Two Questions, Who is playing and is it a Lap Steel
Moderator: Brad Bechtel
-
- Posts: 714
- Joined: 10 Jan 2006 1:01 am
- Location: Montello Wisconsin, USA
Two Questions, Who is playing and is it a Lap Steel
I was up on UTUBE a moment ago and ran across an old Hank Snow song called "Crying Seel Guitar" Who is playing on steel and is it a Lap Steel. There was just a black and white still picture, no video. His later videos his steel player is on a PSG.
Wayne D. Clark
Melbert 8 console
Peavy110
Goodrich Pedal
Wayne D. Clark
Melbert 8 console
Peavy110
Goodrich Pedal
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
Hank Snow had a couple of lap steel players. One was Kayton Roberts, I'm not much for identity by sound but I'll try to find the song and take a guess.
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
Sure sounds like Kayton, he is a great harmonic player, but then Hank hired Kayton on later in his career because he could play like Hanks old steel player, but his name escapes me at the moment. Someone else may be more positive.
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
-
- Posts: 714
- Joined: 10 Jan 2006 1:01 am
- Location: Montello Wisconsin, USA
Thanks Mark. Checked your [34] web sight Nice. listened to Big River, nice sound. I grew up in Madison, Went to East. Get down that way to do a little shopping now and then. When I was in Highschool a friend of mine played rhythm and sang and I had an National New Yorker lap steel. We did a lot of H. Snow Tunes, He had the voice for it, and I loved the steel players licks. Success to you.
w
w
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
Thanks Wayne
http://www.youtube.com/watch?v=RHeUth2w ... re=related
Here is a clip that shows a guy playing a Fender single neck. It is on the last bit of the song for about 5 seconds. It isn't Kayton Roberts but it is that sound.
Wayne, do you gig around much?
http://www.youtube.com/watch?v=RHeUth2w ... re=related
Here is a clip that shows a guy playing a Fender single neck. It is on the last bit of the song for about 5 seconds. It isn't Kayton Roberts but it is that sound.
Wayne, do you gig around much?
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
-
- Posts: 501
- Joined: 1 May 2009 1:06 pm
- Location: Portland Oregon, USA
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
Joe Talbot is the guy I was trying to remember. Joe and Kayton have similar styles. Don't know what years they played with Hank, do you?
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
- Ray Montee
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- Contact:
A great question...................
I don't know who it was playing the Fender there on You Tube.......
But there is a recording of "Crying Steel Guitar" with Hank Snow vocal......
The steel you hear is JERRY BYRD playing in his C-Diatonic Tuning....
But there is a recording of "Crying Steel Guitar" with Hank Snow vocal......
The steel you hear is JERRY BYRD playing in his C-Diatonic Tuning....
-
- Posts: 714
- Joined: 10 Jan 2006 1:01 am
- Location: Montello Wisconsin, USA
Good Morning Mark, Thanks for that link, Boy did that bring back a memory. From the Stage of Madison East High School's talent night. In answer to your question, no, play at church once in a while with my wife. Other than that it is at home for my own entertainment. Trying to get my brain around [C6th]. By the way are you affiliated with the music store on Johnson Street? don't know the address but only the location. It's been a while since I was there.
Ray that clip Snow did on the Tube may have been the one I ran across last night.
Have a good day and thanks for the info. If your going to Steel best to do it on a Guitar.
w
Ray that clip Snow did on the Tube may have been the one I ran across last night.
Have a good day and thanks for the info. If your going to Steel best to do it on a Guitar.
w
Sounds like Jerry Byrd to me.
http://www.youtube.com/watch?v=LMBFkXbx1QE
ray can you talk a little about the C Diatonic tuning? I want to give it a try.
http://www.youtube.com/watch?v=LMBFkXbx1QE
ray can you talk a little about the C Diatonic tuning? I want to give it a try.
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
Was Jerry Byrd on the recording as a studio player or did he have a regular gig with Hank Snow for a while?
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
Jerry wasn't a touring musician--he was a studio player doing radio and TV shows and record dates. They were 2 distinct sets of musicians, as I remember Frankie Kay telling me in my interview with him. In many of the cases (particularly in Nashville) the studio musicians were used for the recordings. That's why so many guys like Frankie are not heard on recordings from those days.
Last edited by Mike Neer on 27 Jan 2012 9:27 am, edited 1 time in total.
- Jerome Hawkes
- Posts: 1385
- Joined: 8 May 2009 7:16 am
- Location: Fayetteville, North Carolina, USA
i'd like to know also - this sounds like the kind of backing JB did later on in the mid-50's when he "had to" adapt a more pedalistic sound, so it might be C dia.
of course, Ray is #1 Jerry Byrd historian, so I trust his ears.
