Over lubricating your steel
Moderator: Shoshanah Marohn
-
- Posts: 3618
- Joined: 27 Mar 2003 1:01 am
- Location: Lake Charles, Louisiana, USA
Over lubricating your steel
Most of us know the results of too much lubrication on our steels. For those possibly new to maintenance, please know that spray lubes will have a very negative impact! The previous owner of a guitar I recently purchased used a great deal of spray on lube on every part of the guitar. I've had to totally dismantle the guitar and clean every part as the changer assenbly was gummed up and grit, grime, and dust bunnies had collected in all parts. I could literally not touch any part of this guitar without my hands looking like the pic. That was from picking up the black pull rods that are covered in lube. I've only seen one guitar worse than this one that I rebuilt and it was so gummed up it wouldn't even return any pulls.
- richard burton
- Posts: 3846
- Joined: 23 Jan 2001 1:01 am
- Location: Britain
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
I can sympathize with you, David.
Looks like it might have been spray-on graphite. That stuff, and WD40, should be illegal to use on steel guitars!! Talk about gumming up the works! WOW
I got a steel like that with graphite caked in the changer and crossrod pivots, and I, too, had to completely disassemble it and clean everything just so the crossrods would rotate. What a mess it was. Now it plays great, looks great, and I love it.
I know you'll make that guitar play great, David. You've got the touch.
Looks like it might have been spray-on graphite. That stuff, and WD40, should be illegal to use on steel guitars!! Talk about gumming up the works! WOW
I got a steel like that with graphite caked in the changer and crossrod pivots, and I, too, had to completely disassemble it and clean everything just so the crossrods would rotate. What a mess it was. Now it plays great, looks great, and I love it.
I know you'll make that guitar play great, David. You've got the touch.
Best regards,
Mike
Mike
- Dave O'Brien
- Posts: 1583
- Joined: 23 Feb 2002 1:01 am
- Location: Florida and New Jersey
- Contact:
ugh
Looks as bad as the red MSA "The Universal" I rebuilt last spring...what a mess that was.
You should see it now though.
You should see it now though.
Dave O'Brien
Emmons D-10, CMI D-10, Fender Deluxe Reverb, PV 112, Fender Pro Reverb
www.myspace.com/daveobrienband
Emmons D-10, CMI D-10, Fender Deluxe Reverb, PV 112, Fender Pro Reverb
www.myspace.com/daveobrienband
- Lee Baucum
- Posts: 10326
- Joined: 11 Apr 1999 12:01 am
- Location: McAllen, Texas (Extreme South) The Final Frontier
About 25 years ago I rebuilt an MSA for a young man. It had been played in bars for a long, long time. It looked like the previous owner would just turn it upside down every so often and spray everything with WD-40. It was all black and sticky, with a build up of all kinds of sludge, smoke, and Lord know what else.
Oddly enough, I used WD-40 to clean all the parts. It cut it all off. Naptha finished the cleaning process.
Oddly enough, I used WD-40 to clean all the parts. It cut it all off. Naptha finished the cleaning process.
- Chris Tweed
- Posts: 226
- Joined: 21 Jun 2009 8:43 am
- Location: Cardiff, Wales, UK
- Chris Tweed
- Posts: 226
- Joined: 21 Jun 2009 8:43 am
- Location: Cardiff, Wales, UK
- Carl Kilmer
- Posts: 2691
- Joined: 7 Aug 2008 1:23 pm
- Location: East Central, Illinois
Hi Chris, the only lub I ever use is Tri-Flow. Read this post.
http://bb.steelguitarforum.com/viewtopic.php?t=215389
Hope this will help.
Carl
http://bb.steelguitarforum.com/viewtopic.php?t=215389
Hope this will help.
Carl
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
- Joe Naylor
- Posts: 2711
- Joined: 19 Jan 2004 1:01 am
- Location: Avondale, Arizona, USA
Reminds me of a Sho-Bud I worked on - here is the rule -IF IT IS WORE OUT GET NEW PARTS ...... ALL THE LUBE IN THE WORLD WILL NOT HELP.
The one I worked on the phone call started with. "Your Sho-Bud is a quart low" - then he said I tried 5 or 6 different kinds of lub and it did not help.
I agreed and ordered parts.
HE was a steel player and NOT a mechanic or "fix it man"
Joe Naylor
www.steelseat.com
The one I worked on the phone call started with. "Your Sho-Bud is a quart low" - then he said I tried 5 or 6 different kinds of lub and it did not help.
I agreed and ordered parts.
HE was a steel player and NOT a mechanic or "fix it man"
Joe Naylor
www.steelseat.com
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
- Mark Daniels
- Posts: 75
- Joined: 28 Jun 2009 2:07 pm
- Location: United Kingdom
A Marina?? Blimey. You didn't pay actual money to own that did yourichard burton wrote:The last photo reminds me of a horrible few years of my life, when I had the misfortune to own a Morris Marina
As a newbie, I've been extremely careful with psg lube. I finished re-stringing and lubing mine today with gun oil. I didn't use the Finish Line stuff after being warned of it's effects....
A newbie with lots to learn
- Chris Tweed
- Posts: 226
- Joined: 21 Jun 2009 8:43 am
- Location: Cardiff, Wales, UK
- Bo Borland
- Posts: 3947
- Joined: 20 Dec 1999 1:01 am
- Location: South Jersey -
- Contact:
Tri Flow is made by Sherman Williams Co of Cleveland Ohio, USA ..
I buy 2oz (59ml) liquid bottles at the local hardware store..for $3.00 it's either ACE or True Value chain. It comes with a small delivery straw taped to the bottle that allows drop by drop delivery.
The label says to use with adequate ventilation.
I notice a slight aroma, the wife swears I am trying to kill her with it.
The liquid contain PFTE.. (google it) it is teflon. Polytetrafluoroethylene
the oil and the aroma goes away and the teflon remains..
I buy 2oz (59ml) liquid bottles at the local hardware store..for $3.00 it's either ACE or True Value chain. It comes with a small delivery straw taped to the bottle that allows drop by drop delivery.
The label says to use with adequate ventilation.
I notice a slight aroma, the wife swears I am trying to kill her with it.
The liquid contain PFTE.. (google it) it is teflon. Polytetrafluoroethylene
the oil and the aroma goes away and the teflon remains..
- Mark Daniels
- Posts: 75
- Joined: 28 Jun 2009 2:07 pm
- Location: United Kingdom
- Bent Romnes
- Posts: 5985
- Joined: 28 Feb 2007 2:35 pm
- Location: London,Ontario, Canada
- Contact:
Mark, you might luck out finding it at a bicycle repair shop
BenRom Pedal Steel Guitars
https://www.facebook.com/groups/212050572323614/
https://www.facebook.com/groups/212050572323614/
-
- Posts: 236
- Joined: 16 Feb 2010 3:46 pm
- Location: Southern Ireland
I ordered it on ebay a few months ago paid for it by paypal but a few days later the seller told me the postal service wont allow any type of oils to be sent overseas.He refunded me.So i got this wet lube oil in Halfords for racing bikes cost 9 euro seems ok but i thinkthe dry lube might be as good since the wet is for bike chains in wet weather under extreme pressure but i saw a thread by a member using turbine oil for jets and the equivalent Aeroshell 500 is easily available in 500ml cans throughout the uk and ireland.Hope this helps
-
- Posts: 597
- Joined: 10 Jan 2003 1:01 am
- Location: San Jose, California, USA
No, no Bent.Bent Romnes wrote:Mark, you might luck out finding it at a bicycle repair shop
It is in bicycle shops where the "DRY" Teflon (aka "The Spawn of Satan") lives. Avoid any Teflon product from a bike shop; the "DRY" Teflon was designed for bicycles.
The so-called "DRY" Teflon is called that because of the addition of the anti-pedal steel guitar chemical known as paraffin. The paraffin helps protect the Teflon coating on the bicycle chain and gears when riding through pouring rain and riding through muddy fields.
That same paraffin will gum up your precision PSG roller nuts faster than you can say, "Ohmigod, what have I done to my pedal steel?"
I'm sure that there are many sources on the Web to order the regular Tri-Flow from.
Just make sure that it doesn't say "DRY" anywhere on the label.
- Dave
- Per Berner
- Posts: 1808
- Joined: 10 Aug 2004 12:01 am
- Location: Skövde, Sweden
- Contact:
- Chris Tweed
- Posts: 226
- Joined: 21 Jun 2009 8:43 am
- Location: Cardiff, Wales, UK
Okay, here's where (I think) we are UK-wise now:
1. Tri-Flow can't be bought here or imported because of postal restrictions.
2. Its essential ingredient is PFTE, aka Teflon.
3. Any other light oil containing PFTE will do as a substitute, except for products sold in bike shops because they use oils that stick to the chain etc. to protect against the rain.
Is this correct?
I will check out the gun oil Mark mentioned.
