Author |
Topic: Sarno Octal Preamp |
Mickey Adams
From: Bandera Texas
|
Posted 18 Jul 2013 2:35 pm
|
|
Noel, I have not used mine onstage yet. They stay at home mounted on the wall in my studio...I absolutely love this setup. I use a Freeloader, to the Octal, out to an RV3, and the into a DD3 delay. Since the delay is stereo I send one signal to each QSC K12...the tone is to die for... _________________ ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Tom Wolverton
From: Carpinteria, CA
|
Posted 18 Jul 2013 7:36 pm
|
|
I'm using it for PSG recording and the engineers are loving it's warm tone and zero noise. Unfortunately, it can't correct my clams. But that's what overdubs are for.
Thanks for the V-8, Brad.
"I coulda had a V8 ! " _________________ To write with a broken pencil is pointless. |
|
|
|
Rick Contino
From: Brattleboro, Vermont
|
Posted 19 Jul 2013 3:21 am
|
|
Any of you V-8 users have pictures of it mounted in a compact rack setup? _________________ Shobud "The Professional" D-10, Stage One S-10, National "New Yorker," NV400 |
|
|
|
Jay Ganz
From: Out Behind The Barn
|
Posted 19 Jul 2013 10:49 am
|
|
Mickey Adams wrote: |
. I use a Freeloader, to the Octal, out to an RV3, and the into a DD3 delay. Since the delay is stereo I send one signal to each QSC K12...the tone is to die for... |
So, aren't you "digitizing" that nice pure analog tone from the Sarno preamp into the Boss pedals? _________________ Straight Ahead 500 watt mini~power amp |
|
|
|
John Macy
From: Rockport TX/Denver CO
|
Posted 19 Jul 2013 12:28 pm
|
|
Just cut my first two tracks with the V8....one word...WOW! I am not a huge direct fan, but I am running into the V8 and into a nice API preamp via the transformer direct out and it kills....similar to the direct rig I use with a Mesa Boogie Studio Pre, but creamier and sweeter...nice, nice job, Brad! _________________ John Macy
Rockport, TX
Engineer/Producer/Steel Guitar |
|
|
|
Noel Welsh
From: Pearland Texas, USA
|
Posted 21 Jul 2013 4:45 pm
|
|
Rick
This is my V8 in the rack. I made a bracket to hold the V8 and the Black Box
 _________________ Mullen G2 SD10, Nashville 400 and 112
Steel Guitar Black Box,
Hilton Pedal,Sarno V8 Pre Amp,Benado Steel Dream |
|
|
|
Rick Contino
From: Brattleboro, Vermont
|
Posted 21 Jul 2013 6:10 pm
|
|
Woah, sweet rig. Thanks for the pic, Noel. _________________ Shobud "The Professional" D-10, Stage One S-10, National "New Yorker," NV400 |
|
|
|
Noel Welsh
From: Pearland Texas, USA
|
Posted 22 Jul 2013 4:30 pm
|
|
Thanks Rick
I just did a gig this week end using this rig with a QSC K12 speaker
The sound was awesome _________________ Mullen G2 SD10, Nashville 400 and 112
Steel Guitar Black Box,
Hilton Pedal,Sarno V8 Pre Amp,Benado Steel Dream |
|
|
|
Eric Philippsen
From: Central Florida USA
|
Posted 22 Jul 2013 8:04 pm
|
|
I used my setup at a pretty big outdoor gig this last Saturday where we were the opening act. It was nice to have the XLR to the house board.
Sweet, full sound. |
|
|
|
Jay Ganz
From: Out Behind The Barn
|
|
|
|
Eric Philippsen
From: Central Florida USA
|
Posted 23 Jul 2013 6:02 pm
|
|
One thing I have noticed is that the tubes can be microphonic. I discovered that when I placed the preamp directly on top of my Furlong cabinet while practicing. The cabinet's vibrations caused the tubes to buzz. So, I put a folded towel under the preamp and it was back to clear tone. That's not a problem on gigs where I separate the two pieces.
Then again, maybe it's just the two tubes in my particular unit. Anyone else experience this? |
|
|
|
Noel Welsh
From: Pearland Texas, USA
|
Posted 24 Jul 2013 4:53 pm
|
|
Hey Eric
That happened to mine a few times. It would be microphonic one time and the next time I turned it on it would be fine. This happened a few few tiimes a few weeks ago but is ok now. Not sure what caused it. _________________ Mullen G2 SD10, Nashville 400 and 112
Steel Guitar Black Box,
Hilton Pedal,Sarno V8 Pre Amp,Benado Steel Dream |
|
|
|
Brad Sarno
From: St. Louis, MO USA
|
Posted 26 Jul 2013 12:59 pm
|
|
Guys, those with the microphonic issue, drop me an email. I've got a new solution for that issue and have been implementing it into all the more recent productions models.
sarnomusic@earthlink.net
Brad |
|
|
|
George Seymour
From: Notown, Vermont, USA
|
Posted 27 Jul 2013 5:02 am
|
|
Noel Welsh wrote: |
Thanks Rick
I just did a gig this week end using this rig with a QSC K12 speaker
The sound was awesome |
Did the Benado PF have anything to do with it? I know mine does! |
|
|
|
Noel Welsh
From: Pearland Texas, USA
|
Posted 27 Jul 2013 8:26 am
|
|
Yes, the Benado PF definitely makes a difference. it's an awesome effects unit! _________________ Mullen G2 SD10, Nashville 400 and 112
Steel Guitar Black Box,
Hilton Pedal,Sarno V8 Pre Amp,Benado Steel Dream |
|
|
|
Len Amaral
From: Rehoboth,MA 02769
|
Posted 27 Jul 2013 1:29 pm
|
|
The Rev, V8 and Classic & Tonic all have their own unique sound. The V8 is not rack mountable but I use it on a small desk with a speaker and a power amp off to the side. It's my little Island off to the side of the mess I created in my studio. I also don't play out any longer so the rack items get little use these days.
I'll post a picture of my studio and you will understand
 |
|
|
|
Len Amaral
From: Rehoboth,MA 02769
|
Posted 27 Jul 2013 1:30 pm
|
|
Here are some pics of my messy studio and my little corner with my Octal, a Tele and the only place I can sit and enjoy myself.

Last edited by Len Amaral on 28 Jul 2013 3:59 am; edited 1 time in total |
|
|
|
Brad Sarno
From: St. Louis, MO USA
|
Posted 27 Jul 2013 5:27 pm
|
|
Although, we do now have a custom rack shelf for the V8, so technically speaking, it IS now rack-mountable. I just got back from traveling, and soon I hope to get the shipping boxes rounded up so I can make the new shelves available. They are pre-drilled to mount a V8, a Black Box or both simultaneously.
B |
|
|
|