| Author |
Topic: Need help with Excel |
William Morgan III
From:
Hephzibah,GA
|
Posted 23 Sep 2014 1:01 am |
|
| I am trying to locate the round barrels with the set screw that lock the changer rods to the bell cranks. They are 7/32 and the problem is I do not know what they are properly called. As I play with a prosthetic left forearm, I had to shift the pedals and knee levers to the right one pedal spacing. I want to replace the 4 threaded nylons used in lowering the Es and the Bs. Any help would sure be greatly appreciated, thanks |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 23 Sep 2014 3:37 am
|
|
Michael Yahl calls them pull pins.
I doubt they're 7/32: I bet Mitsuo uses metric.
Try Scotty's Music in St. Louis, they're an Excel dealer.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Larry Allen
From:
Kapaa, Kauai,Hawaii
|
Posted 23 Sep 2014 9:14 am Rod holders
|
|
Neither Scotty or Mitzuo have these. They are 5m metric, I got a stick of rod at the welding supply, cut, drilled and threaded them with set screws (Allen heads) on the E xcels I've rebuilt. They also came with a plastic threaded version that sucked so I replaced them also. Larry
 
_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side |
|
|
|
Alan Brookes
From:
Brummy living in Southern California
|
Posted 23 Sep 2014 9:40 am
|
|
Help with Excel ...and here I was ready to give advice on computer spreadsheets.  |
|
|
|
