MSA - Refinishing the pedals

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
Steve Miller
Posts: 97
Joined: 31 Dec 2001 1:01 am
Location: Long Beach, CA, USA

MSA - Refinishing the pedals

Post by Steve Miller »

I want to re-paint the pedals on my old MSA. They have some kind of textured black finish. I was wondering if anyone knows what it is and/or where to get it.

Thanks
User avatar
Jerry Roller
Posts: 10319
Joined: 17 Apr 1999 12:01 am
Location: Van Buren, Arkansas USA
Contact:

Post by Jerry Roller »

Steve, I probably should leave this question to Maurice or someone closer to MSA but I know when I used to help with the earliest
Pedalmaster guitars, we used a krinkle paint purchased at paint stores. It was in a spray aerosol can. We painted them then put them in a heated oven. The heat activated the krinkle to take place.
Jerry
User avatar
Mark Herrick
Posts: 1154
Joined: 4 Aug 1998 11:00 pm
Location: Bakersfield, CA

Post by Mark Herrick »

There is another paint, not the "krinkle kote" type, called Hammerite, I believe.

It produces a kind of mottled, but semi-gloss, finish that seems to be very tough. I've seen it in black, silver and bronze colors. It might look really cool in black...

Forgot to mention, check a good industrial hardware store.<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Mark Herrick on 23 July 2003 at 08:50 AM.]</p></FONT>
Reece Anderson
Posts: 2218
Joined: 21 Jun 1999 12:01 am
Location: Keller Texas USA, R.I.P.

Post by Reece Anderson »

I have responded by personal email to Mr. Miller.
Steve Miller
Posts: 97
Joined: 31 Dec 2001 1:01 am
Location: Long Beach, CA, USA

Post by Steve Miller »

Thanks to all. You can close this now if you like.
Donny Hinson
Posts: 21192
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.

Post by Donny Hinson »

Most of the time, the crinkle paint just chips off in places. To do the job right, you have to remove all the old paint, and then re-apply new crinkle paint, and bake them. (lotta work.)

A fast "repair" is to get a bottle of black auto touch-up, and dab it on where they're chipped. Do this a couple of times, and then wait for the last coat to almost dry. Then just "dab" where you've touched-up firmly with a sponge. The impression of the sponge in the (still-soft) paint will do a pretty good job of matching the original "crinkle". Then, a thin all-over mist coat with semi-gloss paint will make them look like new!
Steve Miller
Posts: 97
Joined: 31 Dec 2001 1:01 am
Location: Long Beach, CA, USA

Post by Steve Miller »

I soaked them in lacquer thinner and then used a small wire brush. Then I sprayed on a coat of XIM Primer. Next comes the krinkle paint (2 coats), then the oven. But how long should I bake it and at what temperature? Thanks,Steve
Post Reply