Sound-men and steel volume

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

User avatar
Dave Grothusen
Posts: 754
Joined: 16 Mar 2000 1:01 am
Location: Scott City, Ks

Post by Dave Grothusen »

Someone mentioned you do not want to make the sound man mad. This is true. I was told by one that "I can make or break the band". Bad attitude and he should have been looking for another job. Oh, he owned the sound company. Damn. At the time we needed him good or bad.
Last edited by Dave Grothusen on 18 Feb 2012 8:29 am, edited 1 time in total.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

This may not last. b0b, if it's too risque', then please pull. Just got it from an audio engineer friend in Nashville, and thought it was funny.

Image
User avatar
Gary Preston
Posts: 3995
Joined: 8 Apr 2003 12:01 am
Location: Columbus, Ohio, USA

Post by Gary Preston »

One thing about true friends they will be honest and not make excuses to pass the buck ! It takes a good ear to run sound and bring a good mix of all instruments and i know this as well as anyone else . A good sound man is worth his weight in gold . But they seem to be hard to find also . Just because someone tells you he is a sound man DONT believe him until you hear his work . And i do mean '' HEAR '' his work . G.P.
User avatar
W. C. Edgar
Posts: 724
Joined: 28 Feb 2005 1:01 am
Location: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, East Coast Soon!
Contact:

Post by W. C. Edgar »

I call sound men 'JACK OF ALL KNOBS guys'.
I have worked on big shows with tons of artists and here's my deal.
Some 'Jack of all knobs guys' will run the sliders on me as I play the show because they think they know where the steel needs to be heard. Other 'Jack of all knobs guys' will set my volume with my volume pedal down to the max and keep their grubby little hands off the sliders. I've been around and around with this also and the final word for me is 'set my max volume with my pedal down' and don't run the sliders on me and when you're supposed to hear the steel you will. Thats why it's called a 'volume pedal' for Christ's sake. But there will still be A-hole 'Jack of all knobs' guys out there that think they know it all. And that's why they're called 'Jack of all knobs'. If you get stuck on a show with one of these guys and someone in the audience says they can't hear you, point them to the Jack Of All Knobs. Oh and just for your information, the BEST sound man I ever had the pleasure of working with on the road was my friend Buddy Jennings (Waylon Jennings' oldest son). I remember a conversation we had on my first show with BNA Nashville Recording Artist BB Watson at a packed "Cowboys' in the Dallas area in 1992 when I asked 'are you running the sliders on me"? To which he replied 'hell no! thats what you have a volume pedal for. Thanks Buddy!
First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com
Mike Cass

Post by Mike Cass »

its a well known fact that the quietest thing onstage, whatever it is, will probably be the loudest thing in the house mix if the knob jockey notices that its there in the first place. Remember also that most of these fellows are not musicians, or else they'd be playing music for a living instead of riding the faders.
When I worked for Waylon Jennings we had a 115db stage, and directly behind me were Waylon's 2 Super Twin Reverb-behemoths with 2 TC choruses, 1 in each amp set to different sweeps and delay times, etc. I loved his sound but you couldnt cut rhrough that with a jackhammer. My amps were on either side of me facing into each ear and I used a monitor placed directly in front of me which I heard the digital piano and lead guitar in, but my onstage steel sound came from my amps only. I heard me in the house from time to time but after all it was a 115db stage....'nuff said about that.
Conversely, when I worked for Ray Price there were times that he had me turn down so low that I literally couldnt hear my amp. That was because I was playing too loud onstage as I didnt trust that I was getting in the house mix, which I wasnt, because I was playing too loud onstage because I didnt trust that I was getting in the house mix, which I wasnt, ad nauseaum.....Get the picture? It took me awhile to realize that it was the Ray Price Show, not Scotty's Convention :wink:
However, after a little consultation with Ray's son Cliff who does sound on most of their shows we came up with a solution we call "the bubble": at soundcheck Id be the last to go and Id set my amp volume where I could hear myself in the mains, but only faintly onstage. See, Ray usually stands a good bit out in front of the band and hears himself in his monitors and he hears the band in the house mix. When I was trying to fill a 10,000 seat auditorium with my little 45 watt Standel due to my ignorance of the logistical difficulties of miking all them violins, drums, gut-string guitar, an upright bass and usually an acoustic grand piano, I was taking Ray's head off, but damm, I needed to get that fat sound that I thought only came with a certain ammount of volume. Then as Cliff and I cogitated on a solution(before I found myself unemployed.....)I remembered how cool it is to play dobro on the 'Opry and hear yourself in the house...tone & presence bigger n' you-know-what.
When I took that frame of mind to playing electric steel guitar in Ray's band, things got much easier for me and believe it or not, sometimes Ray would tell me that I could be louder...imagine my surprise!
Besides, as much as I like what comes out of my Standel, that quality is amplified many times over by any decent PA system, and for me thats when playing music turns into the most fun you can have with yer clothes on.
Yeah, busy hands at the console can be irritating, but the less he has to fool with you, the better your chances are of being heard, at least in my experience.
While my credibilty on these issues can certainely be challenged, Ive heard enough of the YouTube vids of Ray's shows during my tenure to know that the bubble works, works well, and kept it sounding like the Ray Price Show and not me at a steel guitar convention trying to cram four pounds of Emmons & Day licks into a one pound bag, such as I did when I started there.
User avatar
Gary Preston
Posts: 3995
Joined: 8 Apr 2003 12:01 am
Location: Columbus, Ohio, USA