- this was a pretty popular tune also, I've heard it covered by a few artists
someone has posted on the comments it was Kayton, but I think this was before his tenure (seems like he joined Snow in the mid-60's)
of course, Ray is #1 Jerry Byrd historian, so I trust his ears.
- this was a pretty popular tune also, I've heard it covered by a few artists
someone has posted on the comments it was Kayton, but I think this was before his tenure (seems like he joined Snow in the mid-60's)
'65 Sho-Bud D-10 Permanent • '54 Fender Dual-8 • Clinesmith T-8 • '38 Ric Bakelite • '92 Emmons D-10 Legrande II
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
I remember reading a Kayton Roberts interview in Andy Volks book that he got hired on because his style was very much like Joe Talberts, Hanks old player from the non pedal days. It would appear Hank prefered that nonpedal style of player to the pedal style. Having Jerry Byrd on some of his recordings seems to indicate that too.
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
- Ray Montee
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- Contact:
About Hank Snow and Jerry's C-Diatonic tuning.............
As most of you know, JERRY BYRD did several albums with Hank Snow as a studio musician only. At one time, Jerry was the busiest steel player in all of Nashville.
In answer to your question Mark, JERRY BYRD was a studio musician only while there in Nashville. He left the Ernest Tubb band after only about three months during 1948-49 as the road work was simply too much for Jerry since he was running on only one lung and he tired easily. Jerry did participate in Tubbs' movie "Hollywood Barn Dance". Leaving Tubb, he opted for the less stressful Grand Old Opry spot with Red Foley's Prince Albert Show.
Mike...about the C-Diatonic Tuning.... Details about it can be found on www.JerryByrd-FanClub.com site. Jerry has stated that his first 'commercial' use of that new tuning was on Ferlin Husky's "NEXT to JIMMY" Capitol release. Thereafter, that tuning was easily identifiable on nearly all of Jerry's records and his playing on the records of hundreds of major artists as well as radio/television shows of Bobby Lord, Hawkshaw Hawkins, Ernie Lee and others.
That tuning holds on to many of his original C6th signature sounds but ads an entirely new and expanded dimension to his playing. A sharp ear can easily identify this tuning when it is strummed. Jerry produced prior to his death, tabs for about a dozen tunes using that new tuning. Scotty has these plus a list of more than one hundred other songs in various tunings/tabs used by Jerry Byrd. This is the real stuff, not someone else's interpretation.
In answer to your question Mark, JERRY BYRD was a studio musician only while there in Nashville. He left the Ernest Tubb band after only about three months during 1948-49 as the road work was simply too much for Jerry since he was running on only one lung and he tired easily. Jerry did participate in Tubbs' movie "Hollywood Barn Dance". Leaving Tubb, he opted for the less stressful Grand Old Opry spot with Red Foley's Prince Albert Show.
Mike...about the C-Diatonic Tuning.... Details about it can be found on www.JerryByrd-FanClub.com site. Jerry has stated that his first 'commercial' use of that new tuning was on Ferlin Husky's "NEXT to JIMMY" Capitol release. Thereafter, that tuning was easily identifiable on nearly all of Jerry's records and his playing on the records of hundreds of major artists as well as radio/television shows of Bobby Lord, Hawkshaw Hawkins, Ernie Lee and others.
That tuning holds on to many of his original C6th signature sounds but ads an entirely new and expanded dimension to his playing. A sharp ear can easily identify this tuning when it is strummed. Jerry produced prior to his death, tabs for about a dozen tunes using that new tuning. Scotty has these plus a list of more than one hundred other songs in various tunings/tabs used by Jerry Byrd. This is the real stuff, not someone else's interpretation.
- Mark Roeder
- Posts: 895
- Joined: 25 Sep 2007 11:22 am
- Location: Milwaukee, Wisconsin, USA
Thank you for your insight Ray, looking forward to hearing you at the TSGA.
www.deluxe34.com lap steel stands, Clinesmith, Gibson Console Grande, Northwesterns, The Best Westerns
https://www.facebook.com/TheBestWesterns
https://www.facebook.com/TheBestWesterns
- Ray Montee
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- Contact:
About the REALLY BIG SHOW in Texas...................
Your kind words are appreciated Mark, I assure you.
However, I will not be able to attend this years annucal event which has come as a big disappointment.
I was so looking forward to it.
Please, enjoy it for my benefit. THANKS again.
However, I will not be able to attend this years annucal event which has come as a big disappointment.
I was so looking forward to it.
Please, enjoy it for my benefit. THANKS again.
-
- Posts: 219
- Joined: 16 May 2005 12:01 am
- Location: Mississippi, USA
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 3740
- Joined: 29 Oct 2002 1:01 am
- Location: Saginaw, Michigan, USA (deceased)
- Don Kona Woods
- Posts: 2726
- Joined: 11 Dec 2004 1:01 am
- Location: Hawaiian Kama'aina