Lower E's on the Right!!!??

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
Kev Conlon
Posts: 49
Joined: 9 Mar 2013 8:12 pm
Location: Leeds, England

Lower E's on the Right!!!??

Post by Kev Conlon »

I've noticed that David Hartley (among others, I'm sure) lowers his E's on the RKL, and wondered whether it might be worth a try?
What are the pros and cons?
....all opinions welcome :D
Last edited by Kev Conlon on 13 Aug 2013 1:34 am, edited 2 times in total.
MCI D10 8+6 / Winsteel SD-10 / Peavey Nashville 1000 / Hilton Vol
Gibson L00 (30's) / Weissenborn Style 3 (20's) / Kalamazoo KEH Lap Steel (30's) /
Beltona Triple Resonator-Custom / Selmer Petit Bouche - Handmade /
Custom Tele - Handmade /
User avatar
Dan Beller-McKenna
Posts: 2979
Joined: 3 Apr 2005 1:01 am
Location: Durham, New Hampshire, USA
Contact:

Post by Dan Beller-McKenna »

Kev,

I think you mean "lowers" the Es on RKL. (Does he raise them on RKR?) Per the lowering: many threads on the subject of whether to lower on RKL or LKR. Speaking as one who lowers on RKL, the advantage for me is that I tend to use that lower with various pedal combinations, and it's more comfortable to have my left leg free while holding the Es down. The advantage to lowering the Es on LKR is that, assuming you raise the Es with LKL, you would never use those change together, so you don't "lose" the other change on the knee (the way, for example, if you lower Es on the right, you can't make a chromatic lick dropping E to D# with RKL, holding the D# while playing the unison on string 2, and then lowering that to D [and perhaps on to C#] with RKR).

Now, if David does indeed also raise the Es on the right (presumably RKR), that would just seem to me to be a matter of personal preference. Main consideration would be putting a change on LKL that is useful with the A, and possibly the B pedal.

Dan
Kev Conlon
Posts: 49
Joined: 9 Mar 2013 8:12 pm
Location: Leeds, England

Post by Kev Conlon »

Hi Dan
....whoops...you're right....we're talking about lowering here.
MCI D10 8+6 / Winsteel SD-10 / Peavey Nashville 1000 / Hilton Vol
Gibson L00 (30's) / Weissenborn Style 3 (20's) / Kalamazoo KEH Lap Steel (30's) /
Beltona Triple Resonator-Custom / Selmer Petit Bouche - Handmade /
Custom Tele - Handmade /
User avatar
Douglas Schuch
Posts: 1390
Joined: 10 Jun 2011 9:33 am
Location: Valencia, Philippines

Post by Douglas Schuch »

Kev,

There was a long and very interesting discussion of this a number of years ago on the forum, with both Paul Franklin and Buddy Emmons contributing. You can find it here:

http://bb.steelguitarforum.com/viewtopic.php?t=29594
Pedal steel, lap steel, resonator, blues harp - why suck at just one instrument when you can do so on many?
User avatar
Tim Konecky
Posts: 107
Joined: 17 Apr 2008 6:37 am
Location: Lincoln, Nebraska, USA

Post by Tim Konecky »

Thanks for sharing Doug! That was a fun read! Seems it got a little heated in that discussion.
Jackson Blackjack
Fender Deluxe
Peavey Nashville 400
Kev Conlon
Posts: 49
Joined: 9 Mar 2013 8:12 pm
Location: Leeds, England

Post by Kev Conlon »

.....It most certainly did!!
Thanks anyway Doug
User avatar
Dave Grafe
Posts: 4457
Joined: 29 Oct 2004 12:01 am
Location: Hudson River Valley NY
Contact:

Post by Dave Grafe »

FYI, ShoBud standard setup for many years was E>F @ LKL and E>D# @ RKL. A number of Alaskan pedal steelers have this setup...
Last edited by Dave Grafe on 14 Aug 2013 8:04 am, edited 1 time in total.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

" E>F @ LKL and E>D# @ LKL."?
User avatar
Dick Wood
Posts: 3060
Joined: 2 May 2005 12:01 am
Location: Springtown Texas, USA
Contact:

Post by Dick Wood »

I did it on the LKR for 16 years and one day switched to RKL. It only took me a short while to get used to it so it's just a matter of where you want it.I will add that for some it could, due to leg/knee issues be better one way than the other.
Cops aren't paid much so I steel at night.
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

Every person's "vocabulary" of combinations and licks dictates what they can do, and vice versa.
I dig the tritone resolve of 5A#/8 to 5/8D#², that works best for me having them on LKV and LKR respectively.
I also use the 6th lower AND the 2nd lower together with the D# lever (but rarely at the same time ³), so they must both ride on the opposite leg from the D# lever. Since I use all 3 levers that don't hit the Ds get used with the D# lever, having D# on the LKR makes sense.
My Uni combines the D# lever and the F lever on one lever at RKL, the A# lever is LKL rear, the C# lever is LKL front and the F# lever (6th lower) is LKR front, so everything works together.

