E9th(B6th,Bb6th) E to F lever, a Keeper?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
bob drawbaugh
Posts: 1209
Joined: 30 Dec 1999 1:01 am
Location: scottsboro, al. usa

E9th(B6th,Bb6th) E to F lever, a Keeper?

Post by bob drawbaugh »

This lever had been a standard on the E9th for ever it seems like. I have noticed that some guys only raise the 8th string and not the 4th. Some guys don't use it at all,most Bb6th U12 pickers. Is this lever a must have for you, Or is it one you use but could live with out it.
User avatar
Michael Johnstone
Posts: 3841
Joined: 29 Oct 1998 1:01 am
Location: Sylmar,Ca. USA

Post by Michael Johnstone »

Couldn't live without it on my U-12 E9/B6. Besides all the regular E9 stuff,sometimes when I use the locking E-Eb lever,I can momentarily override it by hitting the E-F lever.
C Dixon
Posts: 7061
Joined: 4 Aug 1998 11:00 pm
Location: Duluth, GA USA
Contact:

Post by C Dixon »

mega dittos Michael. Simply could not live with out it on my U-12.

carl
User avatar
Larry Bell
Posts: 5550
Joined: 4 Aug 1998 11:00 pm
Location: Englewood, Florida
Contact:

Post by Larry Bell »

If you play any traditional E9 stuff, I can't imagine not having an F lever.

------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

I think its a pretty redundant lever myself.
There are tons of threads with folks claiming it's never in tune... and several ideas of how to get it in tune, ie. use a wound 6th, use a compensator, try ET, JI, xyz tuning charts, ect...
I've found no loss of ways to replicate the chords and licks that the E>F raise lever is used for (hence it's redundancy).
FWIW, I also ditched the C pedal about 2-3 years ago for the same reasons.
I remember my first few weeks learning the pedals with a PSG and Winnies book, thinking... A pedal, BC pedals, uh... these are all the same chords!
This same exact lick can be played (without moving my foot) if I play it here, ect...

User avatar
Bobby Lee
Site Admin
Posts: 14863
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, California, USA
Contact:

Post by Bobby Lee »

Pete and I disagree on this one. To me, it's the most important lever on the guitar. One of the first things I learned was how to slide between the 3 inversions of a major chord: <font face="monospace" size="3"><pre>E ___3____6F____10_____15___
B ___3____6A____10A____15___
G# ___3____6_____10B____15___</pre></font>To me, this is one of the rudiments of the pedal steel. I wouldn't want to play E9th without an F lever. I'd lose too much music.

------------------
<small><img align=right src="http://b0b.com/b0b.gif" width="64" height="64">Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9), Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

First of all, Why would anyone want to play three notes at once? Image
Don't you know that's the fastest way to get told you're out of tune in a band situation! Image

Playing strings 3,4,5, on the 3rd fret is the same as 4,5,6, with A+F, on the 6th fret, is the same as... ect.

That tab you wrote is for the absolute day one beginner. There are tons of things to play without the A+F raise (the E>F raise being the part I find easily forgetable).

If I had to live with 1 lever, it would be E>Eb.
User avatar
Terry Wendt
Posts: 988
Joined: 25 Mar 2002 1:01 am
Location: Nashville, TN, USA
Contact:

Post by Terry Wendt »

I try to stay out of this stuff... but, I would not play pedal steel without this change, after 25 years and many, many changes, I agree with Bobby Lee as well. Rudimental change... and has nothing to do with playing three strings! Image

Image

Terry Wendt

------------------
PedalSteel.us Magazine

TheEarlyDays.com

and appearing regularly...aLotOfSpace.com
Jimmy Crawford/Russ Hicks... and Buddy Emmons on Bass!


Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

"...I would not play pedal steel without this change..."

Terry,
My guess is that you would be able to play just fine (and probably even better than ever!) without that lever.
Please take it off immediatly! Image
Pete B.

...and stop playing b0bs 3 note tab please.
David Reeves
Posts: 239
Joined: 2 Mar 2003 1:01 am
Location: Florida

Post by David Reeves »

As a beginner I would like to say that I have that lever and still can not play. Image

------------------
Stump Reeves


User avatar
Jim Smith
Posts: 7946
Joined: 4 Aug 1998 11:00 pm
Location: Midlothian, TX, USA

Post by Jim Smith »

Maybe these posts are all in jest, but Lloyd Green invented/discovered this change and added it to his guitar some 35 years ago or so as a change he thought was important. He has not added or modified any changes since. You can hear his story on the "Steel Summit with the Masters" video. Image
C Dixon
Posts: 7061
Joined: 4 Aug 1998 11:00 pm
Location: Duluth, GA USA
Contact:

Post by C Dixon »

To expound on what b0b said.

I have always felt that the PSG should permit the player to get ANY inversion of a chord at ANY fret on the major picked strings.

Examples:

(strings 4, 5 and 6)

1. Major--1st, 2nd AND 3rd inversions (obviously not the same chord).

2. Minor--1st, 2nd AND 3rd inversions (see item 1.)

3. 7th--All versions.

4. Dim--all inversions.

5. Aug--all inversions.

Etc, etc, etc.

In other words, a piano player or regular guitar player has always had the luxury of getting any inversion of any chord they wanted simply by moving fingers. I liken this to being able to do the same thing at the same fret when playing a steel guitar.

In fact, this is the very core and foundation of what pedals and/or knee levers are for, IMO.

Sure a given chord CAN be found by moving to other frets and changing string grips, but IMO this defeats the concept of this thread.

The PF pedal AND knee lever prooves this to me beyond any shadow of a doubt. So does BE's lowering of the 6th string a whole tone. As does Ralph Mooney's pedal (engaged by the right foot) raising 4 a whole tone. And lastly but not least is LG's "F" lever.

It is not good enough (IMO) for me to have the ability to get any chord at a particular fret. Rather it is the ability to get all inversions of any chords at the SAME fret. This then allows the "phrasing" (resolve) of music which to me, is what music is all about. NOT just sounding particular notes.

ONLY one man on earth, is able to do this with non-pedals. Since he is not human Image, the advent of pedals allows the rest of us to do it on a PSG. The F lever is as important as ANY pedal or knee lever ever; on the PSG IMO.

Praise God,

carl
Dennis Boyd
Posts: 156
Joined: 4 Aug 1998 11:00 pm
Location: Suisun City, CA USA

Post by Dennis Boyd »

Bob,

I agree with Bobby and Carl on this one. The E to F raise on strings 4, 8, and even 11 (optional) define the essence of pedal steel guitar playing. No other instrument allows you to sustain through all inversions of major and minor triads as you slide up or down the strings. With this change you have all the major triads on all the primary chord strings (3,4,5,6,8,and 10) on the E9th tuning.

The only other way you could get most of these changes would be to have the G# to F# lower on string 6. This leaves out string 3 however. Learn to play 2, 3, or even 4-note chords up and down the neck. Don't limit your options for creating music on the steel guitar. Practice a lot.

Dennis
John Knight
Posts: 310
Joined: 25 Jan 2001 1:01 am
Location: Alaska

Post by John Knight »

It sounds to me all this bantering is over options. Without the change do you have options, absolutly, with the change you have more options. There are examples of players through out the 60's and 70's that are playing great pedal steel with and without this change. Please remember, for those who are new to the instrument, that great E9th pedal steel can be played with just 3 pedals and 1 knee lever.

------------------
D 10 Thomas with 8&6, '61'D-10 Sho-Bud 8&3
S12 Knight 6&4
Nashville 400 and Profex II
81' Fender Twin JBL's
Asleep at the Steel

User avatar
Bobby Lee
Site Admin
Posts: 14863
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, California, USA
Contact:

Post by Bobby Lee »

Yes, as long as that lever is the F lever! Image Image

(Sorry, couldn't resist.)
User avatar
Larry Bell
Posts: 5550
Joined: 4 Aug 1998 11:00 pm
Location: Englewood, Florida
Contact:

Post by Larry Bell »

I believe that you'll find that the BEST players -- including Buddy Emmons -- installed that change shortly after 'The Bridge Washed Out' was released. I believe that Pete B's position is in the vast minority among pedal steel players. Most competent E9 players WOULD PUT THE F LEVER IN THE TOP THREE LEVERS ON THE E9 NECK. Read the Winnie Winston / Jimmie Crawford book "A Manual of Style". Jimmie, John Hughey, Terry Bethel, and Weldon Myrick were asked if they had 1, 2, 3, (up to how ever many they use) levers, what they would use. ALL considered it a very high priority on E9. (I'm not looking at the book right now, but I'm pretty certain on this one)

Raising the tonic note in the NP position to give a 1#dim or augmenting the 5th in the A+B position is very powerful musical magic, in addition to bridging the gap between those two positions when combined with the A pedal. That equals INDISPENSIBLE to me. Just my opinion, but I think a lot of others share it.

It's no different on the universal, assuming you play some traditional country. I must admit it is one lever I rarely use in B6, but there's a B6 combination (P5+P6) that gives more or less the same result by lowering the F# to F.

------added later----------------
I just looked at the book
Terry Bethel: FIRST (if he only had one lever it would be the F lever)
Jimmie Crawford: 'toss up' between Eb and F as the most important
John Hughey: SECOND
Weldon Myrick: FIRST
----------------------------------
(even I was surprised)

------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Larry Bell on 24 March 2003 at 02:38 PM.]</p></FONT>
User avatar
Rob Hamilton
Posts: 82
Joined: 30 Mar 2002 1:01 am
Location: Acton, MA, USA
Contact:

Post by Rob Hamilton »

I'm in the process of adding this lever. (see http://steelguitarforum.com/Forum5/HTML/005426.html ). Not having ever used it, I haven't missed it (except for when I want to slide in or out of that diminished chord). It's all you guys saying how important it is that has motivated me to get the parts together and do it. I hope you're right!

--Rob


------------------
Sho-Bud Pro-I, '62 Fender Vibrolux<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Rob Hamilton on 24 March 2003 at 03:40 PM.]</p></font><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Rob Hamilton on 24 March 2003 at 03:44 PM.]</p></FONT>
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

There ya have it Bob D.
9 out of 10 steelers say it's a keeper!
Is it "a keeper?" for you?


User avatar
David L. Donald
Posts: 13696
Joined: 17 Feb 2003 1:01 am
Location: Koh Samui Island, Thailand
Contact:

Post by David L. Donald »

Without this lever some much smoothness and variation will be lost per the posts above. I can't imagine it.
Who says you must play all the notes available (in good tune or not)at the same time?

The fact that they are there to use as a line is immense, you can't duplicate this by jumping up the neck. Proper jazz would be impossible at any realistic speed.
I must heartily agree with Carl and b0b et al.
Post Reply