Scantic River Guitars New Build in Swamp Ash
Moderator: Brad Bechtel
-
- Posts: 40
- Joined: 30 Sep 2009 7:19 am
- Location: Massachusetts, USA
- Contact:
Scantic River Guitars New Build in Swamp Ash
Custom Build for Nashville Musician Drew Belk who plays with Billy Currington
- Mark Eaton
- Posts: 6047
- Joined: 15 Apr 2005 12:01 am
- Location: Sonoma County in The Great State Of Northern California
-
- Posts: 40
- Joined: 30 Sep 2009 7:19 am
- Location: Massachusetts, USA
- Contact:
-
- Posts: 1183
- Joined: 20 Jan 2009 5:34 pm
- Location: Philly, PA
-
- Posts: 40
- Joined: 30 Sep 2009 7:19 am
- Location: Massachusetts, USA
- Contact:
Hi Steve, Thanks. The pickups are a Lollar F-Spaced Imperial Humbucker in the neck Position and a Lollar Chicago Steel in the Bridge Position. With a blend pot in the middle of the volume and tone controls you can dial in what you like.Stephen Abruzzo wrote:Very nice. Love the swamp ash.
What kind of pups do you have in there?. Looks like an un-matched set....which can lead to some sonic fun.
- George Seymour
- Posts: 870
- Joined: 14 Nov 1999 1:01 am
- Location: Notown, Vermont, USA
- George Seymour
- Posts: 870
- Joined: 14 Nov 1999 1:01 am
- Location: Notown, Vermont, USA
- Mark Eaton
- Posts: 6047
- Joined: 15 Apr 2005 12:01 am
- Location: Sonoma County in The Great State Of Northern California
Yeah, I think they've been gone for over two years and going on three.
I had an interest in getting one built in either late 2015 or early 2016 and received an email from the company that no orders were going to be taken that year.
I contacted a couple of well known pros who played these guitars and they didn't have much information, all they'd heard was that due to some personal issues the company was temporarily shut down.
Unless someone chimes in to tell us otherwise, at this point I'm thinking "temporarily" has likely become "permanently."
I had an interest in getting one built in either late 2015 or early 2016 and received an email from the company that no orders were going to be taken that year.
I contacted a couple of well known pros who played these guitars and they didn't have much information, all they'd heard was that due to some personal issues the company was temporarily shut down.
Unless someone chimes in to tell us otherwise, at this point I'm thinking "temporarily" has likely become "permanently."
Mark
- George Seymour
- Posts: 870
- Joined: 14 Nov 1999 1:01 am
- Location: Notown, Vermont, USA
- Dustin Rhodes
- Posts: 873
- Joined: 21 Mar 2007 9:46 am
- Location: Owasso OK
- Mark van Allen
- Posts: 6378
- Joined: 26 Sep 1999 12:01 am
- Location: Watkinsville, Ga. USA
- Contact:
- George Seymour
- Posts: 870
- Joined: 14 Nov 1999 1:01 am
- Location: Notown, Vermont, USA
I would expect Creston could very easily fill the void, his work is impeccable. He may not want to though..who knows. He’s agreed to build one for me, another local steel player, Brett Lanier has one, they are pictured on the web site
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones
Old Gibson Mastertones
-
- Posts: 971
- Joined: 8 Nov 2015 3:46 pm
- Location: Crowley Louisiana, USA
Lap steel builder
I have a friend the is a luthier and can build about anything you want.
This is a swamp Ashe guitar I have someone who can supply the swamp Ashe.This guitar was built by My friend Buddy Duchamp in Lafayette, La.
He should be in the book and he definitely can be contacted on FB. Tell him Dale Foreman recommend him for the job!
Dale
This is a swamp Ashe guitar I have someone who can supply the swamp Ashe.This guitar was built by My friend Buddy Duchamp in Lafayette, La.
He should be in the book and he definitely can be contacted on FB. Tell him Dale Foreman recommend him for the job!
Dale
Last edited by Dale Foreman on 5 Feb 2018 3:09 pm, edited 1 time in total.
Rittenberry Prestige(2)
- Mark Eaton
- Posts: 6047
- Joined: 15 Apr 2005 12:01 am
- Location: Sonoma County in The Great State Of Northern California
Guys, there is no shortage of quality lap steels being built these days - on the higher end it might be on a scale of 1 to 10 some of the finest lap guitars built in history as the instrument has experienced a resurgence in recent years.
I've acquired two new and one used modern lap steel since I had an interest in the Scantic River guitar which never happened.
But I would have liked to have had a shot at getting one of these for myself, too bad they didn't make it.
Or maybe there will be a comeback at some point, you never know.
I've acquired two new and one used modern lap steel since I had an interest in the Scantic River guitar which never happened.
But I would have liked to have had a shot at getting one of these for myself, too bad they didn't make it.
Or maybe there will be a comeback at some point, you never know.
Mark
-
- Posts: 971
- Joined: 8 Nov 2015 3:46 pm
- Location: Crowley Louisiana, USA
Lap steel builder
I have a friend the is a luthier and can build about anything you want.
This is a swamp Ashe guitar I have someone who can supply the swamp Ashe.
This is a swamp Ashe guitar I have someone who can supply the swamp Ashe.
Rittenberry Prestige(2)