A Poor Man's Stringmaster - Guyatone D-8
Moderator: Brad Bechtel
-
- Posts: 1075
- Joined: 10 Nov 2006 1:01 am
- Location: Massachusetts, USA
Doug , you are truly blessed !!!
Congrats Doug , the Gods have not only given you extreme natural talent but also dropped that beautiful Guya D-8 steel into your lap !!! & God bless your wonderful friend !!! I wish I lived closer so I could see and play that guitar !! Good luck with everything in your future !! -- I was very happy with my D-8 DW-16 Rick till I saw your Guya !!! the olde geezer - AKA Eddie "C"
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
Thanks Eddie! I saw and heard your Rick D-8 at the Rhode Island steel show a few years ago and it's a beautiful guitar. Those guitars have a unique sound, very warm. A lot of players like them more than the Stringmasters. I remember you had a very rare changer mechanism on yours. Something like the Rowe Stringtone, but bigger and more complex, as I remember. Cheers... GO SOX!
-
- Posts: 98
- Joined: 9 May 2013 11:19 am
- Location: United Kingdom
Hi,Brad Bechtel wrote:John, it sounds as if you're prepared for the worst instead of expecting the best. Wait until you have the instrument in hand and have played it a while before deciding whether to upgrade or replace any part of the instrument.
All seems well with the Lap Steel.I'm really impressed. The pots both work despite being bent!!!. I think it is caused by the legs.bumping the guitar in the case. I will try and get my tech to carefully straighten them, because they seem like good pots, gradually increase in volume on the volume pot, not nothing till 8 then everything to 10, and the tone control actually has an effect on tone! A bit scratchy on the tone, but nothing a small terminal cleaner spray wont fix. The knobs will have to go though, no slot locator and loose. The thing sustains for ever. Nice stable string platform, I like them pretty tight. Tuned to slack G DGDGBD. Don't think one of the pickups is reverse wound hum cancelling, because there is some hum, but only really a problem at full volume. The only thing I do not like is the switch arrangement. Looks like the pots are only on or soft, but there is no off. I might add a switch, Anyhoo, really just wanted to say all was well and should be good when I really get down to a good cleaning. Need to make a case though, stop those legs moving about in the soft case. Plenty of small dings, but shows a history, however the zip of the really tightly shaped case has formed a zipper mark in one corner. I'm well pleased. It is much heavier than I tought it would be.
Somebody please correctly explain the switch set up, and a manual would be handy.
Cheers.
Guyatone HG-91, Fender Hot Rod Deluxe, Ernie Ball Jr volume pedal.
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
John, glad to hear that you got the Guyatone and you like it. What you have is basically a copy or a "reinterpretation" of a Fender Deluxe 6. I had one of those about a dozen years ago. A nice sounding guitar with a very cutting tone. I played it on a few of my gigs and it played very well. The switches seem to be the weak link in those guitars. They're kind of light-duty, kind of flimsy. As I remember they are just on/off switches for each pickup. If they are not working properly try lifting the switch plate and spray some cleaner on the underside of the switches and flick them back and forth about 50 times. That usually does wonders!
The soft case is not original. It's too bad the seller didn't wrap the legs in bubble wrap to keep them from scratching the body. Regarding the "bent" pots...? If you mean that the shafts are bent, I wouldn't try to straighten them. They might snap off or you might otherwise damage the pot. If it works I'd say leave it as is. Enjoy your Guyatone!
The soft case is not original. It's too bad the seller didn't wrap the legs in bubble wrap to keep them from scratching the body. Regarding the "bent" pots...? If you mean that the shafts are bent, I wouldn't try to straighten them. They might snap off or you might otherwise damage the pot. If it works I'd say leave it as is. Enjoy your Guyatone!
-
- Posts: 98
- Joined: 9 May 2013 11:19 am
- Location: United Kingdom
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
-
- Posts: 1161
- Joined: 16 Dec 2003 1:01 am
- Location: Covington, Georgia, USA
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- Alan Brookes
- Posts: 13218
- Joined: 29 Mar 2006 1:01 am
- Location: Brummy living in Southern California
Me too. I have wide fingers and, to me, the spacing of strings on most steel guitars, especially pedal steels, could do with being wider. According to an earlier post from Buddy Emmons, that came about when they switched from 8-string to 10-string pedal steels and decided to keep using the same neck width.
I have the same problem on regular guitar. I wish they would build Jumbos and Solid Electrics with classical-width fingerboards. I think I'll build one. The solution I've used so far I got from Chet Atkins; a classical guitar with a piazzo pickup played through an amplifier.
I have the same problem on regular guitar. I wish they would build Jumbos and Solid Electrics with classical-width fingerboards. I think I'll build one. The solution I've used so far I got from Chet Atkins; a classical guitar with a piazzo pickup played through an amplifier.
-
- Posts: 1183
- Joined: 20 Jan 2009 5:34 pm
- Location: Philly, PA
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
Gary, it's 3/8" at the bridge and very slightly under 3/8" at the nut. There is no noticeable taper from bridge to nut. It's very comfortable for bar slants. When I went from my D-8 Guyatone to a Stringmaster I was surprised at how close the strings were at the nut on the Stringmaster. Eventually I got used to it though.
Stephen, the tuning is C6 (with high G). That's my favorite tuning nowadays, and that tuning was on the guitar when it arrived! So it was just plug in and play. I'll probably do a video with this guitar in the future. I have some other projects to finish up and I'd also like to record a video with the D-8 G'tone I recently acquired. So many guitars, so little time.
Stephen, the tuning is C6 (with high G). That's my favorite tuning nowadays, and that tuning was on the guitar when it arrived! So it was just plug in and play. I'll probably do a video with this guitar in the future. I have some other projects to finish up and I'd also like to record a video with the D-8 G'tone I recently acquired. So many guitars, so little time.
-
- Posts: 98
- Joined: 9 May 2013 11:19 am
- Location: United Kingdom
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
-
- Posts: 1183
- Joined: 20 Jan 2009 5:34 pm
- Location: Philly, PA
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- Alan Brookes
- Posts: 13218
- Joined: 29 Mar 2006 1:01 am
- Location: Brummy living in Southern California
Some guitar seem to lose steam in the upper register but this retains its sparkle (in no small part due to Doug's impeccable technique).
Steel Guitar Books! Website: www.volkmediabooks.com
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- C. E. Jackson
- Posts: 1033
- Joined: 8 Feb 2008 2:45 pm
- Contact:
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
Thanks C.E., the video is on the Guyatone facebook page now --> Click
- Alan Brookes
- Posts: 13218
- Joined: 29 Mar 2006 1:01 am
- Location: Brummy living in Southern California
I didn't even know there was a Guyatone Facebook page.Doug Beaumier wrote:...the video is on the Guyatone Facebook page now.
https://www.facebook.com/Guyatone
Last edited by Alan Brookes on 17 Dec 2013 10:29 pm, edited 1 time in total.
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
-
- Posts: 1011
- Joined: 17 Mar 2013 9:06 am
- Location: Meridian, Mississippi, USA - Home of Peavey!
Non foil Pickups...older or newer?
I'm strongly considering buying a six string guyatone but it has some differences than the 8 string has above. It does not have the gold foil type pickups, or if it does it has a cover over them or something. The pickups have squares underneath each string.
Also the fret markers are roman numeral type and not the Guyatone "G"
Is this likely older or newer than Doug's? Would sound be as good? (Considering I can't play anything like Doug
Also the fret markers are roman numeral type and not the Guyatone "G"
Is this likely older or newer than Doug's? Would sound be as good? (Considering I can't play anything like Doug
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal.