Wnich Bar to use?

Rich Young · Post by **Rich Young** » 26 Jun 2000 6:28 pm

I've been playing around with different bars on the steel (Stringmaster D8) and I've found I like the tone of the bigger (7/8") bar but it's too long. I've been using a Dunlop 918 (3/4 x 2-7/8). I really like the length of this one. does anyone make a 7/8 x 2-7/8 (or 3") that has the indent in the end? I saw the Peirce 7/8" with the indent on the end but that is even longer (3-5/8 I believe).
Thanks

C. Brattain · Post by **C. Brattain** » 27 Jun 2000 11:36 am

We have a Red Rajah bar that is 7/8" by 3.25" but does not have a dent in the end.
"www.aguitarcenter.com"
Have a great day, Chuck

Rich Young · Post by **Rich Young** » 27 Jun 2000 10:57 pm

Yea, that size I can find fairly easily.
What I really need to know if anyone makes a 7/8 x 2-7/8 or 3.
Anyone know?

Smiley Roberts · Post by **Smiley Roberts** » 28 Jun 2000 10:04 am

I kinda like the bar at Tootsie's Orchid Lounge,myself.OOPS....wrong bar. Sorry Rich.

------------------
<pre> ~ ~
©¿© ars longa,
mm vita brevis
-=sr€=-</pre>

Dave Novak · Post by **Dave Novak** » 28 Jun 2000 3:41 pm

Rich,
Dunlop makes what they call the "Jerry Byrd
Bar", I think two of them. The one you want is S. S., 7.5oz, 7/8 x 2 7/8. Try Scott's Music

Good Luck

Dave

Rich Young · Post by **Rich Young** » 29 Jun 2000 7:44 pm

Though the bar on the package and on Scotty's site says 7/8, it's really a 3/4. It's the model 918, which I already have. I think I found a 7/8 x 3". I'm going to get it and see if I like it better than the 3/4.

Gerald Ross · Post by **Gerald Ross** » 30 Jun 2000 4:35 am

Try the Broz-O-Phonic. It's 2 7/8 long.
Weighs 5.5 oz and the same diameter as the
Dunlop Jerry Byrd.

George Keoki Lake · Post by **George Keoki Lake** » 5 Jul 2000 8:09 pm

There were about 200 Zirconian bars made, each with a serial number. These bars are fantastic ! I also use the Red Rajah which is still available and love it. Both bars glide over the strings silently and smoothly. I doubt you will find a Zirconian bar, but try to obtain a Red Rajah. Remember the old Black Rajah of the fifties ? Drop it on cement, bye bye Black Rajah ! The Red Rajah is far more durable.

Bobby Lee · Post by **Bobby Lee** » 6 Jul 2000 11:25 am

I use different bars with different guitars. The most critical thing to me is how well the nose matches the string spacing. I need to be able to do this slant easily: <pre>E ________________________
C ________5_______________
A ________5_______________
G ________/_______________
E ________4_______________
C ________________________
</pre>This will only work well if the nose of the bar lines up with the string spacing.

------------------
<img align=right src="http://b0b.com/Averybob.gif" width=64 height=81>Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session S-12 (E9), Speedy West D-10 (E9, D6),
Sierra 8 Laptop (D13), Fender Stringmaster D-8 (D13, A6)[This message was edited by Bobby Lee on 06 July 2000 at 01:04 PM.]

Rich Young · Post by **Rich Young** » 6 Jul 2000 5:57 pm

Bobby, which bar are you using on the Stringmaster?

Bobby Lee · Post by **Bobby Lee** » 7 Jul 2000 8:58 am

I use a standard 10-string BJS bar on the Stringmaster. Sorry, I don't know its dimensions.