Fender Stage 100

Jimmy Gibson · From: Cornwall, England

On the back of my Fender Stage 100 the extension speaker states a min of a 8 Ohms 100 watt speaker the internal speaker is 8 Ohms but I do not use the extension speaker jack, so will it be ok to replace the 8 Ohm with a 4 ohm 200 watt speaker?

Thanks Jimmy.

Stephen Cowell · From: Round Rock, Texas, USA

http://support.fender.com/manuals/guitar_amplifiers/Stage100_Stage100H_Stage160_manual.pdf

Yes, you're good to go. It'll heat up and quit if you go lower.
_________________
Too much junk to list... always getting more.

Donny Hinson · From: Glen Burnie, Md. U.S.A.

I agree, you'll be fine with a 4-ohm speaker as long as you don't try to add anything else. An added bonus is that you'll get a significant increase in output power! Very Happy

Michael Maddex · From: Northern New Mexico, USA

Stephen and Donny have it. In addition, if you do replace the existing speaker with the 4 ohm one, I would suggest disconnecting the Extension Speaker Jack at the same time just to be on the safe side.

Enjoy!
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke

Jimmy Gibson · From: Cornwall, England

Thanks guy I did it I tried it and love it the speaker I fitted is a 12Inch Black Widow and it sounds superb on steel and absolutely amazing on guitar.

Jimmy.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: