Keyless vs Keyed
Moderator: Shoshanah Marohn
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
Chris,
When I saw simple beauty!my first Kline, I was impressed by it's simple beauty. Form follows function. I studied architecture, and the Kline was so impressive.
When I saw simple beauty!my first Kline, I was impressed by it's simple beauty. Form follows function. I studied architecture, and the Kline was so impressive.
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- George Redmon
- Posts: 3529
- Joined: 8 Apr 2005 12:01 am
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State
When Buddy was playing a Sierra, he said he switched back to a keyed guitar because of the look. For me, changing strings on a keyless is more cumbersome than a keyed guitar.
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
I've had Sierra and Williams keyless. Both were much easier to change strings on than any tuning keys I've used. Maybe I don't have the technique right for threading and winding tuning keys. To me, they're a pain in the ass.Chris Templeton wrote:For me, changing strings on a keyless is more cumbersome than a keyed guitar.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State
- Tony Glassman
- Posts: 4470
- Joined: 18 Jan 2005 1:01 am
- Location: The Great Northwest
- Rich Upright
- Posts: 1183
- Joined: 30 Sep 2014 9:55 am
- Location: Florida, USA
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
"I have never heard a keyless guitar that I thought sounded anywhere near as good as a keyhead guitar.
_________________"
Never heard a Kline?
_________________"
Never heard a Kline?
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
-
- Posts: 324
- Joined: 4 Aug 1998 11:00 pm
- Location: Marshfield, MO
Hands of the player
Check out Bob Tuttle's youtube rose colored glasses.
Even Big E said the best sounding C6th was his keyless Sierra. I saw Jack Musgrave play a show where he played his push pull Emmons the first set and then played his GFI keyless the 2nd set. Another steel player and I both agreed the keyless sounded the best at that venue.
Even Big E said the best sounding C6th was his keyless Sierra. I saw Jack Musgrave play a show where he played his push pull Emmons the first set and then played his GFI keyless the 2nd set. Another steel player and I both agreed the keyless sounded the best at that venue.
Keyless Guitars
John,
That was priceless!
Gary in Medina
That was priceless!
Gary in Medina
Emmons LeGrande D-10
GFI Ultra D-10 keyless
Quilter SteelAire
GFI Ultra D-10 keyless
Quilter SteelAire
- Rich Upright
- Posts: 1183
- Joined: 30 Sep 2014 9:55 am
- Location: Florida, USA
Actually, my best musician friend & steeler in my first country band in NYC had a Kline D-10, and just did not like the sound. Also heard Jeff Newman play one at the Watertown steel thing once, & I thought it just sounded dead,dull, & lifeless. I guess it's all what tone you like. My favorite is push-pull,I just like the resonance of an aluminum neck, like LeGrande, Mullen,Zum,Franklin,JCH,etc.John Billings wrote:"I have never heard a keyless guitar that I thought sounded anywhere near as good as a keyhead guitar.
_________________"
Never heard a Kline?
A couple D-10s,some vintage guitars & amps, & lotsa junk in the gig bag.
Have you ever heard a keyless guitar with an aluminum neck?Rich Upright wrote:My favorite is push-pull,I just like the resonance of an aluminum neck, like LeGrande, Mullen,Zum,Franklin,JCH,etc.
Sierra keyless guitars had aluminum bodies and wood necks. How's that for a switch?
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
My band opened for Loretta at Ponderosa Park. I walked into the backstage room, and there was my hero. Papa John. I freaked, but he put me at ease within 30 seconds. Wonderful man! As I unpacked and set up My Kline Uni, he became very interested. He ordered one a couple weeks later. I don't know how much he used it, but he did have one.
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
- Mark van Allen
- Posts: 6378
- Joined: 26 Sep 1999 12:01 am
- Location: Watkinsville, Ga. USA
- Contact:
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
"3rd strings up to pitch without breakage,"
Never, ever, had that problem with my Kline. With my '72 Shobud? Yes!
Never, ever, had that problem with my Kline. With my '72 Shobud? Yes!
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
Keyless Guitars
Of all the steels that I've owned, my GFI keyless has had far fewer broken strings. I usually change strings because they lose tone, and/or corrode, not because they are broken. Less string travel,less string breakage.
Emmons LeGrande D-10
GFI Ultra D-10 keyless
Quilter SteelAire
GFI Ultra D-10 keyless
Quilter SteelAire
- George Redmon
- Posts: 3529
- Joined: 8 Apr 2005 12:01 am
b0b, I've found, that most of the guys who try to find excuses for owning and playing a keyed steel guitar, have never played a keyless. This thread hasn't changed much since it was first posted. It's not a matter of taste for me, or appearance. It's a matter of what works better, is cleaner, and sounds better. A keyless is compact.