Post by Gary Preston »

:D Great analogy Mike . This is a problem in a lot of bands i think ! With me it's not the idea that i want to heard over any other player but i just want to be in the mix so others can hear what i am playing ( good or bad ) ! I only play up to the volume of the monitors or somewhere close . I don't think it's mean to ask to hear the other players and singers in the monitors ! After all you need to know whats going on to be able to play your part in time with the band ! To me it's that simple then when the sound man makes a stupid remark like '' Steel Players ''can't hear anyway i get a little upset ! My 2 cents . G.P.
User avatar
steve takacs
Posts: 5499
Joined: 4 Aug 1998 11:00 pm
Location: beijing, china via pittsburgh (deceased)

soundguy [eceptions

Post by steve takacs »

John Billings... that was great! I've copied that in case it gets "redacted". Thanks, stevet
User avatar
Tony Prior
Posts: 14522
Joined: 17 Oct 2001 12:01 am
Location: Charlotte NC
Contact:

Post by Tony Prior »

I play a gig on a big stage where the sound guy wants me to use two amps, one for guitar and one for Steel , he can't get the mix right supposedly. A Twin with a Telecaster and a Steel. I ran this by another sound guy at another club and he laughed...he said..that's what the knobs are for !

I'm not bringing two amps...

t
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 8 and Pro Tools 12
jobless- but not homeless- now retired 8 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
User avatar
Scott Henderson
Posts: 2245
Joined: 9 May 2003 12:01 am
Location: Camdenton, Missouri, USA

Post by Scott Henderson »

WC is spot on regarding the attitude 95% of the time and the solution. When I was on the road and we hit a new club I would by the "jockey" a drink and explain how I wanted it done....(like WC said to do it) If that didn't work I would take a leg off my guitar go to the board and say " Did I ever tell you my lifetime batting average is .346?" Seemed to get my point across. It's live sound 101... Set it and forget it...
D-10 JCH Dekley U-12 D-8 Magnatone Mullen RP Evans RE 200 profex 2 BJS bars
Dentyne gum (peppermint)
User avatar
Alan Tanner
Posts: 461
Joined: 25 Nov 2007 8:13 am
Location: Near Dayton, Ohio

Post by Alan Tanner »

This has been a very interesting thread to follow. Even if you don't have a sound man, it is hard to get things just right. Rooms that have "hot" spots, really poor acoustics, Billy Bob's wife complaining she can't hear him, somebody sitting right in front of one of the P.A. speakers bitching that the "band" is too loud. Groups that I have played with that have a sound man always seem to be kind of a crap shoot. I believe it is mostly from the fact that the sound man really doesnt know WHAT to do with the steel guitar, and is used to screaming over driven instruments that he has to "control". Nothing worse than a rocker trying to mix a country band...
User avatar
Gary Preston
Posts: 3995
Joined: 8 Apr 2003 12:01 am
Location: Columbus, Ohio, USA

Post by Gary Preston »

