What do you do for a living?
Moderator: Shoshanah Marohn
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
-
- Posts: 895
- Joined: 9 Aug 2004 12:01 am
- Location: Punta Gorda, Florida, USA
- Contact:
- Jan Viljoen
- Posts: 480
- Joined: 30 Mar 2011 7:00 am
- Location: Pretoria, South Africa
To Ernest Bovine,
Here you go, about my RC flying reptile.
My Ramphorynchus is really impressive and it draws attention.
http://bb.steelguitarforum.com/viewtopi ... s&start=25
Here you go, about my RC flying reptile.
My Ramphorynchus is really impressive and it draws attention.
http://bb.steelguitarforum.com/viewtopi ... s&start=25
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
-
- Posts: 103
- Joined: 26 Feb 2011 6:50 pm
- Location: Tennessee, USA
- Contact:
-
- Posts: 103
- Joined: 26 Feb 2011 6:50 pm
- Location: Tennessee, USA
- Contact:
-
- Posts: 18
- Joined: 5 Aug 1999 12:01 am
- Location: St. Marys PA USA
- Peter Huggins
- Posts: 261
- Joined: 20 Jun 2010 9:33 pm
- Location: Van Nuys, California, USA
In the past I directed cars where to park at the Greek Theater in Griffith Park. I was fortunate to work the VIP/Press/Performers gate and met many famous and non-famous musicians and artists. Worked in a Radio Station (KGBS-FM, no longer in business) for about a year, then at the original Schecter Guitar Research for about two years. Ended up becoming an operator for Pacific Telephone (PT&T division of AT&T, after the breakup of the Bell System it became Pacific Bell, then Pacific Telesis, then SBC, then the new at&t [lower-case]). Also I drove a taxi off and on during the first five years of those jobs. Took a buy-out from the phone co. after 28 1/2 years, bought a 15-foot bobtail truck from Penske and transported musical instruments between Tacoma and Dallas, as well as roadie/tech/crew work for various pro and semi-pro musicians. This until the money ran out. My truck's transmission gave up the ghost in Texas (Hi Richard!) and after I towed it home I ended up selling it. Now I am once again driving a taxicab on the night shift, plus working in a guitar store a couple days a week. I still do the roadie/tech/cartage gigs when I am offered them, and drive truck to the TX Guitar Shows twice a year. I ran cameras and crew for the Deke Dickerson Guitar Geek Festival for nine of the ten years that Deke put it on (Will some corporate sponsor please contact Deke and provide the financial support to allow him to produce Geekfests again!). Also I do historical research on guitars. I play guitar, non-pedal steel or bass as required when solicited, and try to remember to play for my own enjoyment once in a while!
A big THANKS to all my friends, here and everywhere !
- Joachim Kettner
- Posts: 7523
- Joined: 14 Apr 2009 1:57 pm
- Location: Germany
- Dale Rottacker
- Posts: 3513
- Joined: 3 Aug 2010 6:49 pm
- Location: Walla Walla Washington, USA
- Contact:
Been working with wood most of my working life...
Head Saw Filer at a sawmill where we cut sounding board for Steinway, Baldwin when there were still in business, Martin and Gibson guitars and other specialty types of wood products... I take care of Large Bandsaws from 30 to over 50 feet long, up to 12 inches wide with teeth on both edges... get cut more times then I can count, but have been blessed to still having ALL my fingers.
Head Saw Filer at a sawmill where we cut sounding board for Steinway, Baldwin when there were still in business, Martin and Gibson guitars and other specialty types of wood products... I take care of Large Bandsaws from 30 to over 50 feet long, up to 12 inches wide with teeth on both edges... get cut more times then I can count, but have been blessed to still having ALL my fingers.
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
- Daniel Policarpo
- Posts: 1941
- Joined: 5 May 2010 9:01 pm
- Location: Tulsa, Oklahoma
This is a really interesting thread. I've been a freelance technical and marketing writer for the last 7 or 8 years but have recently taken more time to work my fiction writing.
A few weeks ago I started a blog up to give my most recent story a home. It's a serialized account in the True Crime/Mystery genre with new posts every week or so. My webpage is called Blood Ledger and you can take a gander at it here:
http://www.bloodledger.com/
Thanks.
~Dan
A few weeks ago I started a blog up to give my most recent story a home. It's a serialized account in the True Crime/Mystery genre with new posts every week or so. My webpage is called Blood Ledger and you can take a gander at it here:
http://www.bloodledger.com/
Thanks.
~Dan
Li'l Izzy for Guvner
- George Buechley
- Posts: 512
- Joined: 11 Jul 2011 7:13 am
- Location: Indiana, USA
- Charlie McDonald
- Posts: 11054
- Joined: 17 Feb 2005 1:01 am
- Location: out of the blue
- Daniel Policarpo
- Posts: 1941
- Joined: 5 May 2010 9:01 pm
- Location: Tulsa, Oklahoma
Thanks for the feedback, Charlie.Charlie McDonald wrote:You call this living?
Good PI story, Daniel, from a professional.
I call myself a writer, but it's not a living.
Your blog gives me ideas. The toughest thing to deal with, whether in fiction or memoir, is the self-conscious first-person narrator.
Yeah, if sitting at a desk 4-10 hours a day is living...
I think writing is maybe the one profession that pays less than steel guitar.
George, much appreciated. I painted myself into a corner by putting this out as a serial, so now I got to see it through. If you want to keep reading, I'll keep writing it.
Thanks for taking a look guys.
Li'l Izzy for Guvner
-
- Posts: 131
- Joined: 11 May 2005 12:01 am
- Location: Kansas City (Roeland Park)
- Contact:
- George Buechley
- Posts: 512
- Joined: 11 Jul 2011 7:13 am
- Location: Indiana, USA
Hey Daniel,
I know what you mean by painting yourself into a corner. Time is the one thing that holds many of us back. I know how much time I spend practicing steel and Dobro. And I know how much time it takes to type that many words in a blog. You may want to keep the basic ideas going and accumulate them through the years. Who knows how they may gel later in your life when you may have the time to actually write the novels that you're dreaming about now. You're a good writer! I like your style.
George
I know what you mean by painting yourself into a corner. Time is the one thing that holds many of us back. I know how much time I spend practicing steel and Dobro. And I know how much time it takes to type that many words in a blog. You may want to keep the basic ideas going and accumulate them through the years. Who knows how they may gel later in your life when you may have the time to actually write the novels that you're dreaming about now. You're a good writer! I like your style.
George
Pre WWII Dobro, Sho~Bud Pro II Custom, Peavey Session 115, GFI Expo, Roland Cube XL80, Lil Izzy
-
- Posts: 217
- Joined: 15 Mar 2013 2:47 pm
- Location: Missouri, USA
I'm retired now, but from 1980 to 2008 I was a police officer. I had to retire in 2008 at 61 because of health issues, but I spend a lot of time playing my steel for my own enjoyment and spending time with my family. Grandchildren are great!
GFI Expo SD10, Nashville 112, Steelers choice Pak-a- seat, Carter vol. pedal, Stage one vol. pedal, Peavey Deltafex. Goodrich volume pedal.
- Charlie McDonald
- Posts: 11054
- Joined: 17 Feb 2005 1:01 am
- Location: out of the blue
In a conversation with Jamie Oldaker, who's writing his memoirs, he said of the task that it's 'an unending chore.'Daniel Policarpo wrote: Yeah, if sitting at a desk 4-10 hours a day is living...
--------------
For those not familiar with the name, he's the drummer on 'I Shot The Sheriff,' toured with Clapton, and laid down tracks for the Beegees' disco albums. So he has a lot of career to write.
Undoubtedly, one of his stories will be of those sessions. Called to LA for his impeccable time, he laid his best tracks, which the engineers
spent countless hours after making the time even more perfect. Go figure. Nowadays, I understand they have electronic mapping to do that.
I don't know which of those jobs is a harder living, writing, drumming, or engineering. No wonder we retire and play steel guitar.
- Daniel Policarpo
- Posts: 1941
- Joined: 5 May 2010 9:01 pm
- Location: Tulsa, Oklahoma
Thanks for the kind words, George. I think I am going to give this story about 6 weeks. I got a novel I am working on, a couple plays, and other much shorter stories I'd like to find avenues for possible publication. I thought this PI pulp story would lend itself using the Serialized format that newspapers used to run in older times. Baiting a new hook after each installment is part of the thing for the True Crime/ mystery genre. But it's a different culture. People power-watch entire seasons of tv series over a weekend or a single day now. They don't like to wait week to week for new developments.George Buechley wrote:Hey Daniel,
I know what you mean by painting yourself into a corner. Time is the one thing that holds many of us back. I know how much time I spend practicing steel and Dobro. And I know how much time it takes to type that many words in a blog. You may want to keep the basic ideas going and accumulate them through the years.
Charlie, I bet Jamie Oldaker has some great stories. That would be a hell of a vantage point to explore. I'd like to read Cal Sharpe's fictional work. If I recall correctly, I believe he also used the murder mystery format?
Thanks again!
~Dan
Li'l Izzy for Guvner
- Jeff Garden
- Posts: 3645
- Joined: 21 Aug 2003 12:01 am
- Location: Center Sandwich, New Hampshire, USA
- Barbara Berg
- Posts: 111
- Joined: 17 Dec 2012 1:20 pm
- Location: Washington, USA
Non professional
Love playing lap steel, picked it up after 55 yrs, now play lots of open mic's and benefit shows. In the Air Force six years during Vietnam, trained gaming and barrel horses, volunteer Firefighter and EMT for 20 yrs. Worked auctions for 17 years penning cattle, bid spotter, and clerk aside of auctioneer. Still raise a few beef cattle and sell eggs. It's a challenging instrument, and I still have lots to learn about the lady! Reading all of your stories only makes me want to keep playing!
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)