| Author |
Topic: c1988 Williams D10 keyless |
Vincent Lenci
From:
Sussex, New Jersey
|
Posted 18 Dec 2012 6:36 pm |
|
Having a rough time tuning my 6 string g# to A. the A just won't stay in tune after pressing the pedal... been like this since I got the guitar last year. Thank!! Vin
_________________
Williams D10 8&8 1988 maple burl
Vox VTX 150 Pro ,AD 120 valvetronix
asst Peaveys 500,Renown, MX vtx |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 18 Dec 2012 6:50 pm
|
|
If it's going flat after you pedal it, the nylon tuning nut may be worn out and too loose, turning on the rod as you actuate it.
Try a new tuning nut if you have one or take that one off and squash it a little bit with pliers or swap ends with it if it's drilled all the way through.
Could be a number of things, but that seems the most likely. |
|
|
|
Vincent Lenci
From:
Sussex, New Jersey
|
Posted 18 Dec 2012 7:06 pm
|
|
Just recieved new tuning nuts yesterday from Bill ... quite sure i replaced it... will double check. Just had to step away before i break something! Thanks for the suggestion! Vin
_________________
Williams D10 8&8 1988 maple burl
Vox VTX 150 Pro ,AD 120 valvetronix
asst Peaveys 500,Renown, MX vtx |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 18 Dec 2012 7:15 pm
|
|
| I see. What's it doing? Flat, sharp, same thing every time or no pattern at all? |
|
|
|
Douglas Schuch
From:
Valencia, Philippines
|
Posted 18 Dec 2012 7:38 pm
|
|
Vince, I see you are new to the forum. If you are NOT a newbie player, forgive my beginner's answer. I was having problems getting a string to even tune up to the required note no matter what I did with the tuning nut. I eventually figured out it had a screw for split tuning limiting it. Doh! Split tuning means there are screws tapped into the end of the tuner just above the top of the guitar. See if you have any allen screws in the opening for that screw. This does not sound like the problem you describe, but just covering all bases.
Doug
_________________
Bringing steel guitar to the bukid of Negros Oriental! |
|
|
|
Vincent Lenci
From:
Sussex, New Jersey
|
Posted 18 Dec 2012 8:12 pm
|
|
Guys thanks for the responses. Jerry it seems like you nailed it. It seems I have missed that tuning nut. It's hard to believe it would be something so small . Jerry it would tune up to the A and after about 2 presses would start falling flat.... thanks for your help!!
_________________
Williams D10 8&8 1988 maple burl
Vox VTX 150 Pro ,AD 120 valvetronix
asst Peaveys 500,Renown, MX vtx |
|
|
|
Vincent Lenci
From:
Sussex, New Jersey
|
Posted 18 Dec 2012 8:16 pm
|
|
Douglas i dont even know what split tuning is..but thanks for the suggestion!
_________________
Williams D10 8&8 1988 maple burl
Vox VTX 150 Pro ,AD 120 valvetronix
asst Peaveys 500,Renown, MX vtx |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 18 Dec 2012 8:43 pm
|
|
 Glad you got it straightened out. Happy pickin'  |
|
|
|
