Evans eighty amp

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans eighty amp

Post by Greg Turner »

Im thinking the reverb on my Evans eighty has stopped wOrking. If u move the amp, you can hear it making the noise. Any suggestions?? Thanks a lot!!
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

Have you checked the connections?
If you hear the thunder, the tank and the return both work.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans

Post by Greg Turner »

Well, I wouldn't know how to check the connections. I can try though. What should I look for?
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

Usually the tank is in a bag screwed to the bottom (sometimes the side) of the cabinet.
Turn the amp off.
Take those screws out, slide the tank out of the bag, and look at the RCA connectors. Look for broken wires, make sure they are plugged in.

Then turn the amp back on, and see if it's working.
Then you could check at the other end, but that's a bit more of a challenge.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans

Post by Greg Turner »

I will try that and get back to you. Thanks for your help!!!
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans

Post by Greg Turner »

I looked for what u said. I dont see anything close to what you're saying.
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

OK. I just looked at my FET500.
Evans didn't put the tank in a bag, nor is it on the bottom.
Look for a sheet metal rectangular box on the side of the cabinet, mounted vertically. Check the connectors, and pull them off and put them back on, with a twisting motion.
I'll take a pic shortly.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans

Post by Greg Turner »

I don't see any RCA connectors or anything that I can remove. I took a pic but can't upload bc I'm on my iPhone.
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

On the FET500, the tank is on the side, standing vertical. The two connectors are on the front of the tank, facing the baffle. You may wish to feel rather than take everything apart. I find it inconceivable that they wouldn't use the standard connectors.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans

Post by Greg Turner »

Feel free to text me pics lane. 513805 3812.
User avatar
Tim Marcus
Posts: 1671
Joined: 9 Nov 2005 1:01 am
Location: San Francisco, CA
Contact:

Post by Tim Marcus »

might be an internal digital reverb in there, in which case no tank
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Post by Greg Turner »

Yeah that's possible I guess [/i]
Greg Turner
Posts: 80
Joined: 13 Aug 2000 12:01 am
Location: Kennesaw, Georgia

Evans

Post by Greg Turner »

I found the tank. Check the connectors they seem to be fine. I'm wondering if there is a bad connection somewhere else. I guess Ill just use a pedal until then. Thanks for the help guys.
Post Reply