Another option is to use the engine oil from an old Morris Marina, but that's even harder to find than Tri-Flow
Chris
1. Tri-Flow can't be bought here or imported because of postal restrictions.
2. Its essential ingredient is PFTE, aka Teflon.
3. Any other light oil containing PFTE will do as a substitute, except for products sold in bike shops because they use oils that stick to the chain etc. to protect against the rain.
Is this correct?
I will check out the gun oil Mark mentioned.
Another option is to use the engine oil from an old Morris Marina, but that's even harder to find than Tri-Flow
Chris
- Bent Romnes
- Posts: 5985
- Joined: 28 Feb 2007 2:35 pm
- Location: London,Ontario, Canada
- Contact:
Dave there are divided opinions on that, which we don't have to get into right now. However, I did in fact get a bottle of "wet" TriFlow at a bike repair shop here. It works great. However, I also find that the jet turbine oil from Mobil works great as well. This is the stuff that Mickey Adams uses with success.Dave Magram wrote:No, no Bent.Bent Romnes wrote:Mark, you might luck out finding it at a bicycle repair shop
It is in bicycle shops where the "DRY" Teflon (aka "The Spawn of Satan") lives. Avoid any Teflon product from a bike shop; the "DRY" Teflon was designed for bicycles.
The so-called "DRY" Teflon is called that because of the addition of the anti-pedal steel guitar chemical known as paraffin. The paraffin helps protect the Teflon coating on the bicycle chain and gears when riding through pouring rain and riding through muddy fields.
That same paraffin will gum up your precision PSG roller nuts faster than you can say, "Ohmigod, what have I done to my pedal steel?"
I'm sure that there are many sources on the Web to order the regular Tri-Flow from.
Just make sure that it doesn't say "DRY" anywhere on the label.
- Dave
BenRom Pedal Steel Guitars
https://www.facebook.com/groups/212050572323614/
https://www.facebook.com/groups/212050572323614/
- Todd Brown
- Posts: 1106
- Joined: 11 Sep 2008 4:26 pm
- Location: W. Columbia , South Carolina
That's what I've been using, the jet engine oil. I saw Mickey recommending this a year or so back, so I set out to get some.
I found out that Mullen sells it in a nice little applicator bottle on their website-
http://www.mullenguitars.com/Oil%20Bottle.htm
I've since used this bottle on a few different guitars routinely and I've only used 1/3 of it!
You U.K. guys should do fine with any high grade synthetic turbine oil equivalent, that's what Mullen uses on the guitars they build.
I'm glad this thread started because, I've seen several people say the "dry" tri-flow with the teflon is what you want. Now its "the spawn of Satan"?
I found out that Mullen sells it in a nice little applicator bottle on their website-
http://www.mullenguitars.com/Oil%20Bottle.htm
I've since used this bottle on a few different guitars routinely and I've only used 1/3 of it!
You U.K. guys should do fine with any high grade synthetic turbine oil equivalent, that's what Mullen uses on the guitars they build.
I'm glad this thread started because, I've seen several people say the "dry" tri-flow with the teflon is what you want. Now its "the spawn of Satan"?
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
Todd, I suspect that the people who advocated the paraffin based Triflow were simply mistaken as to which one was correct for the steel guitar.
I've been using Triflow for almost 15 years on all kinds of industrial mechanical equipment, household mechanisms, consumer devices and, of course, steel guitars. It works superbly in all these situations and lasts far longer than any oil I've ever tried...and I tried all the best.
Now, there may be other formulations, or lubes, that might work as well, or possibly better, but I'm a firm believer in not fixing what's not broke. Triflow has never let me down, so I "stick" with it. (no pun intended )
Oh, and one more thing, if you're going to store a guitar for a long time....Triflow doesn't dry out over time.
I've been using Triflow for almost 15 years on all kinds of industrial mechanical equipment, household mechanisms, consumer devices and, of course, steel guitars. It works superbly in all these situations and lasts far longer than any oil I've ever tried...and I tried all the best.
Now, there may be other formulations, or lubes, that might work as well, or possibly better, but I'm a firm believer in not fixing what's not broke. Triflow has never let me down, so I "stick" with it. (no pun intended )
Oh, and one more thing, if you're going to store a guitar for a long time....Triflow doesn't dry out over time.
Best regards,
Mike
Mike
- Brendan Mitchell
- Posts: 1506
- Joined: 26 Nov 2000 1:01 am
- Location: Melbourne Australia
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
- Mickey Adams
- Posts: 5134
- Joined: 26 Jan 2004 1:01 am
- Location: Bandera Texas
- Contact:
I ALWAYS wear rubber gloves when tearing down guitars..yuk!
ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders!
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders!