"Lube" for a PsG
Moderator: Shoshanah Marohn
-
- Posts: 55
- Joined: 23 Mar 2014 8:21 am
- Location: Morrilton, AR
"Lube" for a PsG
I originally posted this question in Bernie's thread but thought better of it....forum etiquette, and all that.....
Many references were made to "lube" this or that to take care of an unwanted pedal sound. In relation to that, what lubricant, oil or whatever is typically used on a PSG?
Where and how often is it applied, if you have time to answer all this? More ignorant newbie questions.........
Many references were made to "lube" this or that to take care of an unwanted pedal sound. In relation to that, what lubricant, oil or whatever is typically used on a PSG?
Where and how often is it applied, if you have time to answer all this? More ignorant newbie questions.........
BMI S10, Beard E model reso, Gold Tone Deluxe Beard Sig. reso, Guild acoustic guitar
- Tony Glassman
- Posts: 4470
- Joined: 18 Jan 2005 1:01 am
- Location: The Great Northwest
-
- Posts: 55
- Joined: 23 Mar 2014 8:21 am
- Location: Morrilton, AR
For all the talk of high-end and alternate lubes, Zum and Franklin use light machine oil (like sewing machine or 3 in 1)and a light motor oil (I forgot to ask the grade/weight), respectively. Since cheap stuff found at O'Reilly works for two of the best guitars, I am not convinced the advantages of the others are better enough. That said, I did buy a bottle of Dupont's alternative to liquid Tri-Flow, and it worked well (and was cheaper than Tri-Flow)
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
- Greg Cutshaw
- Posts: 6610
- Joined: 17 Nov 1998 1:01 am
- Location: Corry, PA, USA
- Contact:
Not every manufacturer is an expert in lubes. I've had two brand new guitars that were a bit stiff and had some binding. I think they were both dry and had no detectable lube. Applying Tri_Flo made them work super easy. Of course applying ANY lube to a dry guitar helps but I've used Tri-Flow all over the house and even over time it does not seem to attract dirt and sludge up.
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
Another newbie question, expanding the original a bit (hopefully, this isn't in bad form?)
I completed disassembling and cleaning of my E9 changer, and have been reading the numerous threads concerning lubrication. My question is have any of you experienced a break-down on nylon/plastic parts from prolonged contact with petroleum-based lubricants?
I completed disassembling and cleaning of my E9 changer, and have been reading the numerous threads concerning lubrication. My question is have any of you experienced a break-down on nylon/plastic parts from prolonged contact with petroleum-based lubricants?
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
If you are referring to nylon bushings and the like, they do not need lube, they are the lube...
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
- Greg Cutshaw
- Posts: 6610
- Joined: 17 Nov 1998 1:01 am
- Location: Corry, PA, USA
- Contact:
-
- Posts: 1153
- Joined: 3 Apr 2006 12:01 am
- Location: Illinois, USA
I listen to Marcia Campbell's all-night truckers' show on WSM sometimes, and one of her sponsors is Motor-Kote....a hyper-lubricant you add to oil, or use as is. The jury is still out, as I just started using it experimentally. It appears to work better than gun oil which surprises me. What's also neat about the stuff is that it can be mixed WITH the gun oil to enhance its properties. It can be found at all Walmart stores on a bottom shelf in the automotive section. I paid 27 bucks for a quart...sounds bad, but in checking the comparable price of most gun oils per ounce, Motor-Kote is definitely cheaper. Buy a quart and divide it up among fellow steel players....or put the rest in your car engine.
PRR
PRR
Substitute for Tri-Flow?
I wasn't able to find any Tri-Flow available in Leavenworth, Kansas. So I went out on a limb and tried a substitute dry-lube, teflon-based gun oil - Remington Rem- Drilube
So far, it seems to be working fine. And I like the fact that the dry nature of it doesn't seem to attract dust/lint/crud. Hopefully, there won't be some unforeseen (by me), disastrous consequence that destroys my changer and dooms me to eternal regret. Just kidding.
So far, it seems to be working fine. And I like the fact that the dry nature of it doesn't seem to attract dust/lint/crud. Hopefully, there won't be some unforeseen (by me), disastrous consequence that destroys my changer and dooms me to eternal regret. Just kidding.
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 3911
- Joined: 18 Mar 1999 1:01 am
- Location: MINNESOTA (deceased)
-
- Posts: 784
- Joined: 18 Dec 2010 12:32 pm
- Location: Wisconsin, USA
- David Bolin
- Posts: 128
- Joined: 10 May 2007 6:48 am
- Location: Harrisburg, Illinois, USA
-
- Posts: 1153
- Joined: 3 Apr 2006 12:01 am
- Location: Illinois, USA
The solvents and diluents are flammable....the remaining lubricant is not. TFE and PTFE are one of the only common polymers that don't have a melting point which is why you'll never see a molded part made of Teflon. However, when used as an additive in another polymer, it will flow....Teflon-filled Delrin and Teflon-filled nylon are just two common examples of adding Teflon to another resin. When Teflon does reach what would be its melting point, it burns. So does PVC and CPVC better known as vinyl. Fireproof Christmas trees and decorations are made of this stuff. You can hold a flame to it and it will burn. Remove the source and the flame goes out immediately.
PRR
PRR
- Damir Besic
- Posts: 12261
- Joined: 30 Oct 2000 1:01 am
- Location: Nashville,TN.
- Contact: