post by Howard Steinberg »

Thanks Craig. I'll open it up and see if I can detect anything questionable. Howard
Justice Pro Lite (4-5), Justice D-10 (8-5)x2 , Quilter Steelaire, Hilton Pedal, BJ's bar.
User avatar
Jerry Jones
Posts: 841
Joined: 6 Sep 2007 4:26 pm
Location: Franklin, Tenn.

Post by Jerry Jones »

Since neither tone control works, I would guess that the ground wire is missing/broken that connects the back of the tone pots to the jack sleeve (ground). Got an image?
Jerry Jones
Robert Bunting
Posts: 59
Joined: 18 Sep 2011 8:54 am
Location: New York, USA

Schematics

Post by Robert Bunting »

User avatar
Clete Ritta
Posts: 2005
Joined: 5 Jun 2009 6:58 pm
Location: San Antonio, Texas

Post by Clete Ritta »

Robert, that is a great list of diagrams, but not a single one has 4 pots! This was actually pretty funny to me by the 64th diagram, haha. :D
Howard Steinberg wrote:...Gibson style electronics (2 vol., 2 tone, 3 way toggle. The only electronics modification was a coil tap added to the original humbucker...
He may have better luck with the typical les paul diagram.
Im guessing a wire or two is loose inside is all.

Image
User avatar
Howard Steinberg
Posts: 604
Joined: 2 Mar 2012 8:46 am
Location: St. Petersburg, Florida , USA

Post by Howard Steinberg »

Thanks to all who have replied. The guitar is in Florida at the present time. I'll be there in a few weeks and will open it up to see what gives. I'll follow up once I have a look.
Justice Pro Lite (4-5), Justice D-10 (8-5)x2 , Quilter Steelaire, Hilton Pedal, BJ's bar.
User avatar
Howard Steinberg
Posts: 604
Joined: 2 Mar 2012 8:46 am
Location: St. Petersburg, Florida , USA

Post by Howard Steinberg »

I finally got to dealing with this today. It did turn out to be a problem with a solder joint on a ground wire. Thanks to all who helped me with this.
Justice Pro Lite (4-5), Justice D-10 (8-5)x2 , Quilter Steelaire, Hilton Pedal, BJ's bar.
Post Reply