Shobud Fingertips and Permanents----got a picture??

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

E9 Keyhead....
Image
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

I've got the E9 side torn down for a rebuild now.
Last edited by Jake Gathright on 20 Jul 2011 4:41 pm, edited 1 time in total.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Beautiful! Offset 5th and 6th string tuners. 1963.
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

After a little polishing...
Image
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

De-Gunking and Re-chasing all of the threaded adjustments on the entire guitar.
Image
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

Should I re-finish the cabinet??? Instrument construction and finishing is something I'm pretty fimiliar with...
Image
User avatar
Bob Muller
Posts: 891
Joined: 9 Jan 2008 11:50 am
Location: Oregon, USA

Post by Bob Muller »

Jake, great-looking project you have going there, looks like you've got a great start on a restoration. How about some photos of the bottom side, it's always interesting to see what's going on inside. Now that you have such a good start it seems like would be the time to go ahead and do the whole guitar. Along with a nice refinishing job the guitar would look like new again. I'm working on a similar project, photos were posted just above yours. How about posting the serial number also, we're still trying to figure out if there's any pattern to these.
Image
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Bob,
My Permanent does not have a serial number, but it's older than Jake's, so maybe his does. But Bobbe told me it was not uncommon for Perms to not be numbered. But you would think,,, by 1963, they would.
User avatar
Bob Muller
Posts: 891
Joined: 9 Jan 2008 11:50 am
Location: Oregon, USA

Post by Bob Muller »

John, No Idea what year mine is but it has no serial number. Still not sure what all that means,but if we get more examples it may make sense someday. James has come up with some odd examples also.
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

This is the only serial-like number on the guitar, and in person, it clearly reads "1065". However, Bass side changer mount brackets on each end of the changer's axle that affix the changer to the housing plate and the housing plate itself have the roman numeral IV (4) scratched into the underside of them.
Image
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

RKR added by Jim Evans circa??? :\
Image
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Bob,
"James has come up with some odd examples also."

I thought James was working on serial numbers for Fingertips????? My Fingertip has one of those odd numbers.
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

Or maybe it was the LKL...
Image
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Jake!
Interesting! Still using the welded bellcranks. A short time later, they switched to using the same moveable bellcranks as used in F-Tips. I've seen underside pics of later Perms, where it was hard to tell whether it was a F-Tip or a Perm! Without seeing the changer of course. They didn't need two distinct parts designs. Just used the same parts for both models. So,,, those later Perms weren't so "permanent!"
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Jake,
I've never seen a serial number like that. They were stamped. But maybe yours was right before they started doing that? Bobbe S. might know.
User avatar
Bob Muller
Posts: 891
Joined: 9 Jan 2008 11:50 am
Location: Oregon, USA

Post by Bob Muller »

Jake, or John Did you notice the Return springs connected to the fingers?? I don't recall seeing that type Springs on the permanents, kind of different even from the fingertip style. It always amazes me to see what is under one of these guitars. Looks like some black spray is gotten onto the sides of the cabinet, might be a good time that refinishing you were talking about. It's interesting that the cross shafts and center bracing look to be fingertip style, but it still has welded pullers. As always no two look the same.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Bob,
Never seen anything like those before. Just went through a ton of pics of Perms that I've kept. The older ones have no springs, like mine They don't even look the slightest bit Shobudish!
Here's a pic of an older one;

Image
User avatar
Bob Muller
Posts: 891
Joined: 9 Jan 2008 11:50 am
Location: Oregon, USA

Post by Bob Muller »

John, this guitar also appears to have returned Springs out in the body of the guitar, I'm not quite sure how you could do a lower with this arrangement, interesting layout!! There appears to be screws in the ends of the fingers that the Springs attached to, I've not seen this before, always something new.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Bob, on the old guitar I posted, notice which neck the first three pedals go to.
User avatar
Bob Muller
Posts: 891
Joined: 9 Jan 2008 11:50 am
Location: Oregon, USA

Post by Bob Muller »

John, yes it looks like the necks are reversed, my question is what does the knee lever connected to??
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

I zoomed in. Looks like it's the neck selector switch! And, from the mounting parts, it would appear to be original! Darn! Now I've seen everything!
User avatar
Jake Gathright
Posts: 129
Joined: 19 Jul 2011 6:14 pm
Location: Foreman, Arkansas, USA

Post by Jake Gathright »

THe way that RKR lever wasn't even designed to clear the cabinet and the way the LKL lever seems to be quite obviously an aftermarket addition kinda makes my mind wonder if this guitar left the factory with any knees whatsoever... Man, If only these ol' electric tables could tell us their stories... BUt I'm gonna give Jim Evans a call this evening and see what kinds of history he might be able to give me on the thing, seeing as how it used to belong to him. :mrgreen:
User avatar
James Morehead
Posts: 6944
Joined: 19 May 2003 12:01 am
Location: Prague, Oklahoma, USA - R.I.P.

Post by James Morehead »

Jake, What a nice perm you scored. Now you are properly corrupted for sure!! 8)
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net
Jackie Anderson
Posts: 512
Joined: 17 Jun 2002 12:01 am
Location: Scarborough, ME

Post by Jackie Anderson »

...they switched to using the same moveable bellcranks as used in F-Tips.
So, those later Perms weren't so "permanent!"
So what should those be called? "Impermanent?" Or are these the real "Universal" models? As much as I love the round front era Buds, I think these in-between ones are really great. I'd be interested to know how many there are around -- and whether any two are alike.

Jack
User avatar
James Morehead
Posts: 6944
Joined: 19 May 2003 12:01 am
Location: Prague, Oklahoma, USA - R.I.P.

Post by James Morehead »

Here's a good read on Lloyd Green and his fingertip called the "LIghtening Bolt" when he did the Panther Hall album with Charlie Pride. Enjoy.

http://bb.steelguitarforum.com/viewtopi ... r+hall+jbl
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net
Post Reply