sho bud on pawn stars
Moderator: Shoshanah Marohn
-
- Posts: 364
- Joined: 25 Nov 2008 3:30 pm
- Location: Missouri, USA
sho bud on pawn stars
watchin pawnstars on history, gonna pawn a sho bud check it out guys.
- Ray Montee
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- Contact:
About that Sho~Bud........
Watched the show.....Saw the guitar......nice looking but had mismatched pedals on the floor. Three small originals and five Bigsby looking pedals.
The Pawn Guy's son said it wouldn't be worth much more than $1,200 as not a lot of people are interested in them.
HUH?
The Pawn Guy's son said it wouldn't be worth much more than $1,200 as not a lot of people are interested in them.
HUH?
- Jerry Hayes
- Posts: 7489
- Joined: 3 Mar 1999 1:01 am
- Location: Virginia Beach, Va.
I thought it only had 7 pedals total. The three smaller ones on the left didn't look like the originals, I think they'd been replaced. It was a really beautiful guitar and only had one knee lever. Was it really worth what the "guitar expert" said it was? I'd have thought it'd be less than $2,000 as it wouldn't be ready to gig with without more pedals/knee levers. Maybe it was the collectability of it that warranted his appraisal.......JH in Va.
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!!
- Bob Knight
- Posts: 5096
- Joined: 4 Aug 1998 11:00 pm
- Location: Bowling Green KY
Expert??
I don't think ol' Jesse is a "Steel Guitar Expert",Was it really worth what the "guitar expert" said it was?
He once appraised a Gibson BR-9 at
$1500.(Actually worth about $300)
Last edited by Bob Knight on 10 Jul 2012 9:24 am, edited 1 time in total.
-
- Posts: 1408
- Joined: 1 Oct 2009 4:16 pm
- Location: Silver City, NM. USA
-
- Posts: 776
- Joined: 9 Jan 2010 7:07 pm
- Location: Groves, TX
- Gary Preston
- Posts: 3995
- Joined: 8 Apr 2003 12:01 am
- Location: Columbus, Ohio, USA
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
-
- Posts: 3009
- Joined: 1 Dec 1998 1:01 am
- Location: LA,CA
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
The comments from the young guys at the shop were exactly what I expected and what I have heard from many people over the years, including music stores... the mystery and ignorance surrounding the pedal steel guitar. It's interesting to note that the guys in the Pawn show AND the guys on American Pickers Have recognized Lap steels when they saw them on past shows and knew at least a little bit about them. The pedal steel is an additional level of complication that most people just can't wrap their brain around.
-
- Posts: 6895
- Joined: 15 Nov 2002 1:01 am
- Location: Kaaawa, Hawaii, USA
- Contact:
Sensible call, Doug.Doug Beaumier wrote:The guys in the Pawn show AND on American Pickers Have recognized steels and knew at least a little bit about them.
As tho non-musicians and a rocker should know the minutiae of pedal steels like those few who's lives revolve around them... Why those insufferable oafs!
At least the owner knew better than to sell low.
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- Joe Naylor
- Posts: 2711
- Joined: 19 Jan 2004 1:01 am
- Location: Avondale, Arizona, USA
That one is special - I think
I think I saw that steel close up last year and it is worn out - they do not know what they are looking at but that "expert" they have does not have a clue about steel guitars.
If that is the same one, that one, needs to go to someone that gives the old Buds TLC and rebuilds it --it needs lots more than polish.
Joe Naylor
www.steelseat.com
If that is the same one, that one, needs to go to someone that gives the old Buds TLC and rebuilds it --it needs lots more than polish.
Joe Naylor
www.steelseat.com
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
-
- Posts: 591
- Joined: 1 Mar 2000 1:01 am
-
- Posts: 6895
- Joined: 15 Nov 2002 1:01 am
- Location: Kaaawa, Hawaii, USA
- Contact:
Being that I posted directly under your's I was more referencing your overall post than quoting the full statement perfectly, my bad for microsizing. I concur with your full statement, but will add that even lap steels are beyond the average musician, as seen when the same rocker expertised the frypan, so it all washes the same as I see it. No biggie, my point being that nobody but those that know will look anything but ignorant when talking out of their league. I certainly couldn't begin commenting on anything below the fretboard on a pedal job.Doug Beaumier wrote:Thanks Ron, but you misquoted me.
- Henry Matthews
- Posts: 3974
- Joined: 7 Mar 2002 1:01 am
- Location: Texarkana, Ark USA
I think that Bud on there was actually in pretty rough shape. I had recorded the program and played it back and checked it out good. I think the three small pedals were the original pedals but had been cut down to get rid of the shoe soul snagging wide pedals. I would have done that with my Bud if I would have kept it. It was pretty evident that nobody knew any thing about a pedal steel, especially the guy they called in. I loved the way he was testing it and pumping the pedal., lol.
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
- Joe Naylor
- Posts: 2711
- Joined: 19 Jan 2004 1:01 am
- Location: Avondale, Arizona, USA
I agree
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
-
- Posts: 22
- Joined: 22 Dec 2006 1:01 am
- Location: Moorhead Minnesota, USA
- Contact:
I liked the conversation:
"Why do only old guys play it?"
"Because it's almost a lost art Cory, and alot of the music today is stupid so they don't use them. Now days these kids press a few buttons on a computer and think they are making music. This is a real instrument. It takes an actual musician to play it."
- Justin Griffith
- Posts: 1219
- Joined: 22 Nov 2001 1:01 am
- Location: Taylor, Texas, USA
Me too! That was the best part.Martin Vigesaa wrote:I liked the conversation:
"Why do only old guys play it?"
"Because it's almost a lost art Cory, and alot of the music today is stupid so they don't use them. Now days these kids press a few buttons on a computer and think they are making music. This is a real instrument. It takes an actual musician to play it."
Emmons/Sho~Bud/Blanton, Fender/Peavey.
Telonics pedal
Telonics pedal
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
- Bob Hickish
- Posts: 2283
- Joined: 23 Feb 2004 1:01 am
- Location: Port Ludlow, Washington, USA, R.I.P.
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
Thanks Bob!
Hard to make comments without having seen the guitar. Those 1st three pedals are much newer, but appear to have the closer spacing I referred to in the other thread, with pics, Old guitar! Pre-'63, or right around that time. String ball ends for rollers? Kinda hard to tell with the low rez pics. The fingerboards are correct. Before the F-tips, the wood necks "nipped" in where they met the keyhead, and the fretboards were nipped to match. Here's a pic of my '59 Perm, in which you can see how the neck meets the keyhead.
Looks like a nice old Perm to me! With the resto required though, way too much money. Woman shoulda grabbed the $1'500 and sprinted for the exit!
Hard to make comments without having seen the guitar. Those 1st three pedals are much newer, but appear to have the closer spacing I referred to in the other thread, with pics, Old guitar! Pre-'63, or right around that time. String ball ends for rollers? Kinda hard to tell with the low rez pics. The fingerboards are correct. Before the F-tips, the wood necks "nipped" in where they met the keyhead, and the fretboards were nipped to match. Here's a pic of my '59 Perm, in which you can see how the neck meets the keyhead.
Looks like a nice old Perm to me! With the resto required though, way too much money. Woman shoulda grabbed the $1'500 and sprinted for the exit!