4th pedal suggestion
Moderator: Shoshanah Marohn
4th pedal suggestion
I was looking for some ideas about what to do with the fourth pedal on my ShoBud LDG. I currently have 4 pedals and 5 knees. Standard setup with LKV lowering 5 and 8 and LKR raising 1 to F# and lowering 6 to G. The fourth pedal is actually pedal 1 on the guitar. I have had it raising strings 1 and 2 now for about a year and really just don't ever use it except for a couple of "sugary" sounding licks. Any ideas??
- Jerry Hayes
- Posts: 7489
- Joined: 3 Mar 1999 1:01 am
- Location: Virginia Beach, Va.
I got a couple of suggestions. What I do is the same as Tom Brumley's set up which is to raise string 7 (F# to G#) and raise string 10 (B to C#). I use this pedal a lot and if you'll listen to a lot of Tom's stuff you'll hear it in his playing. Another thing I've seen players do is to lower both G#'s to G with pedal one. You get a nice full minor chord plus you can use it with the A pedal to get a good diminished chord position. I used to have this but I like the Brumley thing better. It's also a change that Bobbe Seymore has on his "Z" knee lever on another post.......
------------------
Livin' in the Past and the Future with a 12 string Mooney tuning.
------------------
Livin' in the Past and the Future with a 12 string Mooney tuning.
-
- Posts: 865
- Joined: 23 Feb 2001 1:01 am
- Location: Brekstad, NORWAY
- Terry Wendt
- Posts: 988
- Joined: 25 Mar 2002 1:01 am
- Location: Nashville, TN, USA
- Contact:
If the pedal is outside,
next to the A pedal
I would lower 6 G# to F#...
.....and take 7 with it from F# to F...
.....and take 9 up to D#.
[my opinion]
2pT
------------------
TheEarlyDays.com
and appearing regularly...
Jimmy Crawford/Russ Hicks... and Buddy Emmons on Bass! aLotOfSpace.com
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Terry Wendt on 30 May 2002 at 08:15 PM.]</p></FONT>
next to the A pedal
I would lower 6 G# to F#...
.....and take 7 with it from F# to F...
.....and take 9 up to D#.
[my opinion]
2pT
------------------
TheEarlyDays.com
and appearing regularly...
Jimmy Crawford/Russ Hicks... and Buddy Emmons on Bass! aLotOfSpace.com
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Terry Wendt on 30 May 2002 at 08:15 PM.]</p></FONT>
- Bobby Lee
- Site Admin
- Posts: 14863
- Joined: 4 Aug 1998 11:00 pm
- Location: Cloverdale, California, USA
- Contact:
For "Pedal Zero", I like:
lower 3rd G# to G
raise 5th B to C
raise 6th G# to A
I raise 7th F# to G on a lever. Combined with that pedal, I have an open C6th suitable for the head of any swing tune that uses C6th open strings (Steelin' the Blues, Remington Ride, etc.).
I know it's obscure, but I like it.
Some people I know lower both G#'s to G on their 0th pedal.
------------------
<small><img align=right src="http://b0b.com/b0b.gif" width="64" height="64">Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (F Diatonic) Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6)
lower 3rd G# to G
raise 5th B to C
raise 6th G# to A
I raise 7th F# to G on a lever. Combined with that pedal, I have an open C6th suitable for the head of any swing tune that uses C6th open strings (Steelin' the Blues, Remington Ride, etc.).
I know it's obscure, but I like it.
Some people I know lower both G#'s to G on their 0th pedal.
------------------
<small><img align=right src="http://b0b.com/b0b.gif" width="64" height="64">Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (F Diatonic) Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6)
- Terry Wendt
- Posts: 988
- Joined: 25 Mar 2002 1:01 am
- Location: Nashville, TN, USA
- Contact:
b0b,
I like that change! It is a similar one I have worked out on a 13 string single neck copedant. Now to get Fessy (and friends) to help me build it!
2pT
------------------
TheEarlyDays.com
and appearing regularly...
