***BIG Tuning Wrench*** +All Sold Out--Please Close b0b+
- Jerry Foster
- Posts: 912
- Joined: 18 Oct 2007 12:09 pm
- Location: Missouri, USA
tuning wrench
Thanks Carl for your fast reply & service. I received the tuner wrench today. its perfect . from now on I'll hide that rascal. hopefully not from myself .again thanks & God Bless. Jerry f.
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
Lost Wrenches in High Weeds! :)
Much obliged Jerry for the repeat business! I may have to come up with either a "GPS Locatable" wrench or "Glow in the Dark" model! I didn't design the wrench with legs, but there have been a few, according to fellow steelers who've lost their wrench recently, have just walked off! Take care....Carl
-
- Posts: 51
- Joined: 16 Aug 2005 12:01 am
- Location: Louisiana, USA, R.I.P.
Carl;
Please E-Mail me and tell me how to make the money
order out, an address to mail to, and exactly how much
including shipping for 2 of them. royce_tarver4@hotmail.com or 225 622 5581.
Thanks
Royce
Please E-Mail me and tell me how to make the money
order out, an address to mail to, and exactly how much
including shipping for 2 of them. royce_tarver4@hotmail.com or 225 622 5581.
Thanks
Royce
- Eugene Cole
- Posts: 514
- Joined: 1 Feb 2002 1:01 am
- Location: near Washington Grove, MD, USA
- Contact:
Well I took the bait and my $15 is on the way to Carl.
Hoping I do not have to make much use of it... but know that I will.
Hoping I do not have to make much use of it... but know that I will.
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
Wrench Orders
Hey Royce & Eugene,
Sorry for the delayed response but we've been fightin' Twisters & Earthquakes here in Indian Territory! Royce, your two wrenches will go out tomorrow and Eugene your wrench will also be mailed out. (Thanks for takin' the bait Eugene ) Appreciate the business and please let me know when you get them and how they work for you? Thanks, Carl
p.s. As a friendly reminder, if you buy a wrench and it just doesn't work for you, I'll buy it back...not a problem!
Sorry for the delayed response but we've been fightin' Twisters & Earthquakes here in Indian Territory! Royce, your two wrenches will go out tomorrow and Eugene your wrench will also be mailed out. (Thanks for takin' the bait Eugene ) Appreciate the business and please let me know when you get them and how they work for you? Thanks, Carl
p.s. As a friendly reminder, if you buy a wrench and it just doesn't work for you, I'll buy it back...not a problem!
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
-
- Posts: 29
- Joined: 17 Oct 2011 10:42 am
- Location: Berkeley, CA
- Contact:
- Eugene Cole
- Posts: 514
- Joined: 1 Feb 2002 1:01 am
- Location: near Washington Grove, MD, USA
- Contact:
Here is my review of this item after using it.
Here is my review of this item after using it: I like it!Eugene Cole wrote:Well I took the bait and my $15 is on the way to Carl.
Hoping I do not have to make much use of it... but know that I will.
$15 incuding shipping and handling to my door for a tool that does what it is supposed to do better than the tool I was using previously was money well spent.
They would make a nice stocking stuffer for the upcoming Solstice/Yule/Xmas/Hannakuh/et cetera holiday season.
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
-
- Posts: 173
- Joined: 25 Aug 2009 9:08 am
- Location: Fort Worth,Tx. USA
Big Tuning Wrench
Wow like that BIG wrench lot easier to turn etc. These old hands dont have grip used to have...
Thanx Carl
Thanx Carl
D10 Sho-Bud,D10 Mullen Pre RP, Session 500, N12
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
Satisfied Customers---:))))))))))))))))))))))
Stephen, Eugene and Doug,
Gosh fellas, your comments are much appreciated! I've said it many times and I'll say it again, until you've tried the wrench, you really don't know what you're missing; No brag, Just fact! Thanks again gentlemen....Happy Thanksgiving! Carl
Gosh fellas, your comments are much appreciated! I've said it many times and I'll say it again, until you've tried the wrench, you really don't know what you're missing; No brag, Just fact! Thanks again gentlemen....Happy Thanksgiving! Carl
- Gary Preston
- Posts: 3995
- Joined: 8 Apr 2003 12:01 am
- Location: Columbus, Ohio, USA
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
-
- Posts: 48
- Joined: 20 Aug 2009 2:24 pm
- Location: Texas, USA
big tuning wrench
all the response great, i'd like to have one. sent email, no response.
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
Hey Mike,
So very sorry for the delayed response, but I never received your email. Give me another try with an email to: carlwilliams2@att.net I try to respond every day (Morning & Night) and haven't missed too many over the last four years...I hope anyway! Of course, I can't do business while at my job, 8-5 for obvious reasons. Again my apologies. Carl
So very sorry for the delayed response, but I never received your email. Give me another try with an email to: carlwilliams2@att.net I try to respond every day (Morning & Night) and haven't missed too many over the last four years...I hope anyway! Of course, I can't do business while at my job, 8-5 for obvious reasons. Again my apologies. Carl
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
-
- Posts: 861
- Joined: 4 Aug 1998 11:00 pm
- Location: Nash. Tn USA
- Contact: