Suggestions for tone, please

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Post Reply
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Suggestions for tone, please

Post by Lynn Oliver »

With all the usual caveats about subjectiveness and live vs. recorded tones, I'd like to hear suggestions of recorded tracks that demonstrate good non-pedal tone. I'm interested both in the range of sounds that people are getting as well as what people like the best. And it's tone I'm after here, not simply great players.

So, what are your favorites? I'd prefer recordings that are still available, and if they are obscure some hints about where to find them would be appreciated.

Thanks...
Danny Peters
Posts: 28
Joined: 12 Jan 2011 10:31 am
Location: New York, USA

Post by Danny Peters »

This doesn't exactly answer the question, but I find it interesting that when I listen to Speedy West on the album "Stratosphere Boogie," I sometimes think, "Man, that sounds like my crappy Artisan through my crappy 9-volt Fender Mini-Twin, except that it's Speedy West so it also sounds awesome." Not the whole album, of course, but some of it.

I like Lee Jeffriess' tone on the Big Sandy & His Fly-Rite Boys album "Feelin' Kinda Lucky."

I also really like the tone Al Perkins gets on his pedal steel on the Flying Burrito Brothers' live version of "Six Days on the Road," which can be found on YouTube. Not a tone that works everywhere, but it's perfect for that particular performance.
Ron Whitfield
Posts: 6895
Joined: 15 Nov 2002 1:01 am
Location: Kaaawa, Hawaii, USA
Contact:

Post by Ron Whitfield »

Anything by Bobby Ingano. Jerry Byrd wasn't too shabby at the tone end, either...
User avatar
Michael Maddex
Posts: 1141
Joined: 18 Apr 2007 5:02 pm
Location: Northern New Mexico, USA
Contact:

Post by Michael Maddex »

This may not directly address your question either, but do you have a copy of the Forum Showcase CD? There is a wide variety of tone demonstrated there. If you need one, you can order it from b0b at the new store link at the top of the page. HTH.
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
User avatar
Jay Fagerlie
Posts: 1637
Joined: 14 Nov 2003 1:01 am
Location: Lotus, California, USA
Contact:

Post by Jay Fagerlie »

Lynn,
As far as non-pedal tone, my favorite is Jeremy Wakefields Steel Guitar Caviar
Awesome tone and awesome playing.
It has EccoFonic on the label, so maybe it was recorded by Deke Dickerson?

The Biller And Wakefield album sounded just as great.

Joel Patterson Steel is Real is another good sounding cd-not all tracks are non pedal.

Ja

PS Lynn, I think both Jeremy and Joel are members of the forum and post from time to time....J
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Post by Lynn Oliver »

Ron Whitfield wrote:Anything by Bobby Ingano. Jerry Byrd wasn't too shabby at the tone end, either...
Hi Ron, I found Bobby Ingano's Steel Reflections and he does get a really nice tone.
Michael Maddex wrote:This may not directly address your question either, but do you have a copy of the Forum Showcase CD?
Michael, I was not aware of this CD so I'll have to hit the store tomorrow.
Jay Fagerlie wrote:As far as non-pedal tone, my favorite is Jeremy Wakefields Steel Guitar Caviar
Jay, thanks for bring this one to my attention. I already have that album in my library (probably because he's playing a Bigsby and I have a Clinesmith).

Thanks to everyone that responded.
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Post by Lynn Oliver »

I supposed this was inevitable. :D

I've been listening to Jeremy Wakefield, and while I understand how to get his live sound, I'm stumped by what is going on with the recorded tracks on Steel Guitar Caviar. His recorded tone is rounder and fuller than his live tone.

What kinds of processing might have been done to get the recorded tone?
User avatar
Jay Fagerlie
Posts: 1637
Joined: 14 Nov 2003 1:01 am
Location: Lotus, California, USA
Contact:

Post by Jay Fagerlie »

Forum calling Jeremy!

Send him a PM, he might answer.

Jay
User avatar
Jay Fagerlie
Posts: 1637
Joined: 14 Nov 2003 1:01 am
Location: Lotus, California, USA
Contact:

Post by Jay Fagerlie »

Another thing Lynn,

Ya know, you can't go wrong with an old low power tube amp.

The other part is the hands-it's all in the hands.
Anything that is recorded has went through so much as far as the signal path-you could never really duplicate the sound.
But heres the thing-listen to people that you like and notice how they always sound good-cause it's in their hands.....the hands are key.....all good players sound like themselves, no matter what they use to amplify themselves with.
Off my soapbox....
Jay
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Post by Lynn Oliver »

I hear you, Jay! I come from an acoustic background and appreciate how much of the sound is in your hands. But I guess I'm still going to need an amp and maybe some other gear, so it'd be nice to get a feel for how it's done.
User avatar
Jay Fagerlie
Posts: 1637
Joined: 14 Nov 2003 1:01 am
Location: Lotus, California, USA
Contact:

Post by Jay Fagerlie »

Do you have any 6 string buddies into old tube amps?
I use on occasion all of the following with different and excellent results:
59 Fender Princeton
early 60s Valco 1606
59 Wards twin 12 (sleeper amp)
Early 60s Ampeg Gemini II
"Earth Sound Reaserch" tube head
Sano 500WC
Gibson GA19T
63 Fender Bassman
Carvin Vintage 33 combo
Roland microcube- ok for practice (great for the $$$)
Kalamazoo Reverb 12 (Killer amp)
Univox U??? 3 12Au&s and 2 6l6s
Carvin XV100 w/15" (100 watt) combo

Look around and see what you can borrow and see if any of them do it for you.
That is the fun part ;)
Jay
User avatar
Jon Nygren
Posts: 322
Joined: 18 Jun 2008 10:21 am
Location: Wisconsin, USA

Post by Jon Nygren »

Lynn, what amp are you using?

I heard JW used a tweed twin on SGC, I could be wrong though.

A tube amp, IMO, is the way to go. Don't be afraid of a little distortion. Any of the 50's type amps would probably be the way to go.

I have two 50's era rickenbacker amps that I use and am very happy with. I also have a hybrid Standel that sounds great but it's a cleaner tone, more solid in the bottom. I prefer the ricks at lower volumes...bouncier and thicker.
Ron Whitfield
Posts: 6895
Joined: 15 Nov 2002 1:01 am
Location: Kaaawa, Hawaii, USA
Contact:

Post by Ron Whitfield »

For lower wattage amps for steel, it's really hard to beat the 60s era Magnatone/Estey models, sturdy and exceptional sound, probably way different than any other old amps. I like mine http://www.vibroworld.com/magnatone/M10A.html

Jimmy Bryant liked them, bought them, and used them. His personal amp was the top line Imperial http://www.vibroworld.com/magnatone/M13.html
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Post by Lynn Oliver »

I'm using one of Ken Fox's 5D6B (4x10) amps and/or a Fractal Axe-Fx. Mostly I'm using the straight signal from the Clinesmith, but with a bit of delay and a bit of reverb added in.
User avatar
Jay Fagerlie
Posts: 1637
Joined: 14 Nov 2003 1:01 am
Location: Lotus, California, USA
Contact:

Post by Jay Fagerlie »

Sounds like you already have quite the tone machine there Lynn.
Is there a reason your still looking for something different, if you are in fact looking?
Jay
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Post by Lynn Oliver »

I'm not looking for anything different... I'm just trying to learn how to get certain kinds of tone with what I have now.
User avatar
Jan Viljoen
Posts: 480
Joined: 30 Mar 2011 7:00 am
Location: Pretoria, South Africa

Post by Jan Viljoen »

@Jay Fagerlie

I use a transistor Yamaha 65D with my lap steels and i like the sound.
I also use it with my acoustic electric mandolins.
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Danny Peters
Posts: 28
Joined: 12 Jan 2011 10:31 am
Location: New York, USA

Post by Danny Peters »

I don't recall seeing this mentioned, but if the pickups are adjustable you could try raising and lowering them for different tonal variations.
User avatar
Lynn Oliver
Posts: 1110
Joined: 19 Jul 2006 12:01 am
Location: Redmond, Washington USA * R.I.P.
Contact:

Post by Lynn Oliver »

Ron, you get the cigar. I heard from Jeremy that he probably used his Magnatone Triplex on that album. I'd never heard of those amps before this.
Ron Whitfield
Posts: 6895
Joined: 15 Nov 2002 1:01 am
Location: Kaaawa, Hawaii, USA
Contact:

Post by Ron Whitfield »

Well, maybe just the stogie, they are different amps. Here's what the Triplex looks like from the prior generation to the Estey's http://www.vibroworld.com/magnatone/180.html

I don't know as the TP schematic carried over into the 60s as some Mag designs did.
Jeremy Wakefield
Posts: 11
Joined: 4 Jan 2009 2:15 pm
Location: Portland, OR

Post by Jeremy Wakefield »

Howdy Friends,
I wasn't paying attention there until I got your message, Lynn! Thanks again for the compliments; like I said, it helps a lot to be surrounded by highly competent musicians and a great engineer/producer (Deke Dickerson)!
The amp I use the most looks just like the Magnatone in the link that Ron posted. It works best in a live situation, but I've also used it on lots of recordings, including The Lucky Stars, Bonebrake Syncopators, and the Spongebob Squarepants series.
I've also had pretty good luck with an inexpensive little hybrid Epiphone (Gibson-manufactured) amp, it's an Electar Tube 10 like the one pictured here:
http://www.gibson.com/Files/aaFeaturesI ... Tube30.jpg
It was pretty inexpensive on ebay, and has been really versatile as well.
Now that I think of it, after reading Jon Nygren's post above, I MAY have been borrowing one of Deke's hybrid Standel amps..
User avatar
Jon Nygren
Posts: 322
Joined: 18 Jun 2008 10:21 am
Location: Wisconsin, USA

Post by Jon Nygren »

Didn't Vance Terry use a Maggie 180 with his Bigsby alot? Thats a great tone there(and the hands probably have alot to do with that).
Post Reply