UPS disaster- Carter steel severely damaged - help

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

UPS disaster- Carter steel severely damaged - help

Post by John Brabant »

Hi Everyone:

I am looking for advice from any and all who have had the unfortunate experience of shipping a steel via UPS to a fellow forumite only to learn that when the steel was received, it was found to be severely damaged. I just learned by email that a mint Carter D-10 I shipped to Jack Goodson was damaged in transit. Jack emailed to me that the body was cracked and damaged on the front apron and damaged to the point where the crossrods are now falling out of their holes. I recall reading here and elsewhere that some others have had similar experiences with UPS shipments.

Please advise. I insured it for $2500, but recall that some have said that they ended up in a protracted battle with UPS to get payment out of them for damaged equipment. If there are best ways to deal with this in your experience, please advise. I feel horrible about this. If UPS screws me on this, I want to make it right for Jack, so if anyone has any advice in lieu of UPS coming thru such as where I can buy another Carter D-10 body to replace the one Jack just got handed, I would also appreciate that.

I haven't yet spoken first hand with Jack, but will this morning. Thank you all in advance for any assistance you can provide. - John
John Brabant
1978 Emmons D-10 P-P
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

A thought. Would Al Brisco have any Carter D-10 bodies in his parts inventory?

thanks again.
John Brabant
1978 Emmons D-10 P-P
David Nugent
Posts: 4817
Joined: 2 Nov 2001 1:01 am
Location: Gum Spring, Va.

Post by David Nugent »

One of the most important steps is to be certain to save all packing materials. Normally UPS will claim that the item was improperly packed thus resulting in the damage and may deny your claim if you cannot produce said materials..You might try contacting another steel guitar builder to repair or replace the damaged areas (if the guitar is ultimately returned to you, Jerry Fessenden is fairly close).
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

In a case of locking the barn door after the horse has bolted, I want to point out that Greg Cutshaw has a VERY robust packing method on his site.
Either pack to his standard, ensuring the lowest possible likelihood of damage, or take the guitar to ups or FedEx for them to pack. I have ZERO confidence in their packing, but if the carrier's agent packs it, they cannot say it was inadequately packed.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
David Wright
Posts: 5258
Joined: 4 Aug 1998 11:00 pm
Location: Pilot Point ,Tx USA.
Contact:

Post by David Wright »

Having gone thought this, do 2 things...
1. Pay UPS to pack it..
2. Insure it..

If it's the best & easiest way to get you money out of the guitar...
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

I will give Jerry a call and see what advice he can provide. Jerry is close to me, but the guitar is now in Alabama so s builder or rebuilder down there would probably e better to go to for a repair. I do not want to ship this again by UPS. I paid them $100 to ruin a beautiful instrument.

Anyone that I could contact near New Brockton, Alabama that I can contact that can fix this guitar?
John Brabant
1978 Emmons D-10 P-P
User avatar
Joe Naylor
Posts: 2711
Joined: 19 Jan 2004 1:01 am
Location: Avondale, Arizona, USA

shipping

Post by Joe Naylor »

I DO NOT USE UPS AT ALL - I know several of the steel guitar builder do not use it either.

I have used FedEx for 7 years and had one claim and not sure that was not a customer problem. However FedEx paid me in 11 days and was more than I have discussed.

The last time I used UPS was to a guy that worked for them in the Chicago area. They lost it - about a year later they found it in St. Louis ---- by that time he had been setting on the second seat I built him for several months. He even had me send the second one FedEx.

David may be right but I do not want to pay for them to pack seats every time - I shipped 12 yesterday and have no idea how long or how much on that deal.

The US Post Office is the best option for international by the way. I just shipped a seat to the UK a couple weeks ago and it arrived before the one I shipped the same day to Maine.

Good Luck with getting a settlement from UPS.

Steel Guitar of Canada does have Carter parts.

Joe Naylor
www.steelseat.com
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
User avatar
Jack Stoner
Posts: 22087
Joined: 3 Dec 1999 1:01 am
Location: Kansas City, MO

Post by Jack Stoner »

I've seen problems posted of both the major shipping companies. One will swear by one company and someone else the other company.

When I got my Franklin it was shipped by Greyhound Bus. Mr Franklin said they found that the "safest" way when he worked at Sho-Bud. Both FedEx and UPS were around back then, although FedEx was air only.

My shop (where I worked until retirement) shipped a lot of computer equipment and parts. We always "overpacked" and never had a problem. Most of it was shipped FedEx as the Federal Government Agency I worked for had a contract. I've sold a lot of items on the forum and on e-bay and have adhered to the "overpacking" and have never had a problem.
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

I had a problem with FedEx a while back. They damaged a pristine Emmons p/p in shipment.
I had it insured for $4,000 and they wouldn't do anything about it. I took them to conciliation (small claims) court and collected all I had coming including shipping expenses and court costs. The judge was very sympathetic.
User avatar
Larry Bressington
Posts: 2809
Joined: 6 Jul 2006 12:01 am
Location: Nebraska

Post by Larry Bressington »

They are most sure to start out as a 'Hard case', i'm sure they are self insured etc, and they are probably only going to pay on people like Erv who really fought the case. It shouldn't be that way, you pay 'Insurance' and they broke it...They diden't have any problem with the way it was wrapped when they took your insurance money did they??? it's 'their' problem!!
A.K.A Chappy.
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

Hi Erv:

Good advice. So the court that would have jurisdiction I would think would be the court from the state where the transaction occurred between UPS and the shipper (me, that being Vermont. I will give them a chance to do the right thing, but will take them to small claims court immediately if they don't. I will also be calling the Consumer Protection Division of the Vermont Attorney General's office at the same time. Imagine if UPS advertised, "Ship with us, but there is a decent chance that we will severely damage or destroy the item you have us ship for you and we will accept no responsibility for our actions. That will be $100.00 please." I would expect that they would go out of business. We will see.

In the meantime, I am looking for a replacement Carter D-10 body if anyone knows where I can find one or have one made.

Thank you everyone for your help on this.
John Brabant
1978 Emmons D-10 P-P
User avatar
Mike Mantey
Posts: 1308
Joined: 18 Oct 2004 12:01 am
Location: Eastern Colorado, USA
Contact:

Post by Mike Mantey »

Luck of the draw. I ship at least 2 steels a week UPS and have never had severe damage. However the damage I did have last happen to be on a carter guitar. The back rail is held on by some screws, but the rail has a slot, wish I had pics. But if it is dropped at all the back apron can slide out and therefore cross rods fall out.

My suggestion to Carter owner's (and not even sure if this is how all of them are), but drill you a hole or two in the back apron where it mounts to the c6th neck and put in a simple 1/2" screw, that way it can't slide out and drop cross rods.

If someone could snap a picture it would be worth a thousand words.

Back to the claim, we repaired the guitar and UPS paid the bill no problem.
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

Hi Mike:

I will let Jack Goodson know. From the single pic that Jack emailed to me, the aluminum back apron appears to be in place and to not have slid off from the mounting screws. Jack said that the wood body is cracked on the front apron under the formica and also on the keyhead end, where it was dropped.

If the guitar were to be re-glued, will it hold up?
John Brabant
1978 Emmons D-10 P-P
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

By the way, the Sho Bud I took in trade for the Carter was delivered today. While the steel was fine, UPS did drop this one too, breaking one of the case corner joints. I made the UPS driver wait until I finished the inspection. I will deal with gluing the case, what looks to be an easy repair.

I am not impressed with UPS, they are 0-2.
John Brabant
1978 Emmons D-10 P-P
User avatar
Mike Mantey
Posts: 1308
Joined: 18 Oct 2004 12:01 am
Location: Eastern Colorado, USA
Contact:

Post by Mike Mantey »

Yes, a cracked body can be glued to be just fine if done properly.

Yes the Carter I had damaged the case just kind of blew up, partition out quite the mess. I do believe the case has a lot to do with it.
User avatar
Erv Niehaus
Posts: 26797
Joined: 10 Aug 2001 12:01 am
Location: Litchfield, MN, USA

Post by Erv Niehaus »

My guitar was handled SO roughly that the blocks that held the guitar in place were broken loose from the case.
With FedEx, they said that I didn't buy insurance, it was declared value. That makes no sense at all as I paid extra for the insurance. When they made that statement in court, the judge said: "I'll determine that." Don't be in a hurry to find another body for the guitar, FedEx wound up with my guitar after paying me.
Tom Gorr
Posts: 2311
Joined: 12 Sep 2000 12:01 am
Location: Three Hills, Alberta

Post by Tom Gorr »

UPS should start a used parts company to go alongside their main business...
User avatar
Dave O'Brien
Posts: 1583
Joined: 23 Feb 2002 1:01 am
Location: Florida and New Jersey
Contact:

Ups

Post by Dave O'Brien »

UPS is a disaster. I bought a Fender Twin - they did their best to destroy it. 4 tubes missing except for some glass shards - looked like they had rolled it 1000 miles or towed it with a rope - the 100 lb delivery gal dumped it upside down in my driveway and left without the required signature! Never again! always ask your shipper to use fed Ex.
Dave O'Brien
Emmons D-10, CMI D-10, Fender Deluxe Reverb, PV 112, Fender Pro Reverb
www.myspace.com/daveobrienband
Bill Hatcher
Posts: 7252
Joined: 6 Nov 1998 1:01 am
Location: Atlanta Ga. USA

Post by Bill Hatcher »

i had a carter with a crack in it. john fabian offered me a replacement body...as long as it was in white! lol al might have some of those bodies in the parts stash from carter.

there used to be a place here in the atlanta area called peachtree salvage. all they sold was UPS damaged stuff. bought it from UPS by the pound in semi trucks out of some UPS place in arkansas i think. i bought some spectacular guitars from that place. all very repairable.
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

A long time ago, I worked for a company where I had to deal with delivery company reps. We had a damaged box from UPS. I called the rep and he came out to see the damage. I was told it wasn't packaged correctly and proceeded to tell me that a package needs to able to survive a drop from the back of a semi to be considered being packed correctly. What a chicken S**T explanation.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
User avatar
Sonny Jenkins
Posts: 4376
Joined: 19 Sep 2000 12:01 am
Location: Texas Masonic Retirement Center,,,Arlington Tx

Post by Sonny Jenkins »

John,,IF,,,you win a damage case,,,,then UPS would take possession of the guitar,,,if they pay for it, it's theirs,, (as in Erv's case above). If the guitar is repaired,,,and a claim is made for the cost of repair, that complicates the issue,,,,all kinds of arguments could arise out of that,,,"we could have got it done cheaper",,,,"did it really need that much repair",,,,etc,,,,. Hope you had pics of the guitar stabilized securely in the case (loose items act as a "hammer" when impacted). Their "fine print" states items must be packed to with stand a 6' (?) drop,,,as does fedex.
Ed Heins
Posts: 57
Joined: 10 Oct 2013 8:21 am
Location: Ohio, USA

Post by Ed Heins »

I ship and receive UPS often for work, and have found they can really destroy a package. If I have to ship anything sensitive, I try to put enough packing around it and secure enough to withstand a 5 ft or so direct drop on a corner. I've never seen them toss something in that manner, but I have certainly seen the results that indicate such. Man sorry to hear about the steel. That's a huge loss it seems.
Sierra S-10, GFI SM-10, Martin DM, Fender B250, Peavy Millenium, Ampeg B15N
User avatar
Per Berner
Posts: 1808
Joined: 10 Aug 2004 12:01 am
Location: Skövde, Sweden
Contact:

Post by Per Berner »

UPS never call in advance to check if someone's at home, because they do not have cell phones (!). When they deliver imported goods, they demand cash payment for import duties. Credit cards? Never heard of them... And when they take the cash, they will not give any change back. True professionals, NOT!
Tom Gorr
Posts: 2311
Joined: 12 Sep 2000 12:01 am
Location: Three Hills, Alberta

Post by Tom Gorr »

I'd ask them to round down to my nearest bill...sounds like a bit of 'gratuity is included' going on with the no change thing.
Will Cowell
Posts: 388
Joined: 23 Jan 2008 1:02 pm
Location: Cambridgeshire, UK

Post by Will Cowell »

I sympathise with Dave O'Brien, but I will always take out all vacuum tubes if shipping an amp, and pack them independently within the enclosure. They are just too vulnerable to shocks and stresses of shipment in their sockets.

Long experience with old ham radio equipment! :D
Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay
Post Reply