changing strings/tuning pedals/levers
Moderator: Shoshanah Marohn
-
- Posts: 137
- Joined: 28 Oct 2011 1:19 pm
- Location: Lake Charles, LA, USA
changing strings/tuning pedals/levers
Could anyone tell me where I could find a video tutorial on changing pedal steel strings and tuning the pedals and levers? I did find one video on how to change strings on youtube, but it was hard to see some of what the guy in the video was doing.
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron
©Jason Bergeron
- David Beckner
- Posts: 1574
- Joined: 5 Feb 2007 2:56 pm
- Location: Kentucky, USA
- Contact:
video
Jason
I have a video that I made last year . I was in Texas at Jim Lindsey's house and he changed the strings, tweaked and tuned an old ShoBud that I had at the time.I picked up the cam corder and taped this for my own reference. He did alot of explaining about the how's and why's of what he was doing. I will have to find it again , but I will gladly make you a copy.
I have a video that I made last year . I was in Texas at Jim Lindsey's house and he changed the strings, tweaked and tuned an old ShoBud that I had at the time.I picked up the cam corder and taped this for my own reference. He did alot of explaining about the how's and why's of what he was doing. I will have to find it again , but I will gladly make you a copy.
WILCOX SD10 (love the white mica)
WALKER SEAT
NASHVILLE 400
BEHRINGER RACK TUNER
CUSH CASE RACK
PEAVEY DELTA FEX
PARTS CASTER.Gospel and Classic Country Music
http://www.dbupholstery.yolasite.com
WALKER SEAT
NASHVILLE 400
BEHRINGER RACK TUNER
CUSH CASE RACK
PEAVEY DELTA FEX
PARTS CASTER.Gospel and Classic Country Music
http://www.dbupholstery.yolasite.com
-
- Posts: 137
- Joined: 28 Oct 2011 1:19 pm
- Location: Lake Charles, LA, USA
guitar
Mine is a 1981 D10 Sho-Bud Super Pro; I have 5 knee levers (came with 6) and 8 pedals.
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron
©Jason Bergeron
I think by 81 they were using the groove rather than the post.
You'll fish the ball into the groove and pull up on it, keeping tension on the string. Did you let go of the string, it will fall down out of the groove. Put the other end in the tuner and tighten it up like any other string.
To tune it, tune all of the open strings at the keyhead. and then you tune your changes with the nylon nut. since you have an all pull guitar with one pullrod for each change, the order you tune the changes does not really matter. Some work their way from left to right along the guitar, I usually work from 1st string to tenth at the changer, working my way down each string.
You'll fish the ball into the groove and pull up on it, keeping tension on the string. Did you let go of the string, it will fall down out of the groove. Put the other end in the tuner and tighten it up like any other string.
To tune it, tune all of the open strings at the keyhead. and then you tune your changes with the nylon nut. since you have an all pull guitar with one pullrod for each change, the order you tune the changes does not really matter. Some work their way from left to right along the guitar, I usually work from 1st string to tenth at the changer, working my way down each string.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
- Posts: 137
- Joined: 28 Oct 2011 1:19 pm
- Location: Lake Charles, LA, USA
attaching strings
I removed the last string on my C6 neck to see how to attach it onto the guitar and I'm having difficulty getting it to hook. I even tried using a flat screw diver to get it in but no luck. I know that this can't be that difficult. Any idea what I'm doing wrong?
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron
©Jason Bergeron
if you mean the 10th, the heaviest one, you unwittingly picked the hardest one, because it just barely fits in the slot.
Try the first string. it'll help the first few times to either hold a flashlight in your left hand or use a head-mounted flashlight. Hold the string so the hole in the ball points to the finger; angle the string diagonally backwards (like put the edge of your hand on the endplate), push it slowly down the finger til you see/feel it find the groove. The thinner strings have an easier time of it, but by the time you've done 8, you should have enough of a grasp that the last two should go OK
Try the first string. it'll help the first few times to either hold a flashlight in your left hand or use a head-mounted flashlight. Hold the string so the hole in the ball points to the finger; angle the string diagonally backwards (like put the edge of your hand on the endplate), push it slowly down the finger til you see/feel it find the groove. The thinner strings have an easier time of it, but by the time you've done 8, you should have enough of a grasp that the last two should go OK
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
- CrowBear Schmitt
- Posts: 11624
- Joined: 8 Apr 2000 12:01 am
- Location: Ariege, - PairO'knees, - France
- Contact:
- John Swain
- Posts: 1576
- Joined: 12 Feb 2000 1:01 am
- Location: Newberry,SC
-
- Posts: 137
- Joined: 28 Oct 2011 1:19 pm
- Location: Lake Charles, LA, USA
strings
I think I was able to out smart those tricky last strings and hook them in right. I had to stand by the changer end of the guitar, fish the ball end into it and when I pulled up, it hooked like it was supposed to. Odd but at least it's in there.
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron
©Jason Bergeron
Lane,
Not to be a smart a$$ but, easier to do #1-#5, then #10- #6.
Jason,
Do a search on changing strings, lots of good info.Or look here.
http://steelguitar.com/strings.html
Not to be a smart a$$ but, easier to do #1-#5, then #10- #6.
Jason,
Do a search on changing strings, lots of good info.Or look here.
http://steelguitar.com/strings.html
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
Steeling for Jesus now!!!
Hmmm. I'd never thought about working outside in. I'll give it a whack. Although I did think that the first time learning to put 'em into the groove, that big 68-70 should be last, since it just barely fits
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
- Posts: 137
- Joined: 28 Oct 2011 1:19 pm
- Location: Lake Charles, LA, USA
-
- Posts: 103
- Joined: 18 Apr 2000 12:01 am
- Location: Fort Madison, Iowa
trick to hold string in the changer
After I put the string in the groove, I stick an old worn out toothbrush in the changer to hold the string in place. The worn out bristles have just enough spring left in them to hold the sting and free up both hands for the rest of the chore. Works with a groove or a peg.
Ed
Ed
60? Typically I see either 68 or 70 for the low C and a 54 on the F. If the C is 60, what do you use for the F?Jason Bergeron wrote:The biggest string that I use on the E9h is a 38 and a 60 on the C6th.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
-
- Posts: 137
- Joined: 28 Oct 2011 1:19 pm
- Location: Lake Charles, LA, USA
strings
Well, a friend of mine fixed my guitar and put new strings on it. I'm not sure what gauges he used. The gauges I mentioned are the ones that my deceased father used. He played Cajun music, so I assume he used different gauges than other musicians.
He used the G7th tuning on the C6 neck. The tuning is G, D, B, G, E, D, G, B, E, G. The gauges are: .011 plain, .013 plain, .017 plain, .024 wound, .030 wound, .036 wound, .042 wound, .048 wound, .054 wound, .060 wound.
He used the E9th "Nashville" tuning on the E9th neck. The tuning is F#, D#, G#, E#, B, G#, F#, E, D, B. The Gauges are: .013 plain, .015 plain, .010 plain, .014 plain, .018 plain, .022 plain, 0.26 wound, 0.30 wound, 0.34 wound, 0.38 wound.
He used the G7th tuning on the C6 neck. The tuning is G, D, B, G, E, D, G, B, E, G. The gauges are: .011 plain, .013 plain, .017 plain, .024 wound, .030 wound, .036 wound, .042 wound, .048 wound, .054 wound, .060 wound.
He used the E9th "Nashville" tuning on the E9th neck. The tuning is F#, D#, G#, E#, B, G#, F#, E, D, B. The Gauges are: .013 plain, .015 plain, .010 plain, .014 plain, .018 plain, .022 plain, 0.26 wound, 0.30 wound, 0.34 wound, 0.38 wound.
Sho~Bud Super Pro, Peavey Nashville 400
©Jason Bergeron
©Jason Bergeron