Cleaning Material

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
Ray Thomas
Posts: 2268
Joined: 22 Mar 2007 2:46 pm
Location: Goldsboro North Carolina

Cleaning Material

Post by Ray Thomas »

Need some recommendations on cleaning and restoring amp cabinets, just got a NV112 that really needs a good cleaning, windex looks good as long as its wet, when it drys no help, the amp works good, needs to look good, thanks for any help.
Ray Thomas
Livesteel Strings Dealer
Call 919-920-5482
Text rayssteel@gmail.com or email
User avatar
Steve Hitsman
Posts: 2039
Joined: 25 Mar 1999 1:01 am
Location: Waterloo, IL

Post by Steve Hitsman »

I would think any vinyl cleaner would work fine. There's a bunch of different brands available for car interiors.
User avatar
Dale Rottacker
Posts: 3513
Joined: 3 Aug 2010 6:49 pm
Location: Walla Walla Washington, USA
Contact:

Post by Dale Rottacker »

Someone suggested using Tire Clean, which I got in a 4 pack at Costco...you spray it on and walk away, and come back 15 minutes later to a new amp, I wiped off the excess after that and was really pleased with the result, you could even spray it on a toothbrush for those hard to get at places around the handle and in the corners...It even seems to dissolve the little fuzzy's that get caught in the grill cloth.
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
User avatar
Rick Campbell
Posts: 4283
Joined: 8 May 2006 12:01 am
Location: Sneedville, TN, USA

Post by Rick Campbell »

Ray,

This is the best stuff I've ever used. I've used it on airplanes and people would ask if I just came from the paint shop. I use it on everything. Tires, glass, dash, etc...and my amps. Just spray in on and wipe it off. It will shine like new. I used to order it, but you can now get it at Walmart..... Usually in the RV section. Regular tire shine product is sometimes sticky.. I'd test before I used that.

Image

http://www.protectall.com/


RC
Bill Fall
Posts: 283
Joined: 27 Jul 2001 12:01 am
Location: Richmond, NH, USA

Post by Bill Fall »

I just use Armorall. Gives the Tolex a nice new sheen.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Get some vinyl cleaner and a hand brush. Go over the amp an area at a time. Wipe of the schmutz off with paper towels. When it comes clean, wipe it with a damp rag. I can't stand Armor All! Too sticky/shiny. Meguiar's makes a product called "Natural Shine." It's not greezy like Armor All. Much nicer!
User avatar
Greg Cutshaw
Posts: 6610
Joined: 17 Nov 1998 1:01 am
Location: Corry, PA, USA
Contact:

Post by Greg Cutshaw »

I just did the vinyl tonneau cover on my truck. It has been impossible to clean. I tried a procedure I found on the Meguire's auto forum. Using a 3" Griot's Garage random orbital buffer with the yellow buffer foam pads and a solution of 50% isopropyl alcohol (the 70% stuff) and 50% water I came out like new despite being out in the weather for 2 years. I tried the alcohol scrubbing by hand and it was only slightly effective. The buffer made it awesome.
User avatar
Jack Stoner
Posts: 22087
Joined: 3 Dec 1999 1:01 am
Location: Kansas City, MO

Post by Jack Stoner »

When I worked as an amp tech I always cleaned the amp as part of the servicing. I used "Spray 9", a commercial cleaner similar to "409". Made them look new.
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
User avatar
Jack Hanson
Posts: 5024
Joined: 19 Jun 2012 3:42 pm
Location: San Luis Valley, USA

Post by Jack Hanson »

In one of Texas amp guru and Vintage Guitar Magazine columnist Gerald Weber's books, he explains how he cleans old tolex-covered Fender amps.

Mr. Weber recommends removing the chassis, and reverb tank if applicable, and hauling the empty cabinet down to the local self-service car wash. He first sprays it with the high-pressure hose and soapy solution, and then rinses it thoroughly. (No need to wax, apparently.)

He then sets the wet cabinet outdoors in the sunshine, for as long as it takes to allow it to air dry thoroughly.

Next, he applies a liberal dose of Armor-all, or a similar product, and allows it to dry before wiping the cabinet down and reassembling. Says it makes the tolex look as good as new.

I followed his method with my '77 Peavey LTD. 400 last summer, and he was right. It looks just like new.
Ernie Hays
Posts: 18
Joined: 2 Jan 2011 9:47 am
Location: Indiana, USA

Magic Eraser

Post by Ernie Hays »

I have been having good luck with Mr Clean Magic Eraser,that stuff really works on a lot of things.
User avatar
Dale Rottacker
Posts: 3513
Joined: 3 Aug 2010 6:49 pm
Location: Walla Walla Washington, USA
Contact:

Post by Dale Rottacker »

Rick Campbell wrote:Ray,

This is the best stuff I've ever used. I've used it on airplanes and people would ask if I just came from the paint shop. I use it on everything. Tires, glass, dash, etc...and my amps. Just spray in on and wipe it off. It will shine like new. I used to order it, but you can now get it at Walmart..... Usually in the RV section. Regular tire shine product is sometimes sticky.. I'd test before I used that.

Image

http://www.protectall.com/


RC
Rick, did you give up on the Power Wash Method, or is that reserved just for guitar's... :lol: :lol: :lol:
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
Post Reply