| Author |
Topic: Help! Urgent! |
Dan Klotz
From:
Houston, Texas
|
Posted 7 Mar 2015 9:41 pm |
|
I have an early church gig in the morning. As I was practicing tonight, the 4th string wont return to pitch after using the D lever. Hitting the C pedal will bring it back to pitch. My instructor oiled it for me a while back and I haven't gotten around to getting any. Any ideas?
_________________
2- Rittenberry D10's
Quilter Steelaire. Nashville 400. Session 500 |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 7 Mar 2015 9:52 pm
|
|
| If it has adjustable return springs, tighten that one up a turn or two. If not, try swapping the spring with one from a string that doesn't lower. |
|
|
|
Dan Klotz
From:
Houston, Texas
|
Posted 7 Mar 2015 11:32 pm
|
|
Thank for the help.
A friend call me up and told me to get some M pro 7 gun oil. I oiled the finger and it working fine.
BTW- I was told early on not to oil the steel all the time because it would gunk everything up. I followed that advice and hadn't had any problems until now... I think I'll order some oil!
_________________
2- Rittenberry D10's
Quilter Steelaire. Nashville 400. Session 500 |
|
|
|
John Booth
From:
Columbus Ohio, USA
|
Posted 8 Mar 2015 4:15 am
|
|
I recommend you get a pin oiler with some Teflon in the oil.
Doesn't gum up like raw oil.
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
.................................. |
|
|
|