I can't for the life of me, see how someone could compare the playability of an old Emmons Push~Pull, to a modern steel guitar. But they try. Respectfully, I don't think some could actually tell the difference in sound between one steel or another. But it does prove my point. All of my keyless steels have aluminum necks. What I find entertaining with some of these post, is the lack of knowledge. So many, know so little about keyless steel guitars. Keyless steel guitars have been around longer then some that make comments about them. I won't go back to a keyed steel guitar. Yes I use to play keyed steel guitars, I can't stand those top & side heavy, awkward looking things.
b0b, it's not that some don't like the looks of a keyless, I'm actually starting to think, by reading some of these post. That a few are actually intimidated by the looks of a keyless. And the phrase "I'm too old to change" comes to mind here. So keep winding strings, cranking tuning keys, spilling the beer reaching for the wire cutters, messing with pedal tuning sleeves, breaking 3rd strings and blaming the brand of string you're using, telling the singer you're almost there, start without me, and cussing....it's Hilarious JMHO
(Posted with the utmost respect of all steel guitarist, no matter what type of steel guitar they play)
I can't for the life of me, see how someone could compare the playability of an old Emmons Push~Pull, to a modern steel guitar. But they try. Respectfully, I don't think some could actually tell the difference in sound between one steel or another. But it does prove my point. All of my keyless steels have aluminum necks. What I find entertaining with some of these post, is the lack of knowledge. So many, know so little about keyless steel guitars. Keyless steel guitars have been around longer then some that make comments about them. I won't go back to a keyed steel guitar. Yes I use to play keyed steel guitars, I can't stand those top & side heavy, awkward looking things.
b0b, it's not that some don't like the looks of a keyless, I'm actually starting to think, by reading some of these post. That a few are actually intimidated by the looks of a keyless. And the phrase "I'm too old to change" comes to mind here. So keep winding strings, cranking tuning keys, spilling the beer reaching for the wire cutters, messing with pedal tuning sleeves, breaking 3rd strings and blaming the brand of string you're using, telling the singer you're almost there, start without me, and cussing....it's Hilarious JMHO
(Posted with the utmost respect of all steel guitarist, no matter what type of steel guitar they play)
- George Redmon
- Posts: 3529
- Joined: 8 Apr 2005 12:01 am
- Rich Upright
- Posts: 1183
- Joined: 30 Sep 2014 9:55 am
- Location: Florida, USA
My observation of keyless is simply that I have never heard a keyless that I thought sounded good. Remember being at a steeljam in Watertown, Tenn. a number of years back. Remember some of the players...Buddy, Jimmy Crawford, Johnny Cox,Jeff Newman, I think Donna Hammet. Remember seeing Emmons;JCH,Zums,Franklin & they all sounded great. Jeff Newman came on to play & had a Kline, & I remember it sounding dull & lifeless as compared to the other guitars. My first steel player back in the day had a D-10 Kline, & I remember it sounding dull; no resonance. It's just a matter of personal taste. Yes; my '66 Emmons PP played clunky, but the tone was to die for. There is a reason why players pay a fortune for an old push-pull. They are like old Harleys--a mechanical, clunky nightmare, but nothing sounds better. I saw one of my top 5 favorite players in the WORLD a few months ago & thought if he were playing a keyed guitar instead of a Sierra, it woulda been phenominal. I have played Kline, Sierra & 1 other; the brand escapes me ( I think GFI), & didn't like the sound of any of them. But then again, it's all a matter of personal taste. maybe it's my playing; I have never been able to get a good sound out of a Sho-Bud, either, but I've heard Lloyd & Dickey Overbey sound better on them than a lot of players on PPs. Go figure. I will always stick with keyhead, aluminum neck guitars, because, with the exception of MSA (which to me sounds as good as a PP) or Dekley, they're the only steels I feel I sound good on.
A couple D-10s,some vintage guitars & amps, & lotsa junk in the gig bag.
-
- Posts: 3942
- Joined: 23 Dec 2005 1:01 am
- Location: Maryland, USA
I have a GFI keyless, and a couple of keyed steels.George Redmon wrote:And the phrase "I'm too old to change" comes to mind here. So keep winding strings, cranking tuning keys, spilling the beer reaching for the wire cutters, messing with pedal tuning sleeves, breaking 3rd strings and blaming the brand of string you're using, telling the singer you're almost there, start without me, and cussing....it's Hilarious :\ JMHO
(Posted with the utmost respect of all steel guitarist, no matter what type of steel guitar they play)
Turning the keyless tuning knobs by hand may take fewer turns, but I don't find it any quicker than cranking tuning keys with a peg winder. And there's no need for additional time to tighten down a screw on a keyed guitar. I don't think I'm any less likely (or more likely) to spill beer reaching for the screwdriver than reaching for the wire cutters. I take it you must be a string wiggler, i.e. wiggle the string to break it off instead of cutting it? I use wire cutters for my GFI keyless, so that's two tool reaches.
(Perhaps these points are specific to the GFI system.)
Posted with reciprocal respect.
Changing the subject slightly, I wonder whether we're taking it for granted that the reduced length of a keyless guitar is an automatic benefit.
By losing the space under the keyhead we're effectively shunting all the pedals at least one position to the right, and if you are used to a wide stance a keyless might seem cramped, especially to Emmons players.
I am pro-keyless myself for all the usual reasons, but I can see a downside if it isn't actually comfortable to play.
By losing the space under the keyhead we're effectively shunting all the pedals at least one position to the right, and if you are used to a wide stance a keyless might seem cramped, especially to Emmons players.
I am pro-keyless myself for all the usual reasons, but I can see a downside if it isn't actually comfortable to play.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs