Why don't folks use this thumb pick?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Why don't folks use this thumb pick?

Post by Steve Lipsey »

The rounded edges give no more string noise than plastic picks (unlike the flatter metal picks), which is the usual reason for not using metal on your thumb (i.e., on the wound strings)..at least according to my unscientific testing....

It seems metal is better for picking - or why use metal finger picks on the unwound strings?

...and they don't get soft or slippery when hot, and can be sized to fit comfortably.....I have them from my slide guitar/dobro days and haven't switched to plastic....

Is plastic better? Why?

Thanks...

Image
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

My experience is that they give more scratch noise. I don't need to add more noise.
Last edited by Lane Gray on 12 Nov 2011 5:48 pm, edited 1 time in total.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
Billy McCombs
Posts: 1211
Joined: 22 Aug 2007 11:13 am
Location: Bakersfield California, USA

Post by Billy McCombs »

Steve I use them and have for 4 yrs. I had a problem with the plastic one breaking. I read were Bobbe Seymour of Steel guitar Nash. said that a lot of Pros were using metal thumb picks so I gave it a try. I really like them and they don't break. PS Sarah Jory uses them.
78 Emmons PP,Great tone.82 Emmons SKH #56
User avatar
Jerry Hayes
Posts: 7489
Joined: 3 Mar 1999 1:01 am
Location: Virginia Beach, Va.

Post by Jerry Hayes »

I like to use the same thumbpick for steel and guitar which requires some back and forth movement (like a flatpick) and these don't work well for that. Also I can sense a little sizzle when attempting to pick block with a metal thumbpick which you don't get with the Herco nylons that I use.......JH in Va.
Don't matter who's in Austin (or anywhere else) Ralph Mooney is still the king!!!
User avatar
Pat Haley
Posts: 38
Joined: 7 Aug 2009 2:58 pm
Location: Walker, LA USA

Post by Pat Haley »

I bought 2 thumb picks from Blue Chip Picks to play my reso. I have not had a chance to try them on the PSG. Hope to try them when I get home next week. Here is a link.

http://shop.bluechippick.net/

I also ordered some ProPicks. Again I will try them next week when I get home. Here is their link.

http://www.guptillmusic.com/index.html

Has anyone tried these?
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

Pat-
I switched from propicks (from slide and dobro days) to National or Jeff Newman picks....the propicks bend too easily and get folded over, and the double tab kind are really comfortable but the lower tab catches on the strings of a pedal steel...
User avatar
Geoff Cline
Posts: 748
Joined: 6 Jul 2009 7:36 am
Location: Southwest France

Some folks DO use this pick

Post by Geoff Cline »

See my avatar. I also use blue Chip thumb picks...but I LOVE my OLD National!
User avatar
Larry Chung
Posts: 962
Joined: 8 Aug 2001 12:01 am
Location: San Francisco, CA, USA
Contact:

Post by Larry Chung »

I have used metal thumbpicks for many years. I use an old National (very similar to the Dunlop) for banjo and Dobro. They don't wear down as easily as plastic, and I really didn't like the raspy sound I got from a worn plastic thumbpick. They do wear down eventually, fwiw.

I use a Propick for my pedal steel work. I like the thin blade, feels very accurate and precise. I do like the fact that a metal band is pretty easy to fit to the thumb. And to adjust.

I have found that metal picks are a tad heavier than plastic, and my speed (especially on banjo) is affected, but not in a terribly significant way.

The Blue Chip (great flatpicks) was a little too slick on the strings for me. I like a bit of grab.
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Because I use something else. Actually, I have never heard or tried a metal thumb pick that I like the tone from. I am perfectly happy with my Golden Gate thumb picks.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
Mike Pace
Posts: 79
Joined: 8 Mar 2005 1:01 am
Location: O.S. CT. USA

Post by Mike Pace »

I have a couple of the National style ones in my bag, but for the past several years I've used the Propicks metal thumbs..... I like them a lot, and have given some away to fellow steelers around here, with positive feedback. Even when playing tele, I now find it hard to go back to plastic.
Jerry Tillman
Posts: 520
Joined: 29 Sep 2002 12:01 am
Location: Florida

Thumb pick thief

Post by Jerry Tillman »

I gave Russ Hicks a thumb pick made out of tortoise shell,very hard to make,to give to Buddy Emmons.He kept it and never gave it to him.Great sounding pick.
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

I guess metal thumb picks aren't as uncommon as I thought....some like 'em, some don't, that's just the way things go...but at least I don't feel like I am crazy or stupid, now...
Post Reply