Bob closer up I'm going to keep her

Joey Andrews · Post by **Joey Andrews** » 16 Sep 2013 9:19 am

Please close

Ryan Dyck · Post by **Ryan Dyck** » 16 Sep 2013 9:50 am

could you send or post a copedent chart?

Joey Andrews · Post by **Joey Andrews** » 16 Sep 2013 2:36 pm

Ryan PM sent

John Sluszny · Post by **John Sluszny** » 16 Sep 2013 3:07 pm

Ryan Dyck wrote:could you send or post a copedent chart?

Yes,me too !Thanks.

Joey Andrews · Post by **Joey Andrews** » 16 Sep 2013 4:28 pm

John PM sent

Joey Andrews · Post by **Joey Andrews** » 18 Sep 2013 2:35 pm

price reduce

Nicholas Ackron · Post by **Nicholas Ackron** » 19 Sep 2013 12:44 pm

PM sent

Tony Askins · Post by **Tony Askins** » 19 Sep 2013 3:50 pm

So, it looks like this is not set up as a universal? And if not could it be?

Joey Andrews · Post by **Joey Andrews** » 20 Sep 2013 12:25 pm

Joey Andrews · Post by **Joey Andrews** » 20 Sep 2013 4:21 pm

Final deduction Shipped lower 48 US only

Michael Strauss · Post by **Michael Strauss** » 21 Sep 2013 1:52 pm

Please forgive my ignorance, but how hard is it to change the copendent to U12?
Thanks, Michael

Joey Andrews · Post by **Joey Andrews** » 21 Sep 2013 3:22 pm

Michael sent you a PM. Joey

Lane Gray · Post by **Lane Gray** » 22 Sep 2013 9:12 am

Michael, the MSA is among the easiest for novices to tinker on. If he still has all the bellcranks and rods, it's a cinch.
If it needs hardware, Jim Palenscar or Tom Bradshaw have parts (and Michael Yahl will too, once he's open again). And the crossrods and bellcranks probably didn't get removed, since that's a bit of a pain (and not worth the effort if you just want the pedals to stop working).

Andy DePaule · Post by **Andy DePaule** » 22 Sep 2013 9:35 am

If Michael needs a Universal 12 at a good price you'd be hard pressed to get a better deal than this.
Plus it has an extra pedal for a universal tuning.
One grand to your door... Why wait?

Joey Andrews · Post by **Joey Andrews** » 22 Sep 2013 9:55 am

Thanks Lane & Andy for the good words about this guitar. Joey

Lee Dassow · Post by **Lee Dassow** » 22 Sep 2013 1:31 pm

Hi Joseph, I'm very interested in this guitar, Just need to ask you some questions. If you still have it send me a private message with your phone number. Tennessee Lee

Michael Strauss · Post by **Michael Strauss** » 22 Sep 2013 1:49 pm

I'm close. I've sent a Pm and email to Jim to get the cost of getting conversion units installed to get the triple raise on 5 & 6 (thanks Mike). As soon as I hear I say yes.

Joey Andrews · Post by **Joey Andrews** » 22 Sep 2013 8:04 pm

Closer up Bob, I'll just keep her for now. Thanks

Lane Gray · Post by **Lane Gray** » 23 Sep 2013 6:19 am

Michael, Tom Bradshaw and Michael Yahl sell a gizmo that will shift an adjacent segment (I.e., you can get an additional 5th string raise from either a 5th string lower or 6th string raise). About 7 bucks. Jim Palenscar might have 'em too.

Lee Dassow · Post by **Lee Dassow** » 23 Sep 2013 7:14 am

This happens sometimes, Sellers choice. If I owned
it I wouldn't have sold It either. To nice a steel.
Tennessee Lee

Nicholas Ackron · Post by **Nicholas Ackron** » 23 Sep 2013 9:52 am

Beautiful axe!

The Steel Guitar Forum

Bob closer up I'm going to keep her

Bob closer up I'm going to keep her

copedent

Msa

Re: copedent

Pm

Msa

Msa

Msa

Msa

U-12 Easy

Thanks

msa 12 string

Msa