Jimmy Crawford/Russ Hicks... and Buddy Emmons on Bass! aLotOfSpace.com
I like that change! It is a similar one I have worked out on a 13 string single neck copedant. Now to get Fessy (and friends) to help me build it!
2pT
------------------
TheEarlyDays.com
and appearing regularly...
Jimmy Crawford/Russ Hicks... and Buddy Emmons on Bass! aLotOfSpace.com
- Larry Behm
- Posts: 4400
- Joined: 4 Aug 1998 11:00 pm
- Location: Mt Angel, Or 97362
- Doug Seymour
- Posts: 1039
- Joined: 4 Aug 1998 11:00 pm
- Location: Jamestown NY USA (deceased)
I contacted Bengt and asked about his suggestion of raising 6 G# -> A#. I couldn't really figure out a reason for it. Here is his replay (I hope he doesn't mind me posting it):
Hi Brad.
I'll try to explain the G#-A# whole step raise.
It is a change that I use in combination with other pedals/levers.
From open position you get an Achord when you press A&B pedal (strings 10 8 6 5 4 3)
or a F#minor7 on strings 7 6 5 4.
If the G#-A# pedal is to the left of the A pedal and you press both pedals you will
change th F# minor to a F#dom9 on strings 7 6 5 4 3.
Raising the 4 string E to F makes it a F#maj9 on the same strings.
Lowering the 4 string to Eb makes it a F#6 on strings 7 6 5 4
If you can split tune the G#-G lower on string 6 with the whole tone raise you can change between minor/dom7th on strings
7 6 5 4.
Playing two frets below open position makes lots of interesting licks using the
Apedal and the G#-A# in turns. Also in that position you have a b7th note string4, 6th
note string2, 9th note string 3 and root note string 7 & 1.
There is so many fun things to do with it that it is well worth a try.
The G#-A# will do the same in the A+F pos (3fret up Aped + E to F) as the A pedal itself would do in the open position.
Hope this helps.
Keep on steelin'
Bengt
I put this change on the pedal "0" yesterday and must say that I love it. I especially like the really low "bendable" notes you can get two frets back from open position with 9th string raise. There are a lot of really cool things to do with this change and they make sense, not just licks.
Now I need to figure out what to do with the other pull on this pedal. Any suggestions on that one? Right now it is raising 1, which is redundant as I alreay got that on RKL.
Hi Brad.
I'll try to explain the G#-A# whole step raise.
It is a change that I use in combination with other pedals/levers.
From open position you get an Achord when you press A&B pedal (strings 10 8 6 5 4 3)
or a F#minor7 on strings 7 6 5 4.
If the G#-A# pedal is to the left of the A pedal and you press both pedals you will
change th F# minor to a F#dom9 on strings 7 6 5 4 3.
Raising the 4 string E to F makes it a F#maj9 on the same strings.
Lowering the 4 string to Eb makes it a F#6 on strings 7 6 5 4
If you can split tune the G#-G lower on string 6 with the whole tone raise you can change between minor/dom7th on strings
7 6 5 4.
Playing two frets below open position makes lots of interesting licks using the
Apedal and the G#-A# in turns. Also in that position you have a b7th note string4, 6th
note string2, 9th note string 3 and root note string 7 & 1.
There is so many fun things to do with it that it is well worth a try.
The G#-A# will do the same in the A+F pos (3fret up Aped + E to F) as the A pedal itself would do in the open position.
Hope this helps.
Keep on steelin'
Bengt
I put this change on the pedal "0" yesterday and must say that I love it. I especially like the really low "bendable" notes you can get two frets back from open position with 9th string raise. There are a lot of really cool things to do with this change and they make sense, not just licks.
Now I need to figure out what to do with the other pull on this pedal. Any suggestions on that one? Right now it is raising 1, which is redundant as I alreay got that on RKL.
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
I like middle G# -> A# too and it is my pedal 0 on all my E9 necks. It is also a knee lever on my C6 as middle A -> B.<SMALL>I put this change on the pedal "0" yesterday and must say that I love it. </SMALL>
I suggest no other pulls on that pedal.<SMALL>Now I need to figure out what to do with the other pull on this pedal. Any suggestions on that one? </SMALL>