| Author |
Topic: Compatible Reverb Tank? |
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 25 May 2011 5:11 am |
|
Is it possible to use a Session 400 reverb tank with a Session 400 Limited amp with an adapter connection (RCA to Molex)? Or maybe the tank is not electronically compatible? Otherwise, I need to find a Session 400 Limited tank.
Thanks,
Dennis
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 25 May 2011 6:01 am
|
|
Same tank will work in both.
Most of the early Peavey steel amps had 2 spring tanks (4EB2C1B) and the later ones used 3 spring tanks (9EB2C1B). Both have similar input and output impedances and will interchange. |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 26 May 2011 9:55 am
|
|
hey ken...how about the tanks in nash400 to ltd400?
will they interchange?
thanx for sharing. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 26 May 2011 10:11 am
|
|
| same applies |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 26 May 2011 4:15 pm
|
|
| I've found that the "X"EB2C1B were used a lot in all the SS driven units. 70's Acoustic Control, Peavey, Rickenbacker, and most of the SS driven Fender. |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 27 May 2011 5:04 am
|
|
I need the schematic (in,out/pos,neg) for the Limited. It has 4 male pins and my old tank has RCA connections. Can anyone guide me?
Thanks,
Dennis
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 27 May 2011 7:56 am
|
|
The tank end of the Peavey harness is male RCA connections and the other end is a 5 pin Molex connector with 4 pins used.
 |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 27 May 2011 11:17 am
|
|
That's what I needed! Thanks Ken, I appreciate the info very much!
Dennis
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