:eek: Let me add this one if i may . How about a sound man that had a motorcycle wreck and is totally deaf in his left ear and is real hard of hearing in the other ear !!! I just had this happen to me . Then he said that steel players can't hear anyway !!! :x Believe me i am telling you the 100% truth ! Then he told me he could get the same tone and dynamics from the soundboard that i get from my Nashville 400 Steel Amp . Needless to say he didn't run me straight through the board . I had him mike my amp . He wasn't a happy camper :\ Oh by the way he doesn't run sound anymore ! At least not for us ! :wink:
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

We were lucky! We had a great soundman! People would come up and say, "It's as good as listening to a CD."
User avatar
Gary Preston
Posts: 3995
Joined: 8 Apr 2003 12:01 am
Location: Columbus, Ohio, USA

Post by Gary Preston »

John you need to come and play at our steel jams !
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Alas Gary, my fingers are starting to curl up with tendon problems. Runs in the family. I don't play much anymore, because of the frustration. I'm still restoring though.
Paul Carestia
Posts: 38
Joined: 6 Apr 2009 7:18 pm
Location: Colorado, USA

Post by Paul Carestia »

I had the pleasure of being able to hear Brent Mason and the Players at a Guitar Show in Copper Mountain, Colorado a couple of years ago. Paul Franklin was there with him obviously.

Well, to my utter dismay, my disgust, my anger they had Paul so low in the mix you couldn't even hear his solo's.

I confronted the sound guys on behalf of the few steel players in the audience. All I got was a blank stare. Most sound guys are clueless when it comes to steel guitar. It's such a shame. And it's so simple. Vocals out front, lead instruments next, drums and bass set the floor on volume.

I've learned long ago to play for myself and how I sound on stage. That's all I can control.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

And never tell the soundman it's a volume pedal. " No! It's an "Expression" pedal. Like on a Hammond. You know?"
Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

That's why we carried our OWN sound man. Most don't have a clue about steel guitar.
Chuck Hayes
Posts: 37
Joined: 8 Feb 2012 10:28 am
Location: Missouri, USA

Post by Chuck Hayes »

As a lead guitar player I've had my share of go arounds with sound men, they don't understand dynamics or how to reproduce a clean tone.
Stage One, Session 400, Enie Ball Jr, 1978 Tele, Fender 65 Reissue Deluxe Reverb, Wampler and Carl Martin pedals
David Ellison
Posts: 205
Joined: 5 Jan 2011 8:15 pm
Location: California, USA

Post by David Ellison »

I think its probably not the soundman's fault, it's the band's. If you're playing with a guitar player who only plays at one volume for both rhythm and lead (like most rock players do), how is the soundman supposed to find a good mix?

I played in bands where the only other lead instrument was electric guitar. I always tried to stress that the guitar player had to get out of the way when I came in... that means turning his guitar WAY down if he's going to play rhythm. The guitar player should play with as much dynamics as the steel player does. To me, the lead instruments should take turns playing fills behind the singer... each one playing a verse, then backing off or laying out entirely. Country players always understood, rock players NEVER did. New country is played more like rock music, so I would assume it's harder to mix... you can't blame the soundman for that, though.
Jackie Anderson
Posts: 512
Joined: 17 Jun 2002 12:01 am
Location: Scarborough, ME

Post by Jackie Anderson »

Dan, if you are still following this thread that you started, and in case you weren't at the Bayside Bowl in Portland last night, you will be pleased to know that the soundguy du jour did a great job on the band ("Big Ass Rooster") in a tough room (the noise from the adjacent bowling lanes doesn't help) -- and you could actually hear our friend Cartwright Thompson loud and clear (of course the tele player still had 5 or 6 db on him)! That P/P sounded great. Be sure to catch the next "Too Broke To Be This Drunk" show.

Jack
Gene Jones
Posts: 6870
Joined: 27 Nov 2000 1:01 am
Location: Oklahoma City, OK USA, (deceased)
Contact:

Post by Gene Jones »

All of the above is so relevant. My years of combat with sound engineers is responsible for most of my grey hair. Most of them "mix" according to their experience and prejudices, and a steel guitar always comes in last.

I admit to minimizing my volume pedal when asked for my expected maximum volume. Otherwise, I didn't have a level playing field.

