| Author |
Topic: Session 400 to DI question |
Paul Sutherland
From:
Placerville, California
|
Posted 23 Apr 2014 11:46 am |
|
Recently I've been running a second instrument cable from the second hole of the inputs on front, and sending the signal to a Countryman Type 85 DI box, and then patching into the house PA. It seems to work fine, and eliminates the need to put a mic on the speaker.
But I'm wondering if I might be causing problems down the road with the amp or the DI or the PA. Would using the Booster output on the back of the amp to go to the DI be any better or different?
Any comments are welcome.
_________________
It don't mean a thing if it ain't got that swing. |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 23 Apr 2014 12:35 pm
|
|
| Paul try the pre-amp out to the DI. Works good and just has the signal from the front section. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 23 Apr 2014 1:10 pm
|
|
Yeah Paul. Before I started carrying my own mic, I used a DI box and hooked it to the preamp out jack. Worked good.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 55 years and still counting. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 23 Apr 2014 8:10 pm
|
|
I'd use the booster out, so that you have your EQ
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
