Relative heights of A and B pedals
Moderator: Shoshanah Marohn
- Christopher Woitach
- Posts: 1101
- Joined: 24 Dec 2009 9:35 am
- Location: Portland, Oregon, USA
- Contact:
Relative heights of A and B pedals
I'm having a little trouble rocking on the A and B pedals.
My A pedal is significantly higher than my B pedal - is there an optimum height difference, or is this just an "experiment till you get it right" thing?
Because I have a modern MSA Studio Pro, changing pedal height is easy, so I'm fine with experimenting - I'm just hoping for some pointers.
Thanks!
My A pedal is significantly higher than my B pedal - is there an optimum height difference, or is this just an "experiment till you get it right" thing?
Because I have a modern MSA Studio Pro, changing pedal height is easy, so I'm fine with experimenting - I'm just hoping for some pointers.
Thanks!
- Trevor Carey-Smith
- Posts: 16
- Joined: 31 Oct 2007 5:56 pm
- Location: Wellington, New Zealand
- Contact:
- Douglas Schuch
- Posts: 1390
- Joined: 10 Jun 2011 9:33 am
- Location: Valencia, Philippines
Christopher, mine is much like yours - I have to have a definite angle to my foot to apply A+B together, but it makes rocking on and off the A pedal much easier, particularly when I only want A. I think there is no rule, except set it where you feel most comfortable making the moves. I think, on average, most people have the A-pedal slightly higher.
Pedal steel, lap steel, resonator, blues harp - why suck at just one instrument when you can do so on many?
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
I addressed this to another post a new player had started. Make your pedal steel your own. Sometimes it will take multiple times of adjustments, but eventually, you'll get it exactly right, and it will even improve your playing (and your confidence!).
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
-
- Posts: 429
- Joined: 17 Sep 2010 8:58 am
-
- Posts: 1920
- Joined: 22 Mar 2007 7:45 am
- Location: California, USA
- Christopher Woitach
- Posts: 1101
- Joined: 24 Dec 2009 9:35 am
- Location: Portland, Oregon, USA
- Contact:
I play S-12 Bb6, almost exactly Reece's last setup. LKL and A affect the same string, so no problem there
There is a big stretch over to those pedals, so I'm at an angle.
I tried the A and B at the same height - I'm pretty sure I will raise it slightly, but less than it was
Thank you, everyone - I appreciate you taking the time to respond!
I never used these pedals much, until recently, when I started playing some country tunes with a band I play guitar and steel for here in Portland.
Pete Burak enjoyed saying I was the only pedal steel player that never used his AB pedals!
There is a big stretch over to those pedals, so I'm at an angle.
I tried the A and B at the same height - I'm pretty sure I will raise it slightly, but less than it was
Thank you, everyone - I appreciate you taking the time to respond!
I never used these pedals much, until recently, when I started playing some country tunes with a band I play guitar and steel for here in Portland.
Pete Burak enjoyed saying I was the only pedal steel player that never used his AB pedals!
- Bob Hoffnar
- Posts: 9244
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Tx
- Contact:
-
- Posts: 3009
- Joined: 1 Dec 1998 1:01 am
- Location: LA,CA
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
100% agreed!And things can feel different if you play in another pair of shoes.
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
My A pedal is slightly higher than the B pedal. But like Bob Hoffnar notes, they both bottom out at about the same level - the main point that I've found after 30 plus years with pedal steel.
Although I primarily play in boots, I can do equally well with other types of shoes. Shoe types should not an issue.
Although I primarily play in boots, I can do equally well with other types of shoes. Shoe types should not an issue.
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
- Douglas Schuch
- Posts: 1390
- Joined: 10 Jun 2011 9:33 am
- Location: Valencia, Philippines
Chris, No problem. I don't mind giving advice to my betters... the opportunity arises so infrequently! I figured that was the issue - after playing all that easy extended-chord jazz you felt ready to tackle some difficult three-chord country!
Pedal steel, lap steel, resonator, blues harp - why suck at just one instrument when you can do so on many?
- Christopher Woitach
- Posts: 1101
- Joined: 24 Dec 2009 9:35 am
- Location: Portland, Oregon, USA
- Contact:
Douglas -
I have to admit - the tradition of country steel guitar is so deep, and so beautiful, that it's oddly daunting to learn!
I can, and do, happily and comfortably play country music on six string. Playing jazz on the pedal steel is hard for me, but I am getting somewhere, at least. "E9" style country pedal steel seems much more unforgiving, and I suck, right now! Working on it, getting better....
I have to admit - the tradition of country steel guitar is so deep, and so beautiful, that it's oddly daunting to learn!
I can, and do, happily and comfortably play country music on six string. Playing jazz on the pedal steel is hard for me, but I am getting somewhere, at least. "E9" style country pedal steel seems much more unforgiving, and I suck, right now! Working on it, getting better....
- Dave Grafe
- Posts: 4457
- Joined: 29 Oct 2004 12:01 am
- Location: Hudson River Valley NY
- Contact:
There are a couple of factors to consider, Chris:
First, the timing issues due to the difference in pull length between the whole-step A and half-step B pedals, and how (or IF!) this is addressed depends on the mechanics of the instrument. The P/P is fairly limited in timing options, whereas some of the more modern guitars have multiple holes on the bell-cranks to facilitate precision timing of every pull.
I personally like to have the two pedals bottom out at close to the same height; on a D10 particularly the B pedal will be just a tad bit lower due to the angle of the left leg, the point being to find a natural resting place for the foot when the pedals are pressed together.
Then there are the ergonomics of the leg and ankle, and the need to be able to rock completely off of either pedal without lifting the other, and of course pressing either without moving the changer finger on the other. This may bring up slack issues, again depending on your instrument - a push-pull guitar requires some slop in the raises that an all-pull does not. Having tightened up the action and timing as much as possible, I set up the C pedal to be the same as the A pedal, then it usually takes some trial and error for me to get the B pedal rod length just right - for me the unpressed B pedal usually ends up a bit lower than the unpressed A when I'm done.
First, the timing issues due to the difference in pull length between the whole-step A and half-step B pedals, and how (or IF!) this is addressed depends on the mechanics of the instrument. The P/P is fairly limited in timing options, whereas some of the more modern guitars have multiple holes on the bell-cranks to facilitate precision timing of every pull.
I personally like to have the two pedals bottom out at close to the same height; on a D10 particularly the B pedal will be just a tad bit lower due to the angle of the left leg, the point being to find a natural resting place for the foot when the pedals are pressed together.
Then there are the ergonomics of the leg and ankle, and the need to be able to rock completely off of either pedal without lifting the other, and of course pressing either without moving the changer finger on the other. This may bring up slack issues, again depending on your instrument - a push-pull guitar requires some slop in the raises that an all-pull does not. Having tightened up the action and timing as much as possible, I set up the C pedal to be the same as the A pedal, then it usually takes some trial and error for me to get the B pedal rod length just right - for me the unpressed B pedal usually ends up a bit lower than the unpressed A when I'm done.
-
- Posts: 388
- Joined: 23 Jan 2008 1:02 pm
- Location: Cambridgeshire, UK
Nobody seems to have mentioned that it matters whether you have the Emmons or Day setup. This is because we tend to find our ankle rolls better to one side than the other.
I started on Emmons, and had trouble actuating B only without fouling the A. Now it's easier with the Day setup. A without B is easy either way, I think.
Will
I started on Emmons, and had trouble actuating B only without fouling the A. Now it's easier with the Day setup. A without B is easy either way, I think.
Will
Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay
- Eric Philippsen
- Posts: 1966
- Joined: 14 Jan 2008 5:38 pm
- Location: Central Indiana, USA
My thanks to Dave.