Sound engineers have a horror of any musician having control of their volume and tone.
User avatar
Gus York
Posts: 89
Joined: 18 Feb 2009 12:10 pm
Location: Devon, UK
Contact:

sound problems

Post by Gus York »

The best live sound I EVER heard was at a brilliant POCO concert here in the UK in the 70's, Rusty Young and the rest of the band were mixed to perfection for
the audience-what it was like to the boys on stage I haven't a clue? But they all looked pretty happy. You'd think we would have pinned it all down by now and every player would be happy, especially the poor old misunderstood steel player! - WRONG?

I joined a Dire Straits tribute band around three years ago and had the wonderful experience of a 'sound' man (no way was he sound) who had no working ears, and had never worked with a steel before! When I said that the way the steel should be heard was to take a good listen to the Dire Straits concerts with Paul Franklin, he calmly mentioned he had NEVER listened to any of their concerts with steel or without steel?? Now that's a true pro! Not that he could have got it right anyway!

Friends who came to see the band and me especially never heard a note I played, in fact they actually wondered if my amp was ON? This was confirmed after a live recording was made on a gig, and well, for the amount you could
hear me, the steel might as well have stayed in the case!! (I was DI'd by the way)

It finally came down to 'It's either him or me who goes' fortunately for me it was him! After all that time trying very hard to pin down some Franklin licks (which
I mostly couldn't do) I wasn't going that easily anyway!

Thankfully we finally employed a real 'sound' guy and EUREKA! I could suddenly hear myself- and the audience could too ! Mind you - I think some of the punters preferred the previous 'unsound' man!?
Nice ZUM 12 D9 2 Roland Cubes,+ various effects and bits.
Dale Rivard
Posts: 370
Joined: 22 Jan 2006 1:01 am
Location: Ontario, Canada

volume pedal issue with some sound people?

Post by Dale Rivard »

I usually don't get in on these type of conversations, but after getting back from Nashville not long ago, I feel the need to vent.

My wife and I saw Paul Franklin with The Time Jumpers at the Station Inn on Monday night and then the next night at the Ryman. At the Station Inn, I could hear his solos and fills great. We were sitting right at the back and right beside the sound board.(almost center stage) But being it`s a small room, I suspect some of the steel sound I was hearing was coming off the stage fom Paul`s rig. The next night at the Ryman was a different story. Many times Paul would be half way through his solo before he would be up in the mains. I know this because I could faintly hear his on stage sound and then part way through his lead he would be in the mix. Some of his fills were distant or not in the mix at all. We were sitting main floor about half way back and almost center stage. None of the other instruments had this issue. By the way, what I did hear, Paul played and sounded (tone-wise) awesome.

As a player, I try to give the sound person the best on stage sound I can give them. Then it`s out of my hands. As a listener, it can be very frustrating. I just don`t understand why some sound people can`t trust and give the steel player that needed volume. :? Especially when it`s a world class player like Paul.

I guess I just expected more being it`s the Ryman in Nashville. But it won`t stop me from going again.

Okay, I feel better now.
User avatar
Jake Hoffman
Posts: 72
Joined: 30 Jul 2007 12:59 pm
Location: Idaho, USA

Post by Jake Hoffman »

Played a gig at the Knitting Factory in Reno last year opening for Travis Tritt. Soundman spent 20 minutes on the drum kit and 3 minutes on my steel. The beat goes on.
User avatar
Dave Grafe
Posts: 4457
Joined: 29 Oct 2004 12:01 am
Location: Hudson River Valley NY
Contact:

Post by Dave Grafe »

This thread sounds very much like the stuff that good sound techs say about steel guitarists....

FYI, It's a lot harder to get mic'ed drums to fit cleanly into a mix than it is to do with a steel guitar. A LOT harder in fact, so be glad the guy cared enough to take the time to work on it.

Just in case you were wondering, in actual concert experience, if the drums and vocals sound good at the top of the show the audience will be happy enough while the rest of the mix gets tweaked into shape. If the drums and vocals suck up front but the steel guitar sounds good who will be happy? We love our steel guitars but let's get real, for a competent arranger, producer or engineer they are very seldom the singular focus of the music. Just chill out and do your best, if it sucks there will be another gig that doesn't....
Post Reply