¹By A# I mean lowering the Bs to A#
²By D# I mean lowering the Ds
³I can hit RKL with the leg, strike string two and pull the right hand down and pull RKR manually as 6 sustains, or the other way 'round, but that's a pain. I only do that when I feel like showing off.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

I like them on opposite legs. I can make the change from D# to F very smoothly, and quickly, with no pause in the middle of the change, at E, as one knee moves between levers.
Bob Carlucci
Posts: 6965
Joined: 26 Dec 2003 1:01 am
Location: Candor, New York, USA

Post by Bob Carlucci »

If you bought an MSA from about 1970-71` until about 85 or so, your guitar came factory with The E-Eb lower on RKR, and the E-F raise on the RKL.. They sold thousands, and most were sold through music stores in those days.. that was standard MSA for YEARS.. I find it interesting that so few players stuck with that set up... There are a few dozen around here that use that knee lever set up, but we are in a very tiny minority.. Seems like when guys sold their MSA steels, they just moved on from the "backward" lever set up that MSA used for many many years... Even today, most MSA guitars that fall into my clutches have been reversed from the lever set up they were shipped with...bob
I'm over the hill and hittin'rocks on the way down!

no gear list for me.. you don't have the time......
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

i've always had day tuning on pedals 1 and 2
LKL lower 2nd string and 9
LKR E-F
RKL lower E's
RKR raise E-F#
thst's the basics...got other pedals and levers also.

all my steels are set that way cause i know how to use it that way. seems as natural (or more) than other setups. close to 40 yrs.
User avatar
Paddy Long
Posts: 5462
Joined: 19 Aug 2003 12:01 am
Location: Christchurch, New Zealand

Post by Paddy Long »

Lowering the E's on the RKL is actually the correct place to have it !!!!!!!!!! :lol:
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
User avatar
Bill Ladd
Posts: 765
Joined: 1 Nov 2009 8:38 am
Location: Wilmington, NC, USA

Post by Bill Ladd »

My first guitar had the E lowers on the RKL, that's how I learned.

My current guitar has the E lowers and raises on the left.

I kept it there 'cause I'm too lazy to switch it.
User avatar
Craig A Davidson
Posts: 3848
Joined: 16 Feb 2001 1:01 am
Location: Wisconsin Rapids, Wisconsin USA
Contact:

Post by Craig A Davidson »

All my guitars lower E's on RKL. My push-pull when I had it was the only guitar I ever had that had both knees on the left.
Bryant Aycock
Posts: 267
Joined: 8 Oct 2007 1:16 pm
Location: Pikeville, North Carolina

Post by Bryant Aycock »

I lower my E to Eb on my RKL. Maybe a little unusual, but I raise my E to F# on my RKR. Since I never raise and lower at the same time, I like it on one knee. Works for me.
User avatar
Andy DePaule
Posts: 2576
Joined: 20 Jun 1999 12:01 am
Location: Saigon, Viet Nam & Springfield, Oregon
Contact:

Maybe it depends on how long ago you started?

Post by Andy DePaule »

Maybe it depends on how long ago you started?
When I got my first steel, a S-10 Sho Bud it had just two knee levers both were on the right leg.
And it was the RKL that lowered the E's and RKR Lowered the 2nd and 9th strings.
I just got used to that way of using it.
I have had that on the LKR and it works well there too but I prefer it on the right. That is so my left leg is a little more free to work the pedals when I have the E's lowered for a long time.
In the end I think it only matters what you are used too or prefer.
Just my 2¢ worth....
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project.
User avatar
CrowBear Schmitt
Posts: 11624
Joined: 8 Apr 2000 12:01 am
Location: Ariege, - PairO'knees, - France
Contact:

Post by CrowBear Schmitt »

as mentioned, the Es to Eb lower was used, if not introduced, by Sho~Bud on RKL ( right knee left )
Buddy Emmons had his on LKR ( left knee right ) which became a mainstay for many
i personally prefer my E lever on RKL the Sho~Bud style since it frees my left leg & feet to be indepedent from that lever
the E lever is imo the most used lever
by having it on RKL, i find it handy to have it above my volume pedal - i find the 2 get along very well
your mileage may vary

a good point in that you can use the F lever ( E to F raise ) on LKL & the E lever on RKL alternatively
it's quite a useful harmonic movement
Post Reply