I read his post and never really thought about the timing issue for A&B. Dang, after all these years ya' still learn something new. Then again, he is right about the limited timing adjustment for the A&B pedals on a push, pull, which is what my main gigging steel is.
Then again, I think I'm going to take another look at the slack in my guitars.
I read his post and never really thought about the timing issue for A&B. Dang, after all these years ya' still learn something new. Then again, he is right about the limited timing adjustment for the A&B pedals on a push, pull, which is what my main gigging steel is.
Then again, I think I'm going to take another look at the slack in my guitars.
-
- Posts: 4643
- Joined: 17 Feb 2004 1:01 am
- Location: Arkansas,
A & B pedals
What about having your pedals set for playing on carpet, then you have to play on a hardwood floor
of some kind. I've had to lower my B pedal down further because of not being able to rock off the B on to the A far enough, when switching to a hard wood floor. Has anybody had this problem? It don't take but a minute to do the adjustment, but it's kind of agravating.
terry
of some kind. I've had to lower my B pedal down further because of not being able to rock off the B on to the A far enough, when switching to a hard wood floor. Has anybody had this problem? It don't take but a minute to do the adjustment, but it's kind of agravating.
terry
-
- Posts: 655
- Joined: 26 Nov 2003 1:01 am
- Location: Mansfield, Ohio, USA
Re: A & B pedals
Terry, have had this problem, especially on deep pile carpet. What I did was cut sheet of plywood just large enough to sit my steel and seat on it and then painted it so it wouldn't look bad. Didn't have to make anymore adjustments. Never played anywhere that had carpet that I had to worry about making adjustments.Terry Sneed wrote:What about having your pedals set for playing on carpet, then you have to play on a hardwood floor
of some kind. I've had to lower my B pedal down further because of not being able to rock off the B on to the A far enough, when switching to a hard wood floor. Has anybody had this problem? It don't take but a minute to do the adjustment, but it's kind of agravating.
terry
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
If you are switching back and forth from carpet to wood a lot, I think I would opt for a piece of plywood to set the steel on.
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
-
- Posts: 379
- Joined: 28 Jun 2013 1:10 pm
- Location: PADUCAH, KY, USA
Pedal height adjustment for a and B pedals(
I use large medicine bottle caps , are the things you put under coffee cups, to keep from marking your finished tables. These were good on carpet so that you don't have to readjust your pedals. It beats carrying a round a sheet of plywood. And you can put them in your pack seats after playing.
-
- Posts: 4643
- Joined: 17 Feb 2004 1:01 am
- Location: Arkansas,
A & B pedals
Thanks Mike, Scott, and Willie. Hmmm, Well it would be kind of hard to be carrying around a large piece of plywood, and since I play at different Churches, I'm not sure the Pastors would like me laying a piece of plywood down on their fancy flooring.
Willie, are you talkin about coasters? I might give that a try. Thanks again fellers.
terry
Willie, are you talkin about coasters? I might give that a try. Thanks again fellers.
terry
- Clete Ritta
- Posts: 2005
- Joined: 5 Jun 2009 6:58 pm
- Location: San Antonio, Texas
What Bob H. said. The A pedal has a longer throw to raise a whole step than the B pedal raising a half. Also, the A pedal is frequently half pedaled so a longer throw helps. It is usually set slightly higher than B so that they bottom out at the same height. Ultimately its all a matter of preference, so set the height however you like!
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
These are how mine are adjusted. I play the Day setup. P1 is a special pedal. P2 is my C pedal. P3 is my B pedal. P4 is my A pedal. P5 lowers string 5 to Bb with a split tuner to be used along with pedal 4 to get the C note. I never subscribed to the thought that the pedals should start or end at all the same level. They are adjusted for the ability to let of adjacent pedals while still holding down a pedal. With my leg at an angle, I don't find it advantageous to have the pedals be all level when pressed. That's not how my foot works. I imagine this same setup would be what I would have if I used the Emmons setup (starting with P2). My foot works with the same rocking motions.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.