| Author |
Topic: steel guitar fret scale |
Larry Hillman
From:
New York, USA
|
Posted 25 Dec 2012 6:18 am |
|
| the fret scale for a steel guitar is taken from the nut to the bridge. yes or no? also, where can i find a fret calculator? ,y fret board is 25.5". with 24 frets. |
|
|
|
Tom Pettingill
From:
California, USA (deceased)
|
|
|
|
Larry Phleger
From:
DuBois, PA
|
Posted 25 Dec 2012 9:58 am
|
|
Here is an online program that will calculate your fret spacing and create a template that can be printed. You specify the scale length, number of strings, number of frets, and the string spacing at the nut and bridge. The program then creates a printable template.
http://www.ekips.org/tools/guitar/fretfind2d/ |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 25 Dec 2012 7:32 pm
|
|
If you are replacing a fretboard, I have some original Sho-Bud 25 1/2 inch scale eight string fretboards with 24 frets.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Russ Cudney
From:
Sonoma, California, USA
|
Posted 26 Dec 2012 8:25 am
|
|
17.817 is the constant...
_________________
1958 D8 Stringmaster, 1958 T8 Stringmaster, 1955 Q8 Stringmaster (in basket), 1949 Gibson BR9, 1953 Silvertone, 1957 Harmony H4 (yeah the cool black pearloid one), 1947 National Princess, 1969 Shobud S10 3X1 |
|
|
|
Larry Hillman
From:
New York, USA
|
Posted 27 Dec 2012 5:56 am fret spaciung
|
|
Thanks guys. got my fret spacing. when you live on SS retirement, you don't just go out and buy it. you DIY. now i'll see if I can find the electronics for it.
does anyone know of a web site that shows how to build a volume peddel? i have a reverb. again, thanks all. |
|
|
|
Larry Phleger
From:
DuBois, PA
|
Posted 27 Dec 2012 8:17 am
|
|
I too am on SS retirement and know what you mean. I am in the process of building a D10 non-pedal console. I decided to wind my own pickups. It was a lot of fun. I made my winder out or a discarded sewing machine, and rigged up a counter with an old adding machine I picked up at Goodwill for around 4 dollars. There is a great deal of information on Youtube about building and electronics. Stewart Mac Donald is a good source of supplies, and they have a wealth of information on electronics and other topics related to building and repair. Please post pictures of your finished product.  |
|
|
|
Jerry Recktenwald
From:
Louisville KY
|
Posted 30 Dec 2012 9:33 am
|
|
| My last build when it came to the fret board I set my bridge and nut for a 25" scale. Then I used my tuner and found each fret with my bar and marked it with a pen. The 1st string then the 10th string. All the way up the fretboard . You can measure out a fretboard out, but a guitar tuner is on the money. |
|
|
|
Jeff Au Hoy
From:
Honolulu, Hawai'i
|
Posted 30 Dec 2012 10:10 am
|
|
| Jerry, just curious... how did you align the pen mark with the bar position? |
|
|
|
Brian Henry
|
Posted 30 Dec 2012 10:29 am
|
|
Jeff, It is quite easy. You put a sharpie marker mark on the bullet point of the bar and line it up with a set square.
_________________
LOOKOUT MOUNTAIN GEORGIA |
|
|
|
Jeff Au Hoy
From:
Honolulu, Hawai'i
|
Posted 30 Dec 2012 11:15 am
|
|
| Cool! Thanks. |
|
|
|
Jerry Recktenwald
From:
Louisville KY
|
Posted 30 Dec 2012 1:24 pm
|
|
HEY Jeff I USED A 3/8 SPADE DRILL BIT, i HELD IT'S POINT DOWN AT THE FRETBOARD.
 I used the cutting edge on the string |
|
|
|
Larry Hillman
From:
New York, USA
|
Posted 31 Dec 2012 8:24 am fret scale
|
|
Jeff; Larry here. I picked up a digital caliper from
e-bay to mark the fret spacing then used a sharpi
to pull the lines. |
|
|
|
Larry Hillman
From:
New York, USA
|
Posted 31 Dec 2012 8:31 am fret spacing
|
|
| i used my kids 30 year old erector set to build a uickup winder. even had a level winder on it. had to use two motors tho. |
|
|
|
