~~*Clip On Mic & Chart stands*~~

Al Risbeck · Post by **Al Risbeck** » 13 Nov 2011 7:19 pm

Here's a pic of it clipped on a tone bar the same size as a standard steel guitar leg. Hope this explains it. It just snaps on tightly.

thanks for asking

AL

Bob Snelgrove · Post by **Bob Snelgrove** » 13 Nov 2011 8:17 pm

Al Risbeck wrote:Here's a pic of it clipped on a tone bar the same size as a standard steel guitar leg. Hope this explains it. It just snaps on tightly.

thanks for asking

AL

That's great, Al.. Very simple.

bob

Al Risbeck · Post by **Al Risbeck** » 13 Nov 2011 8:40 pm

Well you have heard about simple minded folks
Al

John McClung · Post by **John McClung** » 14 Nov 2011 1:54 pm

Al, can you estimate how much weight the music stand can hold before it falls off? I sometimes work with binders of sheet music, not hugely heavy, but do need something that can hold a 3 ring binder, up to 50 sheets of paper, and my clip-on reading light (it's just a few ounces).

Thanks!

Al Risbeck · Post by **Al Risbeck** » 14 Nov 2011 7:14 pm

Hello John, I have put a full ream of paper on it to test it and it held fine. you are able to rotate the clip so it isn't a straight push off and that would help also.

AL

Howard Hughes · Post by **Howard Hughes** » 19 Nov 2011 1:39 am

^^^TTT^^^

Great Products & Great Guy To Deal With

Thanks For Looking

, ♫Howie♫ For ♫Al♫

Randy Cook · Post by **Randy Cook** » 22 Nov 2011 1:12 pm

I just got mine a few weeks ago....I love it....less clutter on stage and solid as a rock!

Matthew Schwartz · Post by **Matthew Schwartz** » 22 Nov 2011 6:35 pm

I just got my mic stand today and used it tonight for a gig. I love it. It works great! Thanks Al.

Al Risbeck · Post by **Al Risbeck** » 6 Dec 2011 6:11 am

Thanks for the feedback Matthew, glad you like it

AL

Al Risbeck · Post by **Al Risbeck** » 10 Dec 2011 8:21 am

Mike Archer · Post by **Mike Archer** » 14 Dec 2011 4:56 pm

Al makes great products
ive got some myself and am very pleased with his
products Mike

Bruce Hilton · Post by **Bruce Hilton** » 15 Dec 2011 4:03 am

All you folks with old Fender steels will be glad to know that the thicker legs (1" vs. 3/4") are not an issue. Al has a modified version of his mic/music stands that fits perfectly with Fender legs. What a great product!! Worth every penny! Thanks, Al!

Al Risbeck · Post by **Al Risbeck** » 29 Dec 2011 7:42 am

Jim Palenscar in Oceanside CA has these in stock so you can pick them up out there.

Thanks

Al

Al Risbeck · Post by **Al Risbeck** » 5 Aug 2012 10:27 am

bump they are available again

al

Howard Smith · Post by **Howard Smith** » 6 Aug 2012 12:22 am

Al I sent you a PM.

HS

Al Risbeck · Post by **Al Risbeck** » 18 Aug 2012 12:09 pm

Saturday bump

Howard Smith · Post by **Howard Smith** » 18 Aug 2012 12:53 pm

Just wanted to post a short endorsement for Al's Music & Mic Stands. Both great products that work great, and really reduce the footprint of your setup, at a very reasonable price. I highly recommend them, and his service, second to none.

Al Risbeck · Post by **Al Risbeck** » 20 Aug 2012 4:07 am

Thank you Howard for the kind words.

Al

Al Risbeck · Post by **Al Risbeck** » 20 Aug 2012 12:27 pm

Sam I tried to respond to your email and got "action failed" response

Al

Loren Bayles · Post by **Loren Bayles** » 23 Aug 2012 10:07 am

Hey Guys and Gals,

I have all of Al's products and whether it is the drink holder, the Music stand, Mic-Boom holder, etc. they all work great and are so nice to have at your disposal. I take them all with me to jams as well as gigs. So helpful and easy to use. Thanks Al.

LB

Loren Bayles · Post by **Loren Bayles** » 24 Aug 2012 8:43 am

TTT for a good guy and great,useful products.

Keep 'em coming Al.

LB

Al Risbeck · Post by **Al Risbeck** » 1 Sep 2012 4:54 am

Thanks for all the positive support.

Al

The Steel Guitar Forum

Clip On Mic & Chart stands

Clamp on

Re: Clamp on

simple

Chart stand

Clip On Mic & Chart stands

Mic stand

Thanks

ttt

great products

California available

ttt

up

Thanks

email

Al's accessaries

Al's accessaries

Thanks