Still having seating problems
Moderator: Shoshanah Marohn
-
- Posts: 1011
- Joined: 17 Mar 2013 9:06 am
- Location: Meridian, Mississippi, USA - Home of Peavey!
Still having seating problems
I have been having a hard time finding a seat of the right height for my steel and my height. I recently bought an adjustable keyboard bench which adjusts to the right height, but if I sit on it for any length of time my back kills me. I know a pack a seat would be a good solution but to be honest, I'm not traveling with the guitar at this time, and the pack a seat is somewhat pricey and takes a lot of room in the house. I have a regular office chair (no arms) that is comfortable but too short, so today I went by a local carpet store and picked up some outdated carpet sample pads to use as a cushion as suggested by someone here on that forum...hope that works or I might have to find a good chiropractor.
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal.
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
Here's my suggestions....
Jim, first, be sure you're seating posture is good...legs and torso at 90 degree angle, back straight, arms relaxed, and bent at approximately 90 degrees when hands are in playing position. Your seat height should help make the above possible. And, don't start to slouch while concentrating on playing.....that's my problem...and it will cause back pain pretty quick.
If none of this helps, you might try some exercises to strengthen your back and abdomen muscles.
Jim, first, be sure you're seating posture is good...legs and torso at 90 degree angle, back straight, arms relaxed, and bent at approximately 90 degrees when hands are in playing position. Your seat height should help make the above possible. And, don't start to slouch while concentrating on playing.....that's my problem...and it will cause back pain pretty quick.
If none of this helps, you might try some exercises to strengthen your back and abdomen muscles.
Best regards,
Mike
Mike
- Mike Dunlap
- Posts: 26
- Joined: 3 Sep 2013 12:51 pm
- Location: Robinson,Illinois, USA
i just play around the house but i went to Goodwill and bought a used shower chair for assisting physically challenged people for $2.50. it has adjustable lightweight legs and plastic seat which i put a cheap pad on. it is light weight and adjustable and quite comfortable. Was it worth the $2.50 to me...you bet. Im sure there will be many other choices but it works great for me.
-
- Posts: 55
- Joined: 23 Mar 2014 8:21 am
- Location: Morrilton, AR
I'm just playing on a stool from my shop and it's a little high, I think. But since you said this...there's one of these in our outbuilding from when my wife broke her ankle. Brilliant! I'm checking it out tomorrow. Thanks, Mike!Mike Dunlap wrote:i just play around the house but i went to Goodwill and bought a used shower chair for assisting physically challenged people for $2.50. it has adjustable lightweight legs and plastic seat which i put a cheap pad on. it is light weight and adjustable and quite comfortable. Was it worth the $2.50 to me...you bet. Im sure there will be many other choices but it works great for me.
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
Speaking of the shower chair, here's one with the "sidecar"...
![Image](http://bb.steelguitarforum.com/userpix1205/13112_steelseat_1.jpg)
Seriously, seat height makes a huge difference. My hips start hurting after 30 minutes of playing, and I have discovered my seat is about 2 inches too high. Going to do some "adjusting" today...
![Image](http://bb.steelguitarforum.com/userpix1205/13112_steelseat_1.jpg)
Seriously, seat height makes a huge difference. My hips start hurting after 30 minutes of playing, and I have discovered my seat is about 2 inches too high. Going to do some "adjusting" today...
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
- Steve Perry
- Posts: 140
- Joined: 26 Jul 2010 9:48 am
- Location: Elizabethtown Ky, USA
I'm a new player. I've only been playing a couple of months. I started using an adjustable barstool that I had been using for lap steel, but it was about 2 inches to high for the pedal steel. I then went to a kitchen chair with a couple of seat cushions. That got me at a better height, but it still wasn't ideal. I finally invested in a used pac-a-seat and that made all the difference in the world. The first time I sat on it behind the steel the pedals, knees, hands all fell into place and things I was struggling with became much easier to achieve. It's worth the investment in the right equipment. Keep an eye on the for sale forum and you will see a used seat come up fairly often. One hint.... If you see one come up that you like, jump on it quick. They don't last long around here.
-
- Posts: 103
- Joined: 13 Jan 2010 3:34 pm
- Location: Ontario, Canada
- Contact:
- Joe Naylor
- Posts: 2711
- Joined: 19 Jan 2004 1:01 am
- Location: Avondale, Arizona, USA
several models
Jim I make steelseat to any height you want - I have an option of adjustable height legs that will adjust 1 3/4" max.
The adjustable cross brace type have a large difference in the holes do not adjust very exact.
![Image](http://bb.steelguitarforum.com/userpix1205/3918_Many_Options_3.jpg)
Joe Naylor
480-215-8853 email joe.naylor@att.net
www.steelseat.com
The adjustable cross brace type have a large difference in the holes do not adjust very exact.
![Image](http://bb.steelguitarforum.com/userpix1205/3918_Many_Options_3.jpg)
Joe Naylor
480-215-8853 email joe.naylor@att.net
www.steelseat.com
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
Update on my seat, lowered it 1-1/2" and added 1" of padding to the seat. Feels mucho bettero.
![Image](http://bb.steelguitarforum.com/userpix1205/13112_seat032014_1.jpg)
![Image](http://bb.steelguitarforum.com/userpix1205/13112_seat032014_1.jpg)
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
- Mike Dunlap
- Posts: 26
- Joined: 3 Sep 2013 12:51 pm
- Location: Robinson,Illinois, USA
Larry, you will be patting yourself on the back and your wife will be so impressed how much you saved that she might just let you take her out to dinner and a movie with the money you saved.. Scott...You catch on quick..that model you have is the deluxe model and for the dedicated player..i hope you don't have it set up in front of the front picture window... ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-
- Posts: 55
- Joined: 23 Mar 2014 8:21 am
- Location: Morrilton, AR
Heck, I just took her to McDonalds yesterday! I'm gonna give it a few days....don't want to spoil her.Mike Dunlap wrote:Larry, you will be patting yourself on the back and your wife will be so impressed how much you saved that she might just let you take her out to dinner and a movie with the money you saved.. Scott...You catch on quick..that model you have is the deluxe model and for the dedicated player..i hope you don't have it set up in front of the front picture window...
![Smile :)](./images/smilies/icon_smile.gif)
BMI S10, Beard E model reso, Gold Tone Deluxe Beard Sig. reso, Guild acoustic guitar
- Kevin Mincke
- Posts: 3093
- Joined: 27 Dec 1998 1:01 am
- Location: Farmington, MN (Twin Cities-South Metro) USA
- Contact: