Seating Position
Moderator: Shoshanah Marohn
-
- Posts: 696
- Joined: 23 Jan 2001 1:01 am
- Location: Leicester, England.
Seating Position
Is there such a thing as the perfect seating position. I know the obvious answer is "whatever your happy with," but I have tried various seats, (I'm talking about the height of the seat)and find it difficult to decide. When I look at other Steel players, some look like they are on top of the Christmas tree, and others look like the springs have gone in the settee. What I am trying to get at is, if your seat is high then your forearms are going to be tilting forward, if your seat is low they will be tilting backwards, or should they be level
as you pick. Maybe a daft question but I'm curious to know if it makes a difference to the speed or feel of a player.
Cheers
Dave.
as you pick. Maybe a daft question but I'm curious to know if it makes a difference to the speed or feel of a player.
Cheers
Dave.
I believe there is. Just as many piano players will adjust the height and location of both the seat and their seating position on it, such is necessay IMO, when playing the PSG.
If you think of most instruments, they are not fixed in position. Keyboard instruments, Drums and PSG's are among the few that require the player to adjust to the instrument rather than the reverse.
Becuase of this, the right seating invironment can make a big difference in a players perfomance. So, it you find yourself fighting certain required acts such as, picking, moving the bar, engaging pedals or knee levers, try different heights, sizes and locations of seats.
Might suprise ya
God bless you all,
carl
If you think of most instruments, they are not fixed in position. Keyboard instruments, Drums and PSG's are among the few that require the player to adjust to the instrument rather than the reverse.
Becuase of this, the right seating invironment can make a big difference in a players perfomance. So, it you find yourself fighting certain required acts such as, picking, moving the bar, engaging pedals or knee levers, try different heights, sizes and locations of seats.
Might suprise ya
God bless you all,
carl
I don't know if this is your answer but my brother, who is an Occupational Therapist who specializes in the hand, tells me that there should be a 15 degree backwards bend at the wrist to prevent carpal tunnel problems.
In other words, when playing, your hand should be slightly below your elbow. Another way of saying is is that your hand should bend back 15 degrees from flat. This would indicate that you should sit high enough so that this bend is natural as you play.
Hope this helps. It has for me.
Best Wishes
Tony
In other words, when playing, your hand should be slightly below your elbow. Another way of saying is is that your hand should bend back 15 degrees from flat. This would indicate that you should sit high enough so that this bend is natural as you play.
Hope this helps. It has for me.
Best Wishes
Tony
-
- Posts: 449
- Joined: 9 Jan 2002 1:01 am
- Location: Oxnard, CA, USA
-
- Posts: 696
- Joined: 23 Jan 2001 1:01 am
- Location: Leicester, England.
Sorry to hear that Dave. I acquired some Carpal Tunnel problems after playing bass for 7 years in a band. Since I've moved to steel, the problem has lessened dramatically.
I hope you are successful in dealing with your carpal tunnel pain and numbness. For the more serious cases, surgery seems to remedy the problem.
Best of luck, and my thoughts and prayers are with you.
Tony Orth
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Tony Orth on 20 January 2003 at 02:18 PM.]</p></FONT>
I hope you are successful in dealing with your carpal tunnel pain and numbness. For the more serious cases, surgery seems to remedy the problem.
Best of luck, and my thoughts and prayers are with you.
Tony Orth
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Tony Orth on 20 January 2003 at 02:18 PM.]</p></FONT>
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
I recently got a pack-seat (Elite Seat) and found it was way too high for my tastes. Years of playing with a chair taught me that I'm most comfortable with a seat that allows a near 90-degree angle between my thigh and shin. With a seat too high, my thighs are at too much of an angle, and they come too close to the back apron of the guitar. When the seat is too low, my forearm is resting (dragging) on the C6th strings when I'm playing E9th.
Comfort is the key to eliminating fatigue while playing. Of course...your mileage may vary.
Oh yeah, forgot to say I solved the "too high" problem with my new seat by cutting a little over an inch off the legs...works great now! <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Donny Hinson on 22 January 2003 at 04:33 PM.]</p></FONT>
Comfort is the key to eliminating fatigue while playing. Of course...your mileage may vary.
Oh yeah, forgot to say I solved the "too high" problem with my new seat by cutting a little over an inch off the legs...works great now! <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Donny Hinson on 22 January 2003 at 04:33 PM.]</p></FONT>
-
- Posts: 105
- Joined: 10 Aug 2002 12:01 am
- Location: Baton Rouge, Louisiana, USA
-
- Posts: 687
- Joined: 7 Dec 2000 1:01 am
- Location: Montreal, Canada
Being 6 feet tall, I have found the ideal seating position is with a seat 21 inches high, and a 2 inch lift kit on my guitar. I could have gotten away with one inch. The tops of my legs are on a downward angle, my legs don't rub on the bottom of the guitar, my forearms are at the right angle of attack like Tony described above and I can wear any kind of shoes or boots to play, even big long clown shoes.
- Nathan Delacretaz
- Posts: 462
- Joined: 21 Oct 2002 12:01 am
- Location: Austin, Texas, USA
Dave - I have wondered about this too, as I am just getting started and don't want to develop any bad habits.
The one thing guiding my choices right now is that I do a little lap steel at gigs as well as PSG. With the lap, I like to sit lower and have a good solid parallel between my thighs and the floor. However, on the PSG, because of the volume pedal and all the leg/foot motion, I find it's better to be a little higher up.
To accomodate these different heights and experiment some, I took a tip from Kim Deschamps (steel player for Charlie Robison and others) - I got a Rok-n-Sok drum throne with the pneumatic raise/lower. Of course, the downside is there's no in-seat storage.
The one thing guiding my choices right now is that I do a little lap steel at gigs as well as PSG. With the lap, I like to sit lower and have a good solid parallel between my thighs and the floor. However, on the PSG, because of the volume pedal and all the leg/foot motion, I find it's better to be a little higher up.
To accomodate these different heights and experiment some, I took a tip from Kim Deschamps (steel player for Charlie Robison and others) - I got a Rok-n-Sok drum throne with the pneumatic raise/lower. Of course, the downside is there's no in-seat storage.
-
- Posts: 696
- Joined: 23 Jan 2001 1:01 am
- Location: Leicester, England.
- Michael Holland
- Posts: 1297
- Joined: 4 Oct 2002 12:01 am
- Location: Nashville, Tennessee, USA
This is a very important subject in my opinion. I've found that it's best to 'sit up', especially for us taller players for whom 'standard height' guitars don't fit. I've found that raising both my guitar and seat about 2" makes for a much more comfortable playing position. If you are having any fatigue or numbness in hands, arms, shoulders or back, you should immediately raise your seating position and/or guitar height.
Glenn, my setup is exactly like yours and I, like you, am 6' tall (without the big, long clown shoes)
------------------
<small>Coming Soon -- PedalSteel.org<small>
Glenn, my setup is exactly like yours and I, like you, am 6' tall (without the big, long clown shoes)
------------------
<small>Coming Soon -- PedalSteel.org<small>
- Bosse Engzell
- Posts: 373
- Joined: 13 Jan 2000 1:01 am
- Location: �ppelbo, SWEDEN
This is importent. I have try to tell in other topics here. BUT I have been pushed down. Anyway there is new special chairs on the way over to US. They have been shipped to Terry Wendt in Nashville. I am using this type of chair myself. Link are: http://bluiez.pointclark.net/~bosse . Go to musicians.
Bosse in Sweden
ed for sp (help me Nathan)
Bosse in Sweden
ed for sp (help me Nathan)
-
- Posts: 869
- Joined: 27 Jun 1999 12:01 am
- Location: Elgin, Scotland
WC Edgar at http://www.toteseat.com will make you a seat any height you want, at no extra charge!
- David Mason
- Posts: 6072
- Joined: 6 Oct 2001 12:01 am
- Location: Cambridge, MD, USA
-
- Posts: 696
- Joined: 23 Jan 2001 1:01 am
- Location: Leicester, England.
What I'm still trying to figure out is, if you get two guys both 6 feet tall but one is a 30" inside leg and the other is say a 33" inside leg would they both use the same height of stool. Is it your overall height that counts or the length of your legs. I think we need some info from the seat makers here!!
Cheers Dave
Cheers Dave
-
- Posts: 687
- Joined: 7 Dec 2000 1:01 am
- Location: Montreal, Canada
The trick would be to find the most comfortable seating height for you and then make your guitar fit into the equation. I used an adjustable drum stool and stacked magazines under the guitar legs to figure out how much l needed to raise my guitar. You will know right away when you find what's best for you.
-
- Posts: 687
- Joined: 7 Dec 2000 1:01 am
- Location: Montreal, Canada
The trick would be to find the most comfortable seating height for you and then make your guitar fit into the equation. I used an adjustable drum stool and stacked magazines under the guitar legs to figure out how much l needed to raise my guitar. You will know right away when you find what's best for you.
- Larry Bell
- Posts: 5550
- Joined: 4 Aug 1998 11:00 pm
- Location: Englewood, Florida
- Contact:
I think the key measurement, from the perspective of the height of the back apron of the guitar is from the floor to the top of the knee. I seem to recall Bruce Zumsteg asking for that before he built my Zum many years ago and I believe it had between 1 and 1 1/2" of clearance from the top of my knee to the apron. If you have a vertical lever, you should also think about floor to top of knee with your leg entended like you would when you hit your up lever. That should be taken into consideration along with the throw and positioning of the lever on the guitar. Most are adjustable, fortunately, so you should have some leeway there (some AREN'T, however).
I've always felt that the line from your knee to your tailbone should be more or less parallel to the floor, as should the line from the wrists to elbow. That determines your optimal seat height. It's a shame nobody has devised a good adjustment mechanism for a PakASeat. One that could retrofit on existing seats would probably sell pretty well.
------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Larry Bell on 22 January 2003 at 11:33 AM.]</p></FONT>
I've always felt that the line from your knee to your tailbone should be more or less parallel to the floor, as should the line from the wrists to elbow. That determines your optimal seat height. It's a shame nobody has devised a good adjustment mechanism for a PakASeat. One that could retrofit on existing seats would probably sell pretty well.
------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Larry Bell on 22 January 2003 at 11:33 AM.]</p></FONT>