Knee Levers

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
Bobby Bowman
Posts: 2304
Joined: 30 Dec 1999 1:01 am
Location: Cypress, Texas, USA, R.I.P.
Contact:

Knee Levers

Post by Bobby Bowman »

I recieved an Email asking me to explain "reversing" knee levers on an Emmons push pull guitar.
Since the thread on setting up an Emmons changer is getting so long, I thought it best to start a new one.
To start with,,, I don't know if "reversing lever" is the proper term for these levers. It's what I started calling them years ago and no one, yet, has told me any different.
In general and almost in all cases that I know of, it's the levers that move to the right when the guitar is in the upright or playing position. Unlike most of the "players" a lot of the guitar mechanics, including me, think more of the guitar upside down. So from that view, it would be the levers that move to the left. This applies not only to Emmons' push pulls, but to all of the "all pull" guitars that I'm aware of.
To further explain; in general, the "raise" changer fingers (actuators) of the guitar are moved (pulled) toward the left or keyhead end of the guitar. To put this into perspective, the "arc" of the raise bell (or puller) crank is moving away from the changer. You will also notice that the other side of the arc is moving to the right or toward the changer, thus resulting in a "push".
Now, in order for a knee lever that's moving to the right to cause the raise side of the arc to move to the left (away from the changer end), you have to have a way to "reverse" the energy (or motion) of that lever to cause the mechinizum to move in the proper direction. In the case of a push pull, that is accomplished by running a rod from the lever to the lower, or push, side of the bell crank. Thus, when you move the lever, you are causing the bell crank to move in the needed direction.
Hope this explains a little better and is not confusing. I just don't know the technical (institutions of higher learning) terms for this kind of geometry and physics.
BB

------------------
If you play 'em, play 'em good!
If you build 'em, build 'em good!


rhcarden
Posts: 140
Joined: 23 Aug 1999 12:01 am
Location: Lampe,Mo / USA

Post by rhcarden »

It's what you do when you have a (push) and you need a (pull)!

------------------
Bob Carden 66 Emmons P/P 8/9
BMI 13 string 7/7
User avatar
Larry Bell
Posts: 5550
Joined: 4 Aug 1998 11:00 pm
Location: Englewood, Florida
Contact:

Post by Larry Bell »

Thanks, Bobby
With so many leverage options, it's great to have someone like you who understands the mechanics to help us out.

WE APPRECIATE THE TIME YOU DEVOTE TO US.

Happy holidays

------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro
Jeff Peterson
Posts: 890
Joined: 22 Jan 1999 1:01 am
Location: Nashville, TN USA
Contact:

Post by Jeff Peterson »

Bobby, do you have an 'Ebonics' keyboard? Hope you are well, I have not heard yet about the Houston Rodeo. We're playing the halftime show at the Liberty Bowl on the 31st, so if you watch I'll wave to whoever you're watching with. Love ya' brother, and you're giving some great advice on here.....as long as they read phonetically......
Bobby Bowman
Posts: 2304
Joined: 30 Dec 1999 1:01 am
Location: Cypress, Texas, USA, R.I.P.
Contact:

Post by Bobby Bowman »

Geoffery,
I almost got through the third grade! Image
I'll try to see ya the 31'st. Call me if you'd like. 281-856-9453.
BB

------------------
If you play 'em, play 'em good!
If you build 'em, build 'em good!


Post Reply