Sho-Bud permenant changer setup

John Knight · Post by **John Knight** » 2 Oct 2002 9:24 am

Need a little help from all those ole Sho-Bud owners. I've pulled all the rods off the guitar to do a refinish and I forgot to take notes on how the 9th and 10th string lower tuners go back together. These are the tuning nuts under the guitar.

------------------
D 10 Thomas with 8&6, '61'D-10 Sho-Bud 8&4
S12 Knight 4&4
Nashville 400 and Profex II
81' Fender Twin JBL's
Asleep at the Steel

Bobbe Seymour · Post by **Bobbe Seymour** » 2 Oct 2002 9:27 am

NOW YOU HAVE YOUR HANDS FULL!!!
They were ALL different! Good luck.
You can do it. Use your imagination, Shot did.

John Knight · Post by **John Knight** » 2 Oct 2002 10:17 am

Alrighty then. I can do that. I have all the parts, its just when I put them back on it didn't look right. But I have the principle down to get it to work. Thanks Bobbe

John Knight · Post by **John Knight** » 3 Oct 2002 4:14 pm

Little help

John Knight · Post by **John Knight** » 4 Nov 2002 10:44 am

C6th neck is all hooked up and play's nice. As nice as these old guitars play. This was a nice feeling as I had this guitar in complete pieces. E 9th is coming along.

------------------
D 10 Thomas with 8&6, '61'D-10 Sho-Bud 8&4
S12 Knight 4&4
Nashville 400 and Profex II
81' Fender Twin JBL's
Asleep at the Steel