Help? c6 8 string beginner

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Post Reply
User avatar
Julian Davis
Posts: 28
Joined: 16 Feb 2014 10:10 am
Location: Pittsburg Kansas, USA

Help? c6 8 string beginner

Post by Julian Davis »

Hi Guys, I'm new here. it's probably been asked a million times but I just need to ask again.. I Need advice on learning an 8 string lap steel. I've been a guitar player for about years and know my chops. I've dabbled with steel and can finger pick it flatpick it, and make some chord shapes. but what is your guy's opinion on me learning, I really want it to be c6 cause that's the sound.. but if there is a random c13 video or book. that would be better. thank you ~~Julian~~
I have the right to bare a Guit steel.
Stephen Baker
Posts: 119
Joined: 27 Aug 2009 3:07 pm
Location: Lancashire, UK

Post by Stephen Baker »

It depends in the style of music you want to play but, just going off your photo, stick with C6 and get Cindy Cashdollar’s Western Swing steel guitar DVDs. Steve
User avatar
Mike Neer
Posts: 10990
Joined: 9 Dec 2002 1:01 am
Location: NJ
Contact:

Post by Mike Neer »

Seeing that you like Junior Brown, you might enjoy learning this tune by Buddy Charleton that Junior plays. Follow the link in the info section of the video for the tab.

http://www.youtube.com/watch?v=0E3KTNIzzYs
User avatar
Julian Davis
Posts: 28
Joined: 16 Feb 2014 10:10 am
Location: Pittsburg Kansas, USA

Post by Julian Davis »

thanks a bunch guys!
I have the right to bare a Guit steel.
Jim Williams
Posts: 1011
Joined: 17 Mar 2013 9:06 am
Location: Meridian, Mississippi, USA - Home of Peavey!

Post by Jim Williams »

C6 is a great tuning. Forumite Doug Beaumier has two great c6 song books with audio CDs available at www.play steelguitar.com. They are for six string but would be fine on you 8 string upper strings (c e g a c e) of course. Honestly they have been the most helpful thing for me getting started, but I do play several other instruments. Someone totally new would probably want a more from the ground up approach. The Mel Bay -Dewitt Scott course would be good for this as is the Cindy Cashdollar material that Steven mentioned. You will find most beginner material to be for 6 string C6 so it wouldn't hurt to consider starting with six and working into the 8 string as you advance. I've been playing for almost a year now and am just beginning to get the itch for the other two strings.
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal.
User avatar
Paul Seager
Posts: 424
Joined: 20 Aug 2010 7:41 am
Location: Augsburg, Germany

Post by Paul Seager »

I'll second Cindy Cashdollar's DVD's. They are not for absolute beginners but if you're musical, hold the bar and picks correctly, you've got all you need to appreciate these recordings. Honestly they're the only dedicated training DVDs for the 8 string C6 that are easily available particularly outside of the US.

The structure is good, booklet well laid out. Lots of tips about soloing and fills, all in small snippets. I've never tried Dobro but if I ever do, I'll buy Cindy's Dobro dvds on the strength of her Steel course.

Rick Alexander's YouTube site has soom good material but they're not structured educationally, more like looking over the shoulder of a great player. Mike Neer and Doug Beaumier are also on YT and ready to take you to the next level - usually on 8 string too.

\ paul
Stephen Baker
Posts: 119
Joined: 27 Aug 2009 3:07 pm
Location: Lancashire, UK

Post by Stephen Baker »

I’d also recommend you check out Troy Brenningmeyer’s C6 basics lessons. Check out his samples on youtube. Steve
Jim Williams
Posts: 1011
Joined: 17 Mar 2013 9:06 am
Location: Meridian, Mississippi, USA - Home of Peavey!

Post by Jim Williams »

Yes I forgot about Troy...very good material available in bite sized pieces.
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal.
User avatar
Papa Joe Pollick
Posts: 1968
Joined: 4 Mar 2005 1:01 am
Location: Swanton, Ohio

Post by Papa Joe Pollick »

Cindy Cashdollar. DVDs...Great lesson material..I've learned a lot from them..
User avatar
Adam Nero
Posts: 289
Joined: 17 Nov 2013 10:14 pm
Location: Wisconsin

Post by Adam Nero »

gonna get on the cindy cashdollar bandwagon with the rest. steel is not my first instrument, i understand theory. bought my d-8 last november and i've just been getting basic technique, licks, and a few songs under my belt.

today, i finally ponied up the money for the cashdollar homespun lessons and i'm already thinking about the steel completely differently.

she spends some time on the very very basics before diving into playing, which i found helpful.

also, it's now available via digital download for cheaper. homespun has a really awkward digital interface through which you initially view the content, but if you download the material and print the tab, it's just fine.

10/10, highly recommended.
User avatar
Adam Nero
Posts: 289
Joined: 17 Nov 2013 10:14 pm
Location: Wisconsin

Post by Adam Nero »

Stephen Baker wrote:I’d also recommend you check out Troy Brenningmeyer’s C6 basics lessons. Check out his samples on youtube. Steve
i've also bought a couple of his lessons. the dobro material is quite good, but i found the steel stuff kind of lacking. you can tell his heart is more with the dobro, imho.

i would recommend his c6 material to the absolute beginner. he's very good at breaking it down, whereas cindy seems to assume more of you.
Post Reply