What amp you guys use for the pedal steel?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Locked
Raj Natarajan
Posts: 20
Joined: 19 Jun 2003 12:01 am
Location: Spring, Texas, USA

What amp you guys use for the pedal steel?

Post by Raj Natarajan »

Guys,
Is there a significant difference in the quality of tone between Peavey Nashville 400 and Nashville 1000? I recall someone telling me that Nashville 1000 has more of a tube sound. Is that really true? I have a Nashville 400, do I need to eventually trade this in for a 1000. Of course, 1000 perhaps will have a lot more volume. Any other popular ones out there? From time to time, I use a my Hiwatt DR-103, it is just different than the Peavey Nashville. Matter of fact, it is quite different. Please share your wisdom. TIA
Sidney Malone
Posts: 573
Joined: 15 Nov 2000 1:01 am
Location: Buna, TX

Post by Sidney Malone »

The Peavey amps are very popular and dependable, great company!!

My personal favorite is the Walker Stereo Steel, it's just the one that works for me!! I've tried several different amps and when I tried the Stereo Steel I knew that was it for me.

You'll probably be like the rest of us need and to try many different amps to find the one that works for you.

Good Luck!!
Rick Collins
Posts: 6006
Joined: 18 May 2000 12:01 am
Location: Claremont , CA USA

Post by Rick Collins »

...Webb
Stephen Gambrell
Posts: 6870
Joined: 20 Apr 2002 12:01 am
Location: Over there

Post by Stephen Gambrell »

Either a Twin Reverb with EV's, or a Traynor YCV80Q, with 4-10's. Tubes!!
User avatar
Brett Day
Posts: 5041
Joined: 17 Jun 2000 12:01 am
Location: Pickens, SC
Contact:

Post by Brett Day »

I use a Peavey Rage 108 amplifier and it can be plugged into any instrument. It is a small amplifier. I use it as a practice amplifier. Brett Day, Emmons S-10, Morrell lapsteel
User avatar
Bob Knight
Posts: 5096
Joined: 4 Aug 1998 11:00 pm
Location: Bowling Green KY

Post by Bob Knight »

The Peavey units are not to be surpassed by the high priced combos, fad rack units or the "holy grail vintage" tube amps.Peavey has invested 30 years ++ in the Steel Guitar market and their products,dedication and SERVICE is unequalled!!!!!!!!! There is no need to look further, people tend to think because an amp costs more or so and so plays it, it's better. NOT!!

Sincerely,
Bob Image
Session 500
2-Nashville 400
Session 400 Ltd.
DPC 1000
ProFex II
Nashville 400 DUAL Preamp.
Peavey Nasville 112 Speakers w/1203-4 Black Widows<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Bob Knight on 13 November 2003 at 05:57 PM.]</p></FONT>
User avatar
David Doggett
Posts: 8088
Joined: 20 Aug 2002 12:01 am
Location: Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)

Post by David Doggett »

Raj, I have a NV 400 and it sounds as good or better to me than the NV 1000s I have heard. They are both solid state and sound solid state. Other than having a little more power, the NV 1000 has a kevlar speaker cone, instead of the paper cone of the NV 400. Some people who switched to the NV 1000 posted on the Forum that they had trouble dialing out the midrangey sound, which I suspect was due to the kevlar cone. Somewhere I read that even though the paper cone sounds a little better, Peavey switched to the kevlar cone because it handles the higher volume better, especially distortion effects. These latter might be reasons to consider moving to the 1000, but I don't think you should expect dramatically better sound.
User avatar
chas smith
Posts: 5043
Joined: 28 Feb 2001 1:01 am
Location: Encino, CA, USA

Post by chas smith »

Sho-Bud
Standel
Evans
THD
MosValve
depending on the venue.
User avatar
Bob Knight
Posts: 5096
Joined: 4 Aug 1998 11:00 pm
Location: Bowling Green KY

Post by Bob Knight »

For Nash. 1000
Try 1-2 O'clock BASS
9 O'clock MID(corrected as per Randy Image)
11- 1 O'clock HIGH
800-850 SHIFT
PRES to taste.

Let us know your opinion on these settings.

Bob Image<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Bob Knight on 13 November 2003 at 06:04 PM.]</p></FONT>
User avatar
Michael Holland
Posts: 1297
Joined: 4 Oct 2002 12:01 am
Location: Nashville, Tennessee, USA

Post by Michael Holland »

User avatar
Randy Wade
Posts: 110
Joined: 10 Nov 2003 1:01 am
Location: Batesville, Arkansas, USA

Post by Randy Wade »

3 o'clock is a bit too much mid for me, I would suggest 9 o'clock, for my steels anyway.
User avatar
Bob Knight
Posts: 5096
Joined: 4 Aug 1998 11:00 pm
Location: Bowling Green KY

Post by Bob Knight »

Randy,
I stand corrected,You are absolutely correct! I must be lexdysec??
Image Image Image
David Cobb
Posts: 1545
Joined: 15 Oct 2002 12:01 am
Location: Chanute, Kansas, USA

Post by David Cobb »

Don't pitch the NV400 for a 1000 without doing a comparison first.
The 1000 does not have a tube sound.
Both have more power than you will likely need.<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by David Cobb on 13 November 2003 at 07:07 PM.]</p></FONT>
jay thompson
Posts: 1403
Joined: 4 Aug 1998 11:00 pm
Location: east peoria, il USA

Post by jay thompson »

Peavey TransTube Fex's, Peavey DPC 750's, Custom Peavey BW 12's, and 15's. Can't beat Peavey stereo systems.
Regards,
Jay Thompson
Jeff A. Smith
Posts: 807
Joined: 14 Feb 2001 1:01 am
Location: Angola,Ind. U.S.A.

Post by Jeff A. Smith »

There's a modification that Peavey markets for older (I forget before which year, sometime in the 80's) Nashville 400's. After this particular year, the Nashville 400 had the mod's circuitry already installed. The Nashville 1000's also include either the same circuitry, or something similar.

The Peavey mod, or another one made by LeMay, are installed for tonal reasons, and generally are thought to be an improvement over the non-modded Nashville 400.

It might be good if you knew if your 400 has the mod or not. If the serial number is past a certain digit (a search would probably reveal what digit), then your 400 has the mod. Or, if it is an older 400, (like mine), it may have had the mod installed after market.

Personally, if I didn't feel my sound was lacking something, I wouldn't worry about upgrading. The opinions of others about what amp someone "has to" have only have so much worth.
David Deratany
Posts: 205
Joined: 20 Feb 2001 1:01 am
Location: Cape Cod Massachusetts

Post by David Deratany »

I had a pair of Nashville 400's I used for years. I can't fault them. Great sound, plenty of power, reliable. But they kept putting on weight. Image Carrying two at once became a problem, then carrying one at a time became a problem. So.........I got one of Gerry Walker's Stereo Steel Amps. I sure like it; it is in three pieces, all weighing around thirty pounds each. For me it was a win/win situation.

I played a 29 performance run of the "Always, Patsy Cline" show with a 1963 Maggie (Magnatone 440). It was one of those gigs where if you could hear yourself you were too loud. I brought the SS to the first practice, tho, to establish some ground rules Image<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by David Deratany on 13 November 2003 at 08:37 PM.]</p></FONT>
john buffington
Posts: 1680
Joined: 9 Oct 1999 12:01 am
Location: Owasso OK - USA

Post by john buffington »

Webb exclusively.

Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

Webb
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

Moved to 'Electronics' section.